| 单向带/平纹布混杂铺层层合板极限强度研究 |
| |
| 引用本文： | 彭超义,肖加余,曾竟成,江大志.单向带/平纹布混杂铺层层合板极限强度研究[J].航空动力学报,2008,23(3):557-562. |
| |
| 作者姓名： | 彭超义 肖加余 曾竟成 江大志 |
| |
| 作者单位： | 国防科学技术大学 航天与材料工程学院, 长沙 410073 |
| |
| 基金项目： | 国家863高技术项目(2004AA724052) |
| |
| 摘 要： | 单向带/平纹布混杂铺层方式常用于复杂复合材料结构的制备,对其极限强度进行研究具有重要的工程应用价值.把三维有限元方法和优化设计思想结合起来,建立了一种复合材料极限强度分析方法,该方法可基于通用有限元分析软件ANSYS实现.为验证该方法的有效性,实验制备了单向带/平纹布混杂铺层层合板进行了拉伸和压缩实验.结果表明该方法用于混杂铺层层合板极限强度预测,最大偏差在15%以内,满足工程应用要求.
|
| 关 键 词： | 航空、航天推进系统 平纹布 单向带 复合材料 混杂铺层 极限强度 有限元 |
| 文章编号： | 1000-8055(2008)03-0557-06 |
| 收稿时间： | 2007/3/27 0:00:00 |
| 修稿时间： | 2007年3月27日 |
Investigation on the ultimate strength of unidirectional tapes and plain cloth hybrid laminates |
| |
| PENG Chao-yi,XIAO Jia-yu,ZENG Jing-cheng and JIANG Da-zhi.Investigation on the ultimate strength of unidirectional tapes and plain cloth hybrid laminates[J].Journal of Aerospace Power,2008,23(3):557-562. |
| |
| Authors: | PENG Chao-yi XIAO Jia-yu ZENG Jing-cheng and JIANG Da-zhi |
| |
| Institution: | College of Aerospace and Material Engineering, National University of Defense Technology, Changsha 410073, China |
| |
| Abstract: | Unidirectional-tapes/plain-cloth hybrid laminates are widely applied in fabricating complex composite structures.A theoretical analysis approach was established in the present paper to predict the ultimate strength of the tapes/plain-cloth reinforced composites based on three dimensional finite element analysis and optimum design method.The tension and compression experiments on the tapes/plain-cloth laminates were done to verify the effectiveness of the theoretical method put forward in this paper.The deviation of the ultimate strength between the theoretically predicted results and the experimental results are within 15%. |
| |
| Keywords: | aerospace propulsion system plain cloth unidirectional tape composite hybrid lamination ultimate strength finite element |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
| 点击此处可从《航空动力学报》下载免费的PDF全文 |
