Semi-supervised gear fault diagnosis using raw vibration signal based on deep learning

In aerospace industry, gears are the most common parts of a mechanical transmission system. Gear pitting faults could cause the transmission system to crash and give rise to safety disaster. It is always a challenging problem to diagnose the gear pitting condition directly through the raw signal of vibration. In this paper, a novel method named augmented deep sparse autoencoder (ADSAE) is proposed. The method can be used to diagnose the gear pitting fault with relatively few raw vibration signal data. This method is mainly based on the theory of pitting fault diagnosis and creatively combines with both data augmentation ideology and the deep sparse autoencoder algorithm for the fault diagnosis of gear wear. The effectiveness of the proposed method is validated by experiments of six types of gear pitting conditions. The results show that the ADSAE method can effectively increase the network generalization ability and robustness with very high accuracy. This method can effectively diagnose different gear pitting conditions and show the obvious trend according to the severity of gear wear faults. The results obtained by the ADSAE method proposed in this paper are compared with those obtained by other common deep learning methods. This paper provides an important insight into the field of gear fault diagnosis based on deep learning and has a potential practical application value.     

Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

高速低压差分信号（LVDS）器件应用设计方法研究

随着高速LVDS器件得到广泛应用，在高速信号使用LVDS传输时，信号传输线路问题、信号传输波形的最佳化成为非常重要的课题之一。由于印制电路板的布局布线直接影响信号传输质量，因此利用仿真对印制板分析成为设计上不可缺少的手段。有鉴于此，文章深入探讨了高速电路的设计，总结出设计技巧。     

统一S波段测控信道调制指数设计方程

考虑了测距音提取滤波器以及返回噪声对统一Ｓ波段卫星测控信道的影响，采用图解和数学分析两种方法详细分析了已调载波的功率效率。在此基础上，分别推导出在有、无测距音提取滤波器两种情况下，调制指数的设计方程     

高速低压差分信号(LVDS)器件应用设计方法研究

随着高速LVDS器件得到广泛应用,在高速信号使用LVDS传输时,信号传输线路问题、信号传输波形的最佳化成为非常重要的课题之一。由于印制电路板的布局布线直接影响信号传输质量,因此利用仿真对印制板分析成为设计上不可缺少的手段。有鉴于此,文章深入探讨了高速电路的设计,总结出设计技巧。     

逆合成孔径雷达信号处理方法研究进展

在简要评述国内外现有的逆合成孔径雷达（ISAR）信号处理的运动补偿和成象方法之后，介绍了南京航空航天大学ISAR课题组近年来在ISAR信号处理方法研究中取得的主要进展，包括基于多散射点定位观点的雷达成象观测模型，基于最大似然原理的同时运动补偿和成象方法，基于最大似然原理的多目标成象方法和基于时频分析的多目标成象方法，以及超分辩成象方法，文末指出了在ISAR信号处理方面有待进一步研究的问题。     

基于信号采样的干扰信号产生技术

目前电子对抗系统广泛使用的数字储频技术主要是通过采样、存储和复制产生干扰信号.阐述了基于采样技术的信号重构及其基本原理,重点介绍分析了在此基础上利用信号处理技术,合成产生干扰信号的原理和方法.     

SPACEBUS3000卫星平台及其测控系统

介绍了法国宇航公司ＡＥＲＯＳＰＡＴＩＡＬＥ研制的通信卫星平台ＳＰＡＣＥＢＵＳ３０００的主要电子系统结构和功能，着重介绍了它的测控系统部分，包括数管子系统和射频子系统的详细结构和功能划分，以及它们的设计方案。     

微型FM/FM副载波解调器的设计与实现

介绍一种应用于FM/FM遥测系统的微型副载波解调器,相时于传统副载波解调器单独使用硬件进行解调处理的模式,系统在硬件上直接对多路副载波信号进行高速采样,然后将数据通过USB2．0总线实时上传到计算机,利用计算机强大的数字运算能力对副载波信号进行解调。这种方式极大地减小了硬件系统的尺寸和成本,并且便于实现对FM/FM遥测信号的存储和进一步分析处理。     

低特征信号绝热层用硅氧烷树脂研究

简述了用于固体火箭发动机低特征信号绝热层研制的发展现状。对多种硅氧烷树脂（ＲＴＶ）进行了筛选和信号透过率，热失重，力学及粘接笥能试验。试验结果表明，与使用ＥＰＤＭ绝热层材料相比，使用ＲＴＶ绝热层材料，火箭发动机燃烧室羽流具有较高的信号透过率；ＲＴＶ还具有较好的热性、力学及粘接性能，适于用作低特征信号绝热层的基体材料。