首页 | 本学科首页   官方微博 | 高级检索  
     检索      

超燃冲压发动机进气道低马赫数起动性能研究
引用本文:于海顺,宋文艳,张志强.超燃冲压发动机进气道低马赫数起动性能研究[J].航空工程进展,2011,2(4):459-464.
作者姓名:于海顺  宋文艳  张志强
作者单位:西北工业大学动力与能源学院,西安,710072
摘    要:为探讨高超声速进气道在低马赫数普遍存在的起动问题,采用等激波强度法设计了超燃冲压发动机二维混压式前体/进气道,给出了前体/进气道的几何尺寸,对所设计的进气道在设计状态、非设计状态的性能与流场进行了数值模拟,对低马赫数下进气道的起动问题进行了研究。研究表明:设计的进气道附加阻力较小,总压恢复系数较高,在低马赫数下通过附面...

关 键 词:超燃冲压发动机  进气道  起动性能  附面层抽吸

Research on Start Characteristics of Scramjet Inlet in Low Mach Number
Yu Haishun,Song Wenyan,Zhang Zhiqiang.Research on Start Characteristics of Scramjet Inlet in Low Mach Number[J].Advances in Aeronautical Science and Engineering,2011,2(4):459-464.
Authors:Yu Haishun  Song Wenyan  Zhang Zhiqiang
Institution:(School of Power and Energy.Northwestern Polytechnical University.Xi’an 710072,China)
Abstract:The starting of hypersonic inlet is a common question at low Mach number condition. In this paper a 2-D scramjet mixed-compression inlet is designed by the method of constant shock intensity, the inlet configuration is present. The inlet flow field and performance at design and off-design points are simulated by numerical approach, the start characteristics at low Mach number was investigated. It shows that, the additional drag of the designed inlet is low and the total-pressure recovery coefficient is high; at the low Mach number, the start requirement can be satisfied by adding the boundary layer suction installation; the inlet starting characteristics is sensitive to suction location, the suction position upstream of recirculation zone is of the most effectiveness.
Keywords:scramjet  inlet  start characteristics  boundary layer suction
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号