Far-UVC light as a new tool to reduce microbial burden during spacecraft assembly

This work aims to investigate far-UVC light at 222 nm as a new microbial reduction tool for planetary protection purposes which could potentially be integrated into the spacecraft assembly process. The major advantage of far-UVC (222 nm) compared to traditional germicidal UVC (254 nm) is the potential for application throughout the spacecraft assembly process in the presence of humans without adverse health effects due to the limited penetration of far-UVC light into biological materials. Testing the efficacy of 222-nm light at inactivating hardy bacterial cells and spores isolated from spacecraft and associated surfaces is a necessary step to evaluate this technology. We assessed survival of Bacillus pumilus SAFR-032 and Acinetobacter radioresistens 50v1 exposed to 222-nm light on proxy spacecraft surfaces simulated by drying the bacteria on aluminum coupons. The survival fraction of both bacteria followed a single stage decay function up to 60 mJ/cm², revealing similar susceptibility of both species to 222-nm light, which was independent of the exposure rate. Irradiation with far-UVC light at 222 nm is an effective method to decontaminate the proxy spacecraft materials tested in this study.     

POGO蓄压器变频降幅特性分析

论述纵向耦合振动（POGO）蓄压器的变频降幅特性，指出其主要影响因素是蓄压器容积及连接管路的液阻，根据输送管路的特定频率，选择适当的蓄压器容积，使其固有频率与特定管路的压力脉动频率相一致，可以获得预期的变频降幅效果。给出了蓄压器的变频降幅试验研究结果，可为POGO蓄压器的设计，研制，使得提供参考。     

模型的随机平衡降阶

本文提出了系统在白噪声激励下的一种开环降阶方法—随机平衡降阶法。在系统的随机平衡坐标中，输出性能指标可以表示成一组与系统随机可控／可观格莱姆相关的贡献值的和。根据这组贡献值的大小，可以决定在随机平衡坐标下降阶模型所要保留的状态分量，并从输出误差指标的最优角度出发，对输出矩阵作个修正。最后给出了一个数值仿真例子。     

THE RESEARCH OF INCREASING LIFT ANDREDUCING DRAG FOR WING-TIP SAILS

ＴＨＥＲＥＳＥＡＲＣＨＯＦＩＮＣＲＥＡＳＩＮＧＬＩＦＴＡＮＤＲＥＤＵＣＩＮＧＤＲＡＧＦＯＲＷＩＮＧ－ＴＩＰＳＡＩＬＳＣｈｅｎＭｉｎｇｙａｎ，ＱｉＭｅｎｇｂｕ（ＮａｎｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，...     

A time-frequency analysis of the thermal radiation background anomalies caused by large earthquakes: A case study of the Wenchuan 8.0 earthquake

Strong earthquakes have an impact on the regional thermal radiation background, which has been both observed and confirmed. This effect produces anomalies in the thermal radiation background (TRBA) and increases the difficulty of extracting a thermal radiation anomaly (TRA) that is associated with an earthquake occurring during the same time period. The extraction and identification of such anomalies has been ignored by previous studies. In this study, we investigate the time-frequency analysis (TFA) method, together with the wavelet filtering of the Daubechies method and the relative power spectrum analysis of the Fourier Welch method to extract and analyse the TRBA caused by the 2008 Wenchuan Ms 8.0 earthquake and the TRA of the 2013 Minxian-Zhangxian Ms 6.6 earthquake using data concerning the brightness temperature of a black body (TBB) from the Fengyun-2 series of geostationary meteorological satellites developed by China. The result showed that this method can effectively extract and analyse the TRBA caused by the Wenchuan earthquake and the TRA of the Minxian-Zhangxian earthquake form a complex background environment. Furthermore, we discussed the impact of the earthquake on the TRBA and segmented the process. The impact is mainly reflected by three aspects; the characteristic period of the TRBA changes, the TRBA occurs at the same time every year, which is identical to the time at which the earthquake anomaly occurred, and the impact process is in stages. We also summarized the correlation between the characteristic parameters of a TRA and the regional thermal radiation background, geography, and climatic factors.     

