Implementation of tactical maneuvers with maneuver libraries

This study creates and combines the general maneuver libraries for fixed-wing aircraft to implement tactical maneuvers. First, the generalized maneuver libraries are established by analyzing the characteristics of tactical maneuvers required in battlefields. The 7th order polynomial is applied to both the creation of the maneuver libraries and the generation of the trajectories or flight paths for modal inputs. To track the desired trajectory, we design the Attitude Command Attitude Hold (ACAH) system and the Rate Command Rate Hold (RCRH) system using Model Following Controller (MFC). Moreover, the Line-of-Sight (LOS) guidance law is designed. In particular, the CONDUIT® is employed to optimize the gains so that the control systems meet the aircraft Handling Qualities (HQ) criteria. Finally, flight simulations are performed for the longitudinal loop, immelmann-turn, and climb-slalom-descent maneuvers to verify that tactical aggressive maneuvers are realizable via the combination of maneuver libraries. This study can contribute to the development of flight techniques for aircraft tactical maneuvers and to the revision of air force operational manuals.     

Aiming at a 1-cm Orbit for Low Earth Orbiters: Reduced-Dynamic and Kinematic Precise Orbit Determination

The computation of high-accuracy orbits is a prerequisite for the success of Low Earth Orbiter (LEO) missions such as CHAMP, GRACE and GOCE. The mission objectives of these satellites cannot be reached without computing orbits with an accuracy at the few cm level. Such a level of accuracy might be achieved with the techniques of reduced-dynamic and kinematic precise orbit determination (POD) assuming continuous Satellite-to-Satellite Tracking (SST) by the Global Positioning System (GPS). Both techniques have reached a high level of maturity and have been successfully applied to missions in the past, for example to TOPEX/POSEIDON (T/P), leading to (sub-)decimeter orbit accuracy. New LEO gravity missions are (to be) equipped with advanced GPS receivers promising to provide very high quality SST observations thereby opening the possibility for computing cm-level accuracy orbits. The computation of orbits at this accuracy level does not only require high-quality GPS receivers, but also advanced and demanding observation preprocessing and correction algorithms. Moreover, sophisticated parameter estimation schemes need to be adapted and extended to allow the computation of such orbits. Finally, reliable methods need to be employed for assessing the orbit quality and providing feedback to the different processing steps in the orbit computation process. This revised version was published online in August 2006 with corrections to the Cover Date.     

测定钡含量的快速方法

本文研究了测定钡盐中钡含量的快速方法。该法是基于被测的钡离子与过量的铬酸钠标准溶液反应形成铬酸钡沉淀，剩余的铬酸根离子以溴甲酚绿-甲基红为混合指示剂，用盐酸标准溶液滴定，而间接测定钡的量。该法操作简便、快速，可应用于多种钡盐中钡的测定。     

磁粉检验标准环形试块的机理分析

为了分析控制磁粉检验系统综合性能的标准环形试块的机理，首先建立一个计算漏磁场的简化数学模型，然后解标量磁位的=维拉普拉斯方程，求出被磁化的环形试块上圆孔产生的漏磁场，计算环形试块表面的磁粉受力，分析其特点并得出相应的结论。     

捷联惯导系统的圆锥误差补偿算法研究

非互易向量的确定与补偿是影响高动态、恶劣振动环境下捷联惯性导航系统姿态矩阵计算的重要问题。为了补偿由此引起的圆锥误差，本文对一些传统算法进行了分析和研究。由于以往各种算法一般都需要输入信息为角度信息，但对于高动态、恶劣振动环境，角速度信息更有工程意义，所以针对输入信息为角速度的情形，提出了一类新的姿态算法，通过对比传统的算法，新算法在同样计算量、存储量的情况下有较优的性能，算法的精度较传统的算法高。另外，对新的姿态算法进行了误差分析．为其参数选择提供了选择标准，有工程实用价值。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

FY-2气象卫星在轨管理工程测控关键技术(上)

介绍了风云二号(FY—2)地球静止轨道自旋气象卫星工程测控的关键技术。分析了位置保持、姿态确定、星蚀和日凌的原理，给出了位置保持、姿态控制策略和地影、月影、日凌预报算法。并提出了一种检验定姿结果正确性的方法，提供了相应的工程计算参数。这些策略都已成功地用于FY—2卫星的在轨管理工程测控。     

GPS/速率陀螺组合Kalman滤波姿态确定算法研究

建立了GPS／速率陀螺组合姿态估计系统的模型，研究比较了三种典型的Kalman滤波姿态确定算法：状态扩充法、量测量求差法和时变噪声估计跟踪自适应滤波算法。给出了某航天器采用GPS／速率陀螺组合姿态确定的仿真计算结果，并对结果进行了分析。结果表明，与传统Kalman滤波算法比较，时变噪声跟踪自适应滤波算法和量测量求差滤波算法能较好地消除GPS测量中相关时变噪声的影响，提高姿态确定的精度；而且时变噪声跟踪自适应滤波算法能很好地消除由于噪声统计性能的不确定性对Kalman滤波的影响，提高姿态确定系统的性能。     

推力矢量控制系统的参考模型鲁棒控制研究

本文针对典型的推力矢量电波位置伺服系统中存在的参数摄动和加性扰动，采用模型参考鲁棒控制方法（ＭＲＲＣ），使系统对扰动不敏感。ＭＲＲＣ方法仅需要已知系统的输入输出信息，而不必采用全状态反馈，同时比模型参考自适应控制（ＭＲＡＣ）算法简单。文中通过理论分析和必要的公式推导，证明了系统是渐进稳定的，并且仿真结果也验证了ＭＲＲＣ的有效理论分析和必要的公式推导，证明了系统是渐进稳定的，并且仿真结果也验证了ＭＲ     

导弹姿态控制伺服系统的变结构控制

为消除导弹姿态控制伺服系统变结构控制中的抖振，在状态轨迹与滑动平面夹角变结构控制律的基础上，将原来的二阶系统扩展为n阶。所设计的控制律兼具连续控制律与非连续控制律的优点，动态品质优良。仿真结果验证了理论分析的有效性。