| 轴对称射流矢量喷管非矢量状态下推力特性研究 |
| |
| 引用本文： | 张群峰,吕志咏.轴对称射流矢量喷管非矢量状态下推力特性研究[J].航空计算技术,2009,39(3):29-33. |
| |
| 作者姓名： | 张群峰 吕志咏 |
| |
| 作者单位： | 1. 北京交通大学,土建学院,北京,100024
2. 北京航空航天大学,流体力学研究所,北京,100083 |
| |
| 摘 要： | 通过数值模拟,研究了非矢量状态下（射流流流量为零）轴对称射流矢量喷管在低落压比时（NPR≤3.5）,射流缝内形成的空腔流动对喷管推力特性的影响;利用这种影响来控制低落压比时喷管的气流分离位置,提高了喷管处于低落压比时的喷管推力系数;推力系数可以提高到0.90以上。因此合理布置双连通射流缝的位置,不仅有利于提高射流的推力矢量效率,而且有利于提高低落压比无次流时的推力系数,从而弥补射流矢量喷管几何固定带来的不足。
|
| 关 键 词： | 矢量喷管 落压比 推力系数 |
Characteristics of Fluidic Axisymmetric Thrust-vectoring Nozzle without Injection |
| |
| ZHANG Qun-feng,LV Zhi-yong.Characteristics of Fluidic Axisymmetric Thrust-vectoring Nozzle without Injection[J].Aeronautical Computer Technique,2009,39(3):29-33. |
| |
| Authors: | ZHANG Qun-feng LV Zhi-yong |
| |
| Institution: | 1.School of Engineering and Architecture;Beijing Jiaotong University;Beijing 100044;China;2.Institute of Fluid Mechanics;Beihang University;Beijing 100083;China |
| |
| Abstract: | To improve the thrust efficiency of the nozzle at over expanded condition （ NPR ≤ 3.5 ） without injection flow, the effect of the injection slots on primary flow has been studied by numerical simulation. The results indicate that the cavity flow over injection slots can change the flow separation position on the nozzle wall and increase the thrust effi- ciency at low NPR（ nozzle pressure ratio）. The thrust efficiency of the nozzle can be improved over 0.90. So To set the connected injection slots reasonably can improve the thrust efficiency with injection or without injection at low NPR. |
| |
| Keywords: | thrust vectoring nozzle NPR thrust coefficient |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
