Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

月食过程月表太阳辐照和温度变化模拟

月食对月球轨道探测器的温度有重要的影响,分析月食时月表的太阳辐照和温度,具有重要意义。文章给出了通用的月表温度模型和月食时月表太阳辐照模型,根据某次月食的天文参数,用太阳辐照模型可求出月表任一点在月食时的太阳直接辐照变化过程,代入温度模型可求出任一点的温度变化过程。此模型和方法可用于对任何一次月食的分析,并以2007年8月28日的月食为例,模拟了该次月食的表面太阳直接辐照和温度的变化过程。     

浮栅ROM器件的质子辐射效应实验研究

给出了浮栅ROM器件的质子辐射效应实验结果.认为浮栅ROM28C256和29C256的质子辐射效应不是单粒子效应,而是质子及其次级带电粒子产生的累积剂量造成的总剂量效应.器件出现错误有个质子注量阈值.对于29C256,高温加电退火容易消除质子产生的辐射损伤;对于28C256,高温加电退火不易消除质子产生的辐射损伤.动态监测和静态加电的器件都出现数据错误,且不能用编程器重新写入数据.然而不加电的器件在更高的质子注量辐照下未出现错误.对于应用浮栅ROM器件的航天器电子系统,冷备份是提高其可靠性的有效手段之一.     

Numerical investigation on flow nonuniformity-induced hysteresis in scramjet isolator

Numerical simulation and theoretical analysis were conducted to study the hysteresis inside scramjet isolator during the reciprocating process of back pressure variation. It is revealed that only a regular reflection is theoretically possible for two leading shocks when the inflow Mach number is greater than 2.0, and no hysteresis can occur in the transition between shock reflection types. Nevertheless, wall suction, gas injection, and background waves cause non-uniformity of the incoming flow and would make hysteresis possible. Besides the classical hysteresis in the transition between shock reflection, new kinds of hysteresis were found in both the deflection angle of separated boundary layer and the location of the shock train. Moreover, the occurrence of hysteresis in the deflection angle of the separated boundary layer is accompanied with the shock reflection hysteresis. In the case with background waves or gas injection, hysteresis in the starting position of leading shock was observed too. As back pressure decreases, the leading shock does not follow the same path as that as the back pressure increases, and it is anchored at the location where the background shock or the injection interacts with the leading shock. It is inferred that, if two strong adverse pressure gradient regions move towards and interact with each other, hysteresis will take place when they start to separate.     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

热控涂层电子辐照效应

研究防静电Kapton二次表面镜(ITO/Kapton/Al)、S781白漆两种典型热控涂层,在不同能量电子辐照后太阳吸收比退化情况,并利用X射线光电子能谱和扫描电子显微镜对样品表面的成分和形貌进行了分析。结果表明:相同电子注量下,不同能量电子对样品的太阳吸收比退化作用程度是有区别的。而样品光谱反射率、表面形貌、表面成分的损伤效应类似,说明不同能量电子辐照下,样品的退化机理是一致的。     

FGH96涡轮盘低循环疲劳寿命分析技术与试验

分析FGH96涡轮盘的尺寸效应,分析了分别适合于FGH96亚尺寸盘和全尺寸盘的低循环疲劳寿命预测方法.成功设计了FGH96亚尺寸盘、全尺寸裂纹扩展盘试验件;通过低循环疲劳试验,展现了两种不同的低循环疲劳失效机理,验证了提出的低循环疲劳寿命预测方法;通过裂纹扩展试验,获得了FGH96全尺寸轮盘的裂纹扩展特性,揭示了FGH96全尺寸涡轮盘与紧凑拉伸试样裂纹扩展特性具有显著差别的客观规律;获得FGH96全尺寸涡轮盘580℃损伤容限值,明确某发动机高压涡轮盘损伤容限水平.      

用于发动机羽流试验研究的液氦热沉设计

超低温大型卧式热沉采用液氦制冷,将在国内实现热沉表面温度低于10K,主要用于航天发动机羽流效应试验,同时兼顾卫星等热真空试验.热沉主体结构为卧式圆筒型,为减小热损失,液氦热沉去掉了骨架,外部装有液氮热沉,两者采用一体化设计,液氮热沉既做液氦热沉的防辐射屏,又做液氦热沉的支撑.为增大抽速,舱体封头端设计了可拆卸的羽流吸附泵.羽流试验时液氦热沉、羽流吸附泵通液氦制冷,液氮热沉通液氮制冷,各部分热沉单独供液.对此大型热沉进行了方案设计、参数计算,对热沉预冷及稳态工况时的液氮、液氦消耗量进行了估算,分析了羽流试验时热沉抽气速率随试验工质温度的变化关系,得出液氦热沉对氮气的抽气速率可以达到107L/s量级.      

用整体传递矩阵法进行复杂转子机匣系统的应变能分析

提出了一种新的计算转子机匣系统动力特性的方法-整体传递矩阵法,并在此计算方法的基础上进行了系统应变能的计算和分析。整体传递矩阵法对于解决多转子（或机匣）相互耦合系统的问题有其独特的优点。通过分析系统应变能的分布情况可知转子的振动特性,从而确定如何采取减振措施。