Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

一种基于多点测距信息的复合制导方法

分析探讨了一种用于提高弹道式导弹对目标命中精度的复合制导方案，提出了通过进行多点测距，利用状态转移矩阵方法，来估计导弹落点偏差和末修级起控点飞行状态参数，然后再按照需要的速度进行末修级导引控制的复合制导方案，并通过仿真计算分析论证了该方法的可行性。     

弹道靶红外辐射测量

为深入认识再入物理现象 ,在弹道靶上做了模型头部和近尾流红外辐射测量。发射器为 1 4.5mm口径的二级轻气炮 ,模型为1 0mm的球 ,材料为聚碳酸酯和铝 ,模型发射速度 4～6km/s,使用红外InSb探测器测量波长 3～ 5 .4μm的红外辐射 ,靶室压力 5 .32kPa。实验中使用光电法测量模型速度 ,两站阴影照相进行模型姿态监测和速度核实。实验结果表明 :球模型的红外辐射强度强烈依赖于模型材料和模型飞行速度。对不同材料模型头部和尾流部辐射强度的定性比较说明由于低温材料烧蚀产物的存在 ,极大地增强了头部和近尾流区的辐射强度 ,而且延长了尾流辐射长度     

二维通道内湍流边界层分离的实验研究

用激光多普勒技术测量了二维扩压器中不可压湍流边界层分离流动，得到了时均速度和雷诺剪应力分布。实验结果分析表明：以Ｃｏｌｅｓ速度律发展的Ｂａｒｄｉｎａ速度分布可以描述瞬时间歇分离点以前和瞬时间歇再附点以后的时均速度分布，但无法描述分离区的边界层速度型。Ｃｒｏｓｓ速度分布可描述分离区的边界层速度分布。Ｃｅｂｅｃｉ＆Ｓｍｉｔｈ涡粘性代数模型难以正确地描述分离边界层的雷诺剪应力。     

我国月面巡视探测器定位方法研究

月球自动巡视勘查技术中的月面巡视探测器的导航控制,需要研究月面巡视探测器的定位技术。文章通过对国外漫游车定位方法的研究,提出了我国月面巡视探测器在全局坐标系和局部坐标系中进行定位的方法。月面巡视探测器在全局坐标系中的定位可以采用星敏感器以及陆标辨识的方式;局部坐标系的定位可以采用惯性导航系统 里程计以及着陆器帮助下定位和视觉里程计的定位方法。这几种定位方式的组合应用,能够满足月面巡视探测器导航方面的定位要求。     

星载合成孔径雷达回波多普勒频率的计算

从星载合成孔径雷达（ＳＡＲ）与目标的相对运动关系出发，以ＳＡＲ发射信号的波长、卫星的轨道参数和目标的位置（地心经纬度）为已知条件，导出了计算目标回小以的多普勒频率的解析公式，这对于星载ＳＡＲ系统的性能 初步设计具有重要作用。     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

距离拖引干扰对几种脉冲雷达的干扰效果分析

借助于雷达信号的模糊函数，分析了距离拖引干扰对非脉压雷达、线性调频脉压雷达和二相编码脉压雷达的干扰效果，且进行了比较，得到了一些有用的结果。     

Efficacy of Doppler ultrasound [correction of utrasound] for screening symptoms of decompression sickness during simulated extravehicular activities

Doppler ultrasound is frequently used for monitoring circulating microbubbles during decompression to assess the symptoms of Decompression Sickness (DCS). This analysis was carried out to evaluate its effectiveness for screening symptoms of DCS during simulated extravehicular activities (EVA). The information from various hypobaric chamber studies carried out at the NASA Johnson Space Center, Houston, TX was used in this analysis (n = 516). The circulating microbubbles were detected in the precordial area in 42% (218/516), and symptoms were reported in 16% (81/516) of these exposures. The accuracy of Doppler-detectable bubbles (Spencer grades) on all symptoms of DCS was examined by calculating measures of sensitivity and specificity. The efficacy of Doppler as a screening device was examined by calculating their positive predictive value (PPV) and negative predictive value (NPV). The results of these analyses indicated that the sensitivity of Doppler decreased, and the PPV increased with higher Spencer grades. However, the likelihood of detecting true negative cases (NPV) was consistently higher with all bubble grades. Due to the high false-positive rate and low prior probabilities of the risk of DCS, Doppler was found to be more useful to identify those who did not develop DCS, than to detect positive cases of DCS in the simulated EVA exposures.     

基于四元数估计角速率的陀螺故障定位

当卫星速率积分陀螺的配置冗余度不满足一致性检验条件时，不能单纯利用硬件冗余实现陀螺的故障定位。鉴于角度和角速度敏感器的输出通过卫星运动学相关，本文利用姿态测量敏感器的输出来诊断陀螺故障。首先根据姿态测量敏感器的输出得到卫星姿态四元数，进而根据四元数动力学方程得到粗略的姿态角速度信息，并将此角速度作为输出信息用于对卫星动力学方程的滤波，从而得到较精确的角速度信息，为单冗余度陀螺组件的故障定位提供解析冗余信息。利用四元数方法可以避免出现奇点。仿真结果证明了该方法的有效性。