| 薄壁零件的高速铣削振动研究 |
| |
| 引用本文： | 汪通悦,何宁,李亮.薄壁零件的高速铣削振动研究[J].南京航空航天大学学报(英文版),2007,24(2):112-117. |
| |
| 作者姓名： | 汪通悦 何宁 李亮 |
| |
| 作者单位： | 1. 南京航空航天大学机电学院,南京,210016,中国;淮阴工学院数字化制造技术实验室,淮安,223001,中国
2. 南京航空航天大学机电学院,南京,210016,中国 |
| |
| 基金项目： | 国家自然科学基金
,
江苏省自然科学基金
,
江苏省高校自然科学基础研究计划项目
,
淮安市工业发展基金 |
| |
| 摘 要： | 为研究薄壁零件加工的振动机理,本文在考虑动态切削厚度的变化以及顺铣和逆铣之间差别的基础上,建立了一个薄壁零件立铣的力学模型,并用两个铣削实例加以验证.结果表明,该模型可以预测动态铣削过程中的切削力和振动位移.
|
| 关 键 词： | 薄壁零件 振动 力学模型 切削参数 thin-walled component vibration mechanistic model cutting parameter 零件 高速铣削 振动研究 COMPONENTS MILLING Experimental results show predict force simultaneously process end milling experiments verify dynamic model flexible structures based variations |
| 文章编号： | 1005-1120（2007）02-0112-06 |
| 修稿时间： | 2006-06-272006-10-23 |
VIBRATION IN HIGH-SPEED MILLING OF THIN-WALLED COMPONENTS |
| |
| Wang Tongyue,He Ning,Li Liang.VIBRATION IN HIGH-SPEED MILLING OF THIN-WALLED COMPONENTS[J].Transactions of Nanjing University of Aeronautics & Astronautics,2007,24(2):112-117. |
| |
| Authors: | Wang Tongyue He Ning Li Liang |
| |
| Institution: | 1. College of Mechanical and Electrical Engineering, NUAA, 29 Yudao Street, Nanjing, 210016, P. R. China~ 2. Digital Manufacturing Technology Lab, Huaiyin Institute of Technology, Huait an, 223001, P. R. China |
| |
| Abstract: | To investigate the vibration principle in machining thin-walled components, a dynamic model for end milling of flexible structures is built based on considering the variations in the dynamic chip thickness and the differences between up-milling and down-milling. Two milling experiments verify the model. Experimental results show that the model can predict the milling force and displacements simultaneously in the dynamic milling process. |
| |
| Keywords: | thin-walled component vibration mechanistic model cutting parameter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
