首页 | 本学科首页   官方微博 | 高级检索  
     检索      

低温非接触式端面密封参数优化与试验验证
引用本文:陈杰,李建克,王少鹏.低温非接触式端面密封参数优化与试验验证[J].火箭推进,2013,39(4):56-61.
作者姓名:陈杰  李建克  王少鹏
作者单位:西安航天动力研究所,陕西西安,710100
摘    要:针对液氧/煤油发动机使用的接触式端面密封存在端面温升大、重复使用性能不理想等问题,首先采用无限长平面平行槽的惠普尔理论构建非接触式端面密封计算模型,然后仿真计算密封结构参数对气膜刚度以及泄漏量等密封性能的影响,最后以最大气膜刚度为优化目标,对非接触端面密封结构参数进行优化设计.低温运转试验验证了优化结果的正确性和非接触式端面密封具有良好的重复使用性.

关 键 词:非接触式端面密封  气膜刚度  参数优化  重复使用

Parameter optimization and experimental verification of non-contacting end-face seals in cryogenic condition
CHEN Jie , LI Jian-ke , WANG Shao-peng.Parameter optimization and experimental verification of non-contacting end-face seals in cryogenic condition[J].Journal of Rocket Propulsion,2013,39(4):56-61.
Authors:CHEN Jie  LI Jian-ke  WANG Shao-peng
Institution:(Xi' an Aerospace Propulsion Institute, Xi' an 710100, China)
Abstract:Aiming at the shortcomings of the traditional end-face seal in the LOX/kerosene rocket engine, such as high temperature rise caused by large friction and lack of reusability, the model of non-contacting end-face seal was established on the basis of infinitely long plane parallel groove theo- ry named as Whipple theory, the effects of the seal structure parameters on sealing performance in- cluding air film stiffness and leakage were simulated, and the structural parameters of non-contacting end-face seal were optimized to obtain the best film stiffness. The correctness of optimal results and better reusability of non-contacting end-face seal were proved through test in cryogenic condition.
Keywords:non-contacting end-face seal  air film stiffness  parameter optimization  reusability
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号