工艺参数对线性摩擦焊接45#钢温度场及轴向缩短量影响的数值模拟分析 |
| |
引用本文: | 马彩霞,李文亚,陈亮,马铁军.工艺参数对线性摩擦焊接45#钢温度场及轴向缩短量影响的数值模拟分析[J].航空制造技术,2011(Z1). |
| |
作者姓名: | 马彩霞 李文亚 陈亮 马铁军 |
| |
作者单位: | 西北工业大学摩擦焊接陕西省重点实验室; |
| |
基金项目: | 国家自然科学基金项目(51005180); 西北工业大学翱翔之星计划; 教育部留学回国人员科研启动基金项目(N9YK0003);教育部新世纪优秀人才计划(nect-08-0463);教育部博士点基金新教师基金项目(NAYD0005)资助 |
| |
摘 要: | 基于ABAQUS/Explicit显式有限元分析软件,采用开发的线性摩擦焊接同质接头的二维计算模型,研究了工艺参数对线性摩擦焊接45#钢接头温度场和轴向缩短量的影响。结果表明,提高振动频率、振幅、摩擦压力,界面温度能在更短时间上升至较高温度,且轴向缩短量以较快速率达到更大值,3者对计算结果的影响,统一于热输入功率;当热输入功率超过某一临界值时,缩短量与其呈线性关系。
|
关 键 词: | 线性摩擦焊 数值模拟 Johnson-Cook 模型 热输入 |
Numerical Analysis of Different Parameters Effect on Temperature Field and Axial Shortening of Linear Friction Welding 45# Steel Joint |
| |
Abstract: | A two-dimensional finite element model of linear friction welding(LFW) of similar joints is developed based on the ABAQUS/Explicit software.The effects of processing parameters on the temperature field and axial shortening of LFW 45# steel joints are investigated systematically.The results show that the interface temperature reaches quickly up to a higher temperature in a shorter time and the axial shortening increases to a greater value at a faster rate through increasing oscillation frequency,amplitude an... |
| |
Keywords: | Linear friction welding Numerical Simulation Johnson-Cook model Heat input |
本文献已被 CNKI 等数据库收录! |