航天器的防污染技术

简单介绍了航天器污染的概念,污染对航天器的损害,航天器污染研究的重要性,以及国内外航天器防污染研究概况。着重介绍真空热试验中的污染控制方法。引入航天器自污染的概念,介绍消除航天器自污染的有效办法是真空烘烤。     

A first step towards proton flux forecasting

We present a preliminary version of a potential tool for real time proton flux prediction which provides proton flux profiles and cumulative fluence profiles at 0.5 and 2 MeV of solar energetic particle events, from their onset up to the arrival of the interplanetary shock at the spacecraft position (located at 1 or 0.4 AU). Based on the proton transportation model by Lario et al. [Lario, D., Sanahuja, B., Heras, A.M. Energetic particle events: efficiency of interplanetary shocks as 50 keV E < 100 MeV proton accelerators. Astrophys. J. 509, 415–434, 1998] and the magnetohydrodynamic shock propagation model of Wu et al. [Wu, S.T., Dryer, M., Han, S.M. Non-planar MHD model for solar flare-generated disturbances in the Heliospheric equatorial plane. Sol. Phys. 84, 395–418, 1983], we have generated a database containing “synthetic” profiles of the proton fluxes and cumulative fluences of 384 solar energetic particle events. We are currently validating the applicability of this code for space weather forecasting by comparing the resulting “synthetic” flux profiles with those of several real events.     

顺序函数法求解二维非稳态热传导逆问题

基于有限控制体积法对二维非稳态热传导问题的数值模拟，导出了处理二维非稳态热传导逆问题的顺序函数法，并用该方法来对一典型的圆环域边界条件反演问题进行了反演计算，结果表明，顺序函数法是求解二维非稳态热传导逆问题的有效方法，当测量噪声比较小时，顺序函数法能得出较高精度的反演结果；当测量噪声增大时，反演结果仍能较好地再现出精确解在空间和时间方向上的变化趋势，具有一定精度。     

空间任意形状凸面的轨道空间外热流计算方法

采用蒙特卡罗（ＭｏｎｔｅＣａｒｌｏ）方法，进行了平板、半球面、抛物面的地球反照角系数和地球红外角系数计算，通过与文献数据的比较，证明了由此方法所编程序的可靠性和实用性。利用这种方法，可以计算空间任意形状凸表面的轨道空间外热流。     

切向结构永磁同步电机中磁钢厚度对性能的影响

提出了切向结构永磁同步电机中磁钢厚度的约束条件;依据电机学理论并结合有限元计算方法,研究了气隙长度恒定时不同极对数下气隙磁密、每极磁通与磁钢厚度的关系,探讨了磁钢厚度对电机的过载能力、铁耗等性能的影响;在气隙长度发生变化时,为了保证漏磁大小不变,讨论了气隙与非导磁衬套厚度、磁钢厚度的关系。并指出:(1)气隙恒定时,随着磁钢厚度的增加,不同极对数时磁钢体积增大所提供的磁势对每极磁通的影响有所不同;铁耗和过载能力随磁钢厚度的增加而增大。(2)气隙增大时,为了保证气隙磁密和漏磁不变,必须增加非导磁衬套的厚度。(3)极对数增加时,减小磁钢厚度能提高电机的性价比。     

基于反电势形状函数法的无刷直流电动机直接转矩控制

采用两相导通模式时通过逆变器开关状态不能确定电压空间矢量,现有方案是通过实时测量3个相电压来解决这一问题,但系统变得复杂;此外现有方案在转矩观测中包含的微分项会降低控制精度,增大计算量,影响系统实时性。针对这两点不足,提出反电势形状函数法,在软件中实现了相电压的实时计算,使转矩观测变得简洁,更易于工程实用。最后给出的仿真与实验结果证明了反电势形状函数法用于无刷直流电机直接转矩控制中的可行性与有效性。     

四相横向磁通永磁电机的三电平滞环电流控制

以新型四相横向磁通永磁电机为研究对象,利用MATLAB/Simulink软件平台以及Simpower System工具箱,对闭环控制系统进行了研究。在传统双闭环调速控制基础上,为滞环电流控制环引入零电平,将滞环分为上滞环和下滞环。综合考虑开关频率与电流THD确定合适的滞环环宽,并根据偏差电流值与滞环环宽比较值得到逆变器控制信号。通过仿真得到各种工况下的电机运行数据,说明该控制方法能够对四相横向磁通永磁电机进行有效控制。     

双流制窄轨电力机车用异步牵引电机设计

将牵引电机应用于双流制窄轨电力机车时,由于窄轨机车轨距小,所以牵引电机安装空间异常狭小,比一般牵引电机在安装空间、电机结构、电磁负荷等方面的要求更加苛刻。针对窄轨双流制电力机车的运用特点和特殊要求进行了分析,提出了牵引电机的设计要求和关键技术难点,并对关键技术难点给出了相应的分析和解决措施。对该牵引电机的制造过程及电机试验测试情况进行了论述。试验结果表明,该牵引电机达到了设计预期,完全能满足设计要求。     

Numerical analysis of hypersonic thermochemical non-equilibrium environment for an entry configuration in ionized flow

A theoretical methodology for thermochemical non-equilibrium flow combing with the HLLC (Harten-Lax-van Leer Contact) scheme was applied to study the hypersonic thermochemical non-equilibrium environment of an entry configuration in ionized flow. A two-temperature controlling model was utilized and the Gupta’s 11 species (N₂, O₂, NO, O, N, NO⁺, N₂⁺, O₂⁺, N⁺, O⁺, e^?) thermochemical non-equilibrium model was taken. Firstly, numerical calculations of hypersonic thermochemical non-equilibrium environments for different aerodynamic shapes were carried out to verify the reliability of the method above. Then, the method was used to research the effects of ionization and wall catalysis on the hypersonic thermochemical non-equilibrium environment of the entry configuration in ionized flow. The shock stand-off distance can be reduced by thermochemical reactions but doesn’t continue to decrease significantly when ionization occurs. The shock stand-off distance calculated by the 11 species model is 4.2% smaller than that calculated by the 5 species (N₂, O₂, NO, O, N) thermochemical non-equilibrium model without considering ionization. Ionization reduces wall heat flux but increases wall pressure a little. The effect of ionization on aerothermal loads is greater than that of aerodynamic loads. The thermochemical reactions of electrons and ions catalyzed at the wall increase wall heat flux significantly but make a small change in wall pressure. The maximum wall heat flux obtained by only considering the electrons and ions catalyzed at the partially catalytic wall condition is 11.8% less than that calculated at the super-catalytic wall condition.     

某型航空发动机滑油供油系统压力和流量仿真

利用英国商用流体系统仿真软件FLOWMASTER对在中间状态下某型发动机滑油供油系统的压力和流量进行了仿真,总结分析了不同供油温度对该系统流阻特性的影响趋势,根据仿真结果给出了该系统结构的改进建议。