| TC4钛合金线性摩擦焊接头的冲击韧性及断口特征 |
| |
| 引用本文： | 马铁军,张学军,杨思乾,张勇,张云霞. TC4钛合金线性摩擦焊接头的冲击韧性及断口特征[J]. 航空材料学报, 2007, 27(6): 40-44 |
| |
| 作者姓名： | 马铁军 张学军 杨思乾 张勇 张云霞 |
| |
| 作者单位： | 西北工业大学,材料学院,西安,710072;北京航空材料研究院,北京,100095 |
| |
| 摘 要： | 在自制的XMH-160型线性摩擦焊机上利用先期试验优化的规范参数进行TC4线性摩擦焊接试验.对焊后试件进行冲击试验研究,冲击试件基本沿母材断裂.观察冲击试件的宏观和微观断口,并分析接头的金相组织.结果表明,焊缝超细晶组织所具有的高断裂应力是焊接接头冲击韧性值高于母材的主要原因.
|
| 关 键 词： | TC4钛合金 线性摩擦焊 冲击韧性 断口 |
| 文章编号： | 1005-5053(2007)06-0040-05 |
| 修稿时间： | 2006-12-14 |
Impact Toughness and Fracture Characteristics of Linear Friction Welded TC4 Joint |
| |
| MA Tie-jun,ZHANG Xue-jun,YANG Si-qian,ZHANG Yong,ZHANG Yun-xia. Impact Toughness and Fracture Characteristics of Linear Friction Welded TC4 Joint[J]. Journal of Aeronautical Materials, 2007, 27(6): 40-44 |
| |
| Authors: | MA Tie-jun ZHANG Xue-jun YANG Si-qian ZHANG Yong ZHANG Yun-xia |
| |
| Abstract: | Based on the optimum parameters obtained from prevenient experiments,the linear friction welding(LFW) experiment of TC4 titanium alloy was carried out with homemade XMH-160 LFW machine.It was found that all the impact test specimens cracked along the parent metal of TC4 alloy after impact test.The macroscopic and microscopic characteristics of impact fractures were observed,and the structure features of the joints were analyzed.The results show that the superfine structure of weld contributes to the higher notched bar impact strength of joint than that of the parent metal. |
| |
| Keywords: | TC4 titanium alloy linear friction welding impact toughness fracture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
