Scientific Planning and Commanding of the Rosetta Payload

ESA’s Rosetta mission was launched in March 2004 and is on its way to comet 67P/Churyumov-Gerasimenko, where it is scheduled to arrive in summer 2014. It comprises a payload of 12 scientific instruments and a Lander. All instruments are provided by Principal Investigators, which are responsible for their operations. As for most ESA science missions, the ground segment of the mission consists of a Mission Operations Centre (MOC) and a Science Operations Centre (SOC). While the MOC is responsible for all spacecraft-related aspects and the final uplink of all command timelines to the spacecraft, the scientific operations of the instruments and the collection of the data and ingestion into the Planetary Science Archive are coordinated by the SOC. This paper focuses on the tasks of the SOC and in particular on the methodology and constraints to convert the scientific goals of the Rosetta mission to operational timelines.     

一种新的六端口测量系统自校准方法

提出了一种新的六端口自校准方法.本方法从六端口相对功率理论出发,导出了六端口系统常数的自校准方程,给出了求解系统常数初值的方法,并利用梯度法对方程组求解,仿真结果表明用一个匹配负载、四个失配负载就可以解出系统常数.     

基于微波注入网络的电子战装备测试系统研究

通过对新型电子战装备的测试需求分析,提出一种基于微波注入网络的电子战装备测试系统.介绍了该测试系统的功能及工作原理;设计了基于微波注入网络的电子战装备测试系统的结构,并对各模块的功能进行了简单描述;最后对微波注入网络控制精度的关键技术进行了研究.     

卫星微波遥感定标技术

在简要论述微波遥感定标技术工作特点的基础上，着重分析星载有源微波遥感定标技术基本原理和关键技术，比较了各种定标方法特点，提出了若干建议。     

A concept mission for the Stellar Population and Evolution with Cubesats (SPEC)

Binary or multiple stellar systems, constituting almost a third of the content of the Milky Way, represent a high priority astronomical target due to their repercussions on the stellar dynamical and evolutionary parameters. Moreover the spectral study of such class of stars allows to better constrain the evolutionary theories of the Galactic stellar populations. By resolving the members of stellar systems through photometric observations we are able to perform more detailed measurements to infer their mass. In this paper we investigate the feasibility of a cubesat based mission including an optical payload to directly optically discriminate the members of a selected sample of binary systems. The scientific targets, consisting 11?M class dwarf stars binary systems, have been extracted from the already studied Riaz catalogue. These subset has been selected considering the star distance, the members angular separation, and the distance from the Galactic plane (due to limit the background and foreground contamination). The satellite concept is based on a 6 unit Cubesat embedding some commercial off the shelf components and an ad hoc designed optical payload occupying almost 4 units. The optical configuration has been chosen in order to fit the angular resolution requirements, as derived from the target characteristics. Moreover, according to the optical analysis and the computed field of view some requirements on the attitude control system have been inferred and fulfilled by the component selection. The paper is organized as in the following: a brief scientific introduction is made; consequently the project is described with particular attention to the optical design and the standard sub-systems; finally the conclusions are drawn and the future perspectives are investigated.     

基于干扰观测器的天基观测航天器姿态控制设计

与地基空间目标监视系统相比,天基观测系统具有监视范围广,不受国界限制,观测精度高等优点,是未来空间目标观测技术的重要发展方向。但天基观测航天器工作时,相机转台的运动,太阳能帆板挠性部件的弹性振动与航天器的姿态运动相互影响,构成强耦合的非线性系统,传统的控制方案无法实现对这类天基观测航天器的高精度姿态控制。文章针对某一空间观测航天器的任务要求,设计了基于干扰观测器的前馈补偿航天器姿态控制系统,仿真实验结果表明:姿态角控制精度小于 0.06°,姿态角速度精度小于 0.03(°)/s,达到了精度要求。     

超细金属粉微波电磁性能的研究

通过对两类超细铁粉的试验研究和理论分析，对其微波吸收性能进行了探索，指出超细铁粉存在自由电子吸波与磁损耗两种机制。研究结果还表明：超细铁粉的形貌、微观结构、粒径及其分布与超细铁粉在粘结剂中的分散状态对其微波电磁性能产生一定的影响。     

镀金属碳纤维吸波涂层添加剂的初探

吸波涂层采用导电纤维作为添加剂,主要吸波机制是以导电纤维作为谐振电偶极子,与具有损耗性能的介质材料基体相配合,将入射电磁波的能量大量谐振消耗在基体里,从而达到衰减的目的。导电纤维可以采用金属丝、不锈钢丝,镀铝涤纶纤维、镀银尼龙纤维以及镀金属碳纤维等本文采用镀金属碳纤维(MCF)作为主要研究对象。     

低RCS飞行器外形设计实践

 在鸭式布局的基础上 ,对飞行器各部件及部件间的连接方式进行了外形隐身设计。对初步形成的鸭翼 -翼身融合体改变机身头部形状和立尾配置等进行 RCS优化。给出了飞行器各种状态下的 RCS平均值和迎头± 45°区内的 RCS值。测试结果表明 ,尖头机身、 30°双立尾 (立尾与垂直平面成± 30°角 )的鸭翼 -翼身融合体的 RCS值最小。对 RCS优化后的外形 ,风洞测力试验表明其气动性能也较好 (最大升阻比达到 8,失速迎角超过 2 6°)     

高功率微波极化方式与入射方向对微带线耦合特性影响分析

针对高功率微波（HPM）耦合效应分析需求,采用时域多分辨分析法（MRTD）模型,给出了微带线端口电压和电流方程,验证了模型的适用性。基于MRTD,仿真分析了HPM作为入射波时其极化方式、入射方向对微带线电磁耦合特性的影响。结果显示：垂直线极化波和平行线极化波耦合系数峰值出现在不同的频率,且峰值相差约15 dB,采用圆极化波时耦合系数最大;入射方向变化时,耦合系数以水平入射最小,垂直入射时最大,高频段微带线边缘有绕射现象产生。该分析采用了分析计算电大尺寸HPM耦合效应的MRTD数学模型,提高了HPM与复杂结构的耦合计算效率。