航空发动机风扇转子叶片外物损伤II.鸟撞击数值仿真(英文)

鸟撞击是飞行安全最严重的威胁之一。鸟撞击的后果非常危险,因而,在进入服役之前,飞机部件必须通过抗鸟撞认证。航空发动机风扇转子叶片是容易受到飞鸟撞击的飞机部件之一,在设计时必须考虑使航空发动机风扇转子叶片具有抗鸟撞击的能力,降低由于鸟撞击叶片而引起的飞行事故。采用接触冲击算法,对航空发动机风扇转子叶片进行了模拟鸟撞击数值仿真。针对风扇叶片具有阻尼凸台的特点,分析中建立了三叶片组计算模型。得到了对应试验测试点的模拟鸟撞击叶片的瞬态响应曲线、叶片的位移和当量应力。比较了试验中和数值仿真中模拟鸟撞击叶片的瞬态响应曲线,试验中测试点与数值仿真中对应点的变化基本相同。分析了叶片的变形过程、最大位移和最大当量应力。模拟鸟撞击风扇叶片数值仿真验证并补充了模拟鸟撞击风扇叶片试验结果。

Foreign Object Damage to Fan Rotor Blades of Aeroengine Part II: Numerical Simulation of Bird Impact

Bird impact is one of the most dangerous threats to flight safety. The consequences of bird impact can be severe and, therefore, the aircraft components have to be certified for a proven level of bird impact resistance before being put into service. The fan rotor blades of aeroengine are the components being easily impacted by birds. It is necessary to ensure that the fan rotor blades should have adequate resistance against the bird impact, to reduce the flying accidents caused by bird impacts. Using the contacting-impacting algorithm, the numerical simulation is carried out to simulate bird impact. A three-blade computational model is set up for the fan rotor blade having shrouds. The transient response curves of the points corresponding to measured points in experiments, displacements and equivalent stresses on the blades are obtained during the simulation. From the comparison of the transient response curves obtained from numerical simulation with that obtained from experiments, it can be found that the variations in measured points and the corresponding points of simulation are basically the same. The deforming process, the maximum displacements and the maximum equivalent stresses on blades are analyzed. The numerical simulation verifies and complements the experiment results.