Aiming at a 1-cm Orbit for Low Earth Orbiters: Reduced-Dynamic and Kinematic Precise Orbit Determination

The computation of high-accuracy orbits is a prerequisite for the success of Low Earth Orbiter (LEO) missions such as CHAMP, GRACE and GOCE. The mission objectives of these satellites cannot be reached without computing orbits with an accuracy at the few cm level. Such a level of accuracy might be achieved with the techniques of reduced-dynamic and kinematic precise orbit determination (POD) assuming continuous Satellite-to-Satellite Tracking (SST) by the Global Positioning System (GPS). Both techniques have reached a high level of maturity and have been successfully applied to missions in the past, for example to TOPEX/POSEIDON (T/P), leading to (sub-)decimeter orbit accuracy. New LEO gravity missions are (to be) equipped with advanced GPS receivers promising to provide very high quality SST observations thereby opening the possibility for computing cm-level accuracy orbits. The computation of orbits at this accuracy level does not only require high-quality GPS receivers, but also advanced and demanding observation preprocessing and correction algorithms. Moreover, sophisticated parameter estimation schemes need to be adapted and extended to allow the computation of such orbits. Finally, reliable methods need to be employed for assessing the orbit quality and providing feedback to the different processing steps in the orbit computation process. This revised version was published online in August 2006 with corrections to the Cover Date.     

Pro／Engineer中的圆角特征处理

本文从设计原理的角度结合作者的使用经验，分析了Pro／E中圆角特征的作用、构造方法及注意事项，以利于该特征在众多菜单中理清思路并正确构造圆角特征。     

8mm辐射计特性参数测试及定标

文中简介了小口径天线毫米波辐射计定标系统的设计原理、结构、输出亮温的计算模型 ,研究了从液氮温度到室温范围内进行多点定标的方法 ,并对 8mm辐射计进行了特性参数测试及定标实验 ,得出了微波辐射计的定标方程和灵敏度、线性度、稳定度以及积分时间等指标。在该系统上按给定的程序进行定标 ,精度为 1 .0 6K。     

智能控制大功率氨压机制冷系统

本文将模糊控制、神经元控制等智能控制技术成功地应用于大型活塞式氨压机制冷系统，实现了恒转矩负载的变频调速节能。实际运行结果证明，该智能控制的大功率氨压机制冷系统工作稳定、控制精度高、节能效果显著，具有很好的经济效益及推广应用价值。     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

带滑移铰空间机械臂惯性空间轨迹的复合自适应跟踪控制

讨论了载体的位置与姿态均不受控制的漂浮基带滑移铰空间机械臂的控制问题。动力学分析表明，结合系统动量及动量矩守恒关系得到的运动Jacobi关系及系统动力学方程将是系统惯性参数的非线性函数，借助于增广变量法，我们得到了与惯性参数呈线性关系的系统广义Jacobi矩阵及系统控制方程，以此为基础，针对系统中存在未知惯性参数的情况，设计了一种末端抓手惯性空间期望轨迹跟踪的复合自适应控制方案，此控制方案的优点在于不需要测量空间机械臂载体的位置及移动的速度，加速度，仿真运算证实了方法的有效性。     

太阳风质子束流的演化

太阳神飞船观测表明，太阳风高速流中质子束分量相对于核分量的密度随日心距离增加而增加．提出解释这一观测现象的机理并给出二维数值模拟结果．由于阿尔芬波速随日心距离增加而减少，第二支左旋波将与更多的质子共振，把部分原来属于核分布的质子拉到束分布中来．用数值模拟方程方法求解回旋波共振导致的准线性扩散方程，数值结果与观测结果相符合．     

地磁急始年发生数周期特征的小波分析

采用小波分析方法分析了急始年发生数的时间序列的周期特征，并对急始发生数的特征与太阳黑子相对数的特征进行了简要的对照分析，分析结果表明，急始发生数的周期规律与太阳黑子相对数的周期规律是有差异的．还进行了太阳黑子相对数与急始数的相关性，太阳黑子相对数与急始磁暴的相关性研究，分析结果表明它们之间显著相关．还对急始数与急始磁暴致以及其他的一些参数之间的相关性进行了分析，最后对分析结果进行了讨论．     

反舰导弹变系数修正比例导引研究

针对超音速反舰导弹自导段控制的特点，对比分析了两种典型的非线性导引规律即反馈线性化（FLGL）导引律和逆向接近导引律的优缺点，提出了一种称为变系数修正比例导引的方法，通过对其全弹道仿真结果的分析，说明所提出的导引规律是正确的，具有良好的应用效果。     

涡轮螺桨飞机性能试飞换算方法研究

涡轮螺桨发动机的无因次性能参数是三个变量的函数，在详细地讨论了涡轮螺桨发动机性能方程中的第三个变量之后，本文叙述了涡轮螺桨飞机的性能试飞换算方法，包括无因次图解法及微分修正量法，最后，简要地讨论了上述两种方法的特点及其适用性。