| 裁剪曲面的三轴铣削加工刀具轨迹的干涉处理 |
| |
| 引用本文： | 廖文和 刘壮. 裁剪曲面的三轴铣削加工刀具轨迹的干涉处理[J]. 南京航空航天大学学报, 1996, 28(6): 818-824 |
| |
| 作者姓名： | 廖文和 刘壮 |
| |
| 作者单位： | 南京航空航天大学CAD/CAM工程研究中心!南京210016 |
| |
| 基金项目： | 国家教委博士点基金，江苏省青年科技基金资助项目 |
| |
| 摘 要： | 在分析国内外三坐标数控加工刀具轨迹干涉检查和消除算法的基础上,提出了一种适合于球头刀、平底刀和圆角刀的刀具轨迹干涉检查和消除的算法,该算法将刀具看成解析曲面,裁剪曲面由三角片逼近表示,将刀具轨迹干涉检查与消除的问题转化为刀具曲面与三角片的相关性测试.算法计算简单,并在超人CAD/CAM集成系统中得以实现.
|
| 关 键 词： | 数控切削 几何造型 干涉处理 裁剪曲面 三角化 刀具轨迹 |
Interference Avoidance in 3-Axis NC Tool Path Generation of Trimmed Surface Milling |
| |
| Liao Wenhe Liu Zhuang Zhou Rurong. Interference Avoidance in 3-Axis NC Tool Path Generation of Trimmed Surface Milling[J]. Journal of Nanjing University of Aeronautics & Astronautics, 1996, 28(6): 818-824 |
| |
| Authors: | Liao Wenhe Liu Zhuang Zhou Rurong |
| |
| Abstract: | Based on the analysis of many algorithms about the interference avoidance of NCtool path generation, the paper presents an algorithm of interference avoidance for machiningwith ball end, flat and fillet tool. Here the tool surface is represented by the analytical surface,the trimmed surface is approximated with the triangular patches, and the problem of interfer-ence avoidance is solved by transforming them to the test of relations between tool surface andtriangular patches. The algorithm is simple and effective and realized in the super Man CAD/CAM system. |
| |
| Keywords: | numerical control cutting geometry modelling interference trimmed surface triangulation tool path |
| 本文献已被 CNKI 维普 等数据库收录！ |
