| 硬质合金电火花加工工艺实验研究 |
| |
| 引用本文： | 廖文敏. 硬质合金电火花加工工艺实验研究[J]. 华北航天工业学院学报, 2011, 0(6): 18-20 |
| |
| 作者姓名： | 廖文敏 |
| |
| 作者单位： | [1]河北联合大学,河北唐山063009 [2]北华航天工业学院教务处,河北廊坊065000 |
| |
| 摘 要： | 针对硬质合金模具的加工表面精度要求,进行了高速钢与硬质合金两种材料的电火花加工工艺对照实验。为获得较低的表面粗糙度,选取了较小的电加工参数。实验结果表明,在该实验条件下,电火花加工的表面粗糙度不再满足常规条件下的经验公式,而与工件材料的再凝结特征、成分及电蚀产物的排出条件有关。
|
| 关 键 词： | 电火花加工 硬质合金 模具 |
Research of EDM Technology on Coated Carbide |
| |
| LIAO Wen-min. Research of EDM Technology on Coated Carbide[J]. Journal of North China Institute of Astronautic Engineering, 2011, 0(6): 18-20 |
| |
| Authors: | LIAO Wen-min |
| |
| Affiliation: | LIAO Wen-min,(1.Hebei United University,Tangshan 063009,China;2.Office of Educational Administration,North China Institute of Aerospace Engineering,Langfang 065000,China) |
| |
| Abstract: | To meet the requirements of surface precision of cemented carbide mould,experiments of electrical discharge machining were carried out.To obtain lower roughness surface,the smaller parameters were chosen.The results indicate that the surface roughness is mainly related to re-concreting character,components of material and ejection condition of etched waste instead of conventional factors. |
| |
| Keywords: | EDM cemented carbide mould |
| 本文献已被 维普 等数据库收录！ |
|