基于改进准则法的复合壳阻尼结构拓扑减振动力学优化

针对复合壳阻尼结构的拓扑减振优化问题，以约束阻尼层的有限单元为设计变量，采用体积比、模态频率和振型为优化约束条件，构建以多模态权重系数的结构模态损耗因子数值关系为优化目标函数的拓扑减振优化模型。为了拓展优化目标灵敏度具有不局限于某一变密度法插值模型的形式，推导了数值表达式的一般函数式。动力学优化中优化目标灵敏度正、负数集共存，使得非凸性的目标函数设计变量出现负值或优化函数寻优于局部极值点。为此，推导出复合壳阻尼结构的全域灵敏度改进优化准则法迭代格，以确保每次迭代域均为全域设计变量集。结合有限单元法编程实现了复合壳阻尼结构改进准则法，并对复合壳结构进行拓扑减振优化分析。结果表明：在敷设体积减为全覆盖的50%时，复合壳结构的模态损耗因子增减偏差为10%，具有提升减振的轻量化设计目的；各阶目标函数和拓扑构型所需的迭代次数少，中间密度区域较小，多阶优于单阶模态优化函数，易于获得全域寻优的有效减振。     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

地外人工光合成装置研制与试验

原位资源利用技术是地外生命保障体系构建、实现人类地外生存的有效途径,是载人深空探索的核心技术。基于微通道技术的人工光合成反应器,采用流动反应器设计,用于低微重力等特殊环境条件下模拟人工光合作用,实现CO２向O２和含碳燃料的转化。微通道芯片通过气液剪切作用力使气体反应产物快速脱离电极表面并随反应介质排出反应器,理论上可以克服微重力条件对反应过程的影响,尚需进行微重力试验进行验证。同时,微通道结构可以通过精确控制反应气液的压力、流速、流量比等反应条件,获得优化的反应条件。通过地面试验,验证了该反应器将CO２还原为O２和含碳化合物的功能可行性。以Au和Ir/C作为阴极和阳极材料,3V电压条件下,O２产率可达11.74mL/h。此外,基于人工光合成反应器搭建了集反应模块、控制模块、流路驱动模块以及检测模块等于一体的地外人工光合成装置,形成原位反应、介质供给、精确控制、在线收集和检测等功能一体化的系统,并实现CO２有效转换和O２供给。为后续技术成熟度更高的反应装置研制、高产物选择性的含碳化合物转化以及人工光合成反应装置在轨试验奠定了理论和实践基础。     

基于欠采样的零阶优化算法

非平衡学习吸引了许多研究者的关注。一般情况下,少数类是更值得关注的,并且其误分类代价要远高于多数类。由于非平衡数据分布的非均衡性,标准的分类算法将难以适用。为了解决非平衡数据分类问题,给出了基于欠采样的零阶优化算法。首先,为了降低数据非平衡分布的影响,针对不同非平衡比的数据集给出了不同的两种采样策略。然后,采用了一种引入间隔均值项的支持向量机(Support vector machine,SVM)优化模型进行分类,并使用带有方差减小的零阶随机梯度下降算法进行求解,提高了算法的精度。在非平衡数据上进行了对比实验,实验证明提出的方法有效提高了非平衡数据的分类效果。     

后掠翼三维鼓包串激波控制参数的影响

针对跨声速后掠翼,三维鼓包串作为一种有效的减阻方式具有结构简单、高效及鲁棒性好等优点.利用全局优化算法探索了鼓包设计参数空间的整体特性,并对鼓包长度、三维鼓包展向设计参数对鼓包减阻效果的影响进行了研究,发现鼓包顶点位置和高度对阻力系数最敏感,三维鼓包的展向设计参数则对阻力系数不敏感,而鼓包长度和鼓包相对展长越长越有利于减阻.在此基础上开展了小后掠角自然层流机翼加3种不同类型鼓包串的优化研究,通过优化结果发现,增加优化后的三维鼓包串,可将小后掠角自然层流机翼阻力发散马赫数向后推移,并且鼓包平均长度和控制区越大,效果越好.三维鼓包串具有良好的局部控制特性,可用于局部较强激波的抑制.三维鼓包串对常规后掠翼波阻具有良好的控制效果,同时能够抑制激波诱导的机翼后缘气流分离.