某型制导雷达部分元器件失效模式的分析

对某型号制导雷达部分元器件进行了失效分析，找出了导致元器件失效的原因，指出设计是提高可靠性的关键，并根据有关元器件情况对生产方与使用方提出了建议。着重讨论了设计师应注意的问题和应该遵循的设计原则。针对失效情况，提出了一些具体的设计构想。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

飞行控制器的多学科综合环境研究

多学科分析与优化已成为近年来飞行器设计的重要研究方法。本文介绍了一个以飞行控制器设计与分析为目的、基于多学科综合的一体化仿真软件包,说明了它的组成、特点及其主要设计问题,并以某飞行控制器设计为例阐明其应用。     

燃烧火焰温度分布重建结果误差分析

分析了采用辐射型CT算法的燃烧火焰温度发布重建结果误差产生的原因,给出了解决方法。     

三元共掺杂对YSZ热障涂层热物理性能的影响

采用NiO、Er_2O_3、Yb_2O_3、Y-2O_3、ZrO_2粉末为原料,用高温固相合成法制备复合陶瓷材料,研究该复合陶瓷材料的比热、热扩散系数、热导率等热物理性能,并与传统8YSZ热障涂层材料进行对比。利用XRD测定所制备的陶瓷样块的晶体结构和物相组成,分析该陶瓷试样的物相组成及高温相稳定性。结果表明:NiO、Er_2O_3、Yb_2O_3共掺YSZ后,室温至1500℃范围内的热扩散系数为0.36～0.56 mm^2/s,与8YSZ相比,降低了约20%;室温至1500℃的热导率为1.45～1.55 W/(m·K),比8YSZ降低了18%;2EYNYSZ陶瓷材料具有单一的相结构,经1500℃热处理100 h之内不发生相变。     

叉流管－管型换热器二维温度场的数值分析

建立并导出叉流管－管型换热器传热过程的二维数学模型及相应的差分格式,对比实验数据和性能计算结果,表明数值方法是有效可行的。据此编制的计算机程序已成功地用于组合发动机空气预冷换热器工作过程的预测。     

电子设备可靠性预计参数综合分析方法研究

如何调整元器件的参数以满足可靠性要求并达到最佳的效费比?传统的方法是绘制故障率随单个预计参数变化的曲线,然后根据变化的趋势分别进行调整,但该方法很难直观地反映出多参数对故障率的综合影响,为了达到优化的目的,设计人员需要根据经验反复地调整各类参数。为此,本文结合电子产品可靠性预计软件,给出了直观分析各参数对电子设备可靠性预计结果综合影响的方法。     

Accurate approximation of in-ecliptic trajectories for E-sail with constant pitch angle

Propellantless continuous-thrust propulsion systems, such as electric solar wind sails, may be successfully used for new space missions, especially those requiring high-energy orbit transfers. When the mass-to-thrust ratio is sufficiently large, the spacecraft trajectory is characterized by long flight times with a number of revolutions around the Sun. The corresponding mission analysis, especially when addressed within an optimal context, requires a significant amount of simulation effort. Analytical trajectories are therefore useful aids in a preliminary phase of mission design, even though exact solution are very difficult to obtain. The aim of this paper is to present an accurate, analytical, approximation of the spacecraft trajectory generated by an electric solar wind sail with a constant pitch angle, using the latest mathematical model of the thrust vector. Assuming a heliocentric circular parking orbit and a two-dimensional scenario, the simulation results show that the proposed equations are able to accurately describe the actual spacecraft trajectory for a long time interval when the propulsive acceleration magnitude is sufficiently small.     

应力极值分布、强度威布尔分布的可靠性

本文运用应力—强度干涉理论,推导了应力为Ⅰ型极小值分布,强度为威布尔分布的可靠度计算公式,并对冗长的计算公式进行简化,在简化公式的基础上,运用一定的数学技巧,改变积分公式中的积分变量和上下限。将被积函数化成在某一区域内的可积函数。采用de Boor编制的一种严谨的自适应Romberg外推格式的FORTRAN程序进行数值积分。对应予不同的组合参数,给出应力服从Ⅰ型极小值分布,强度服从威布尔分布的可靠度数值。本文最后讨论了服从这两种分布的组合参数的变化对可算度数值变化的影响。     

利用气动减速的国外深空探测器热控设计特点分析

气动减速技术能在耗费较少燃料的情况下,使探测器顺利进入预定环绕轨道.面向气动减速技术的深空探测器迎风面需要承受较高的气动热负荷与气动力,使得迎风面热控材料的耐热与耐冲击能力成为探测器设计的关键.文章对国外相关应用实例进行了调研和综述,并在此基础上总结了此类深空探测器热控系统的设计特点,可为气动减速技术在我国深空探测任务...