Aiming at a 1-cm Orbit for Low Earth Orbiters: Reduced-Dynamic and Kinematic Precise Orbit Determination

The computation of high-accuracy orbits is a prerequisite for the success of Low Earth Orbiter (LEO) missions such as CHAMP, GRACE and GOCE. The mission objectives of these satellites cannot be reached without computing orbits with an accuracy at the few cm level. Such a level of accuracy might be achieved with the techniques of reduced-dynamic and kinematic precise orbit determination (POD) assuming continuous Satellite-to-Satellite Tracking (SST) by the Global Positioning System (GPS). Both techniques have reached a high level of maturity and have been successfully applied to missions in the past, for example to TOPEX/POSEIDON (T/P), leading to (sub-)decimeter orbit accuracy. New LEO gravity missions are (to be) equipped with advanced GPS receivers promising to provide very high quality SST observations thereby opening the possibility for computing cm-level accuracy orbits. The computation of orbits at this accuracy level does not only require high-quality GPS receivers, but also advanced and demanding observation preprocessing and correction algorithms. Moreover, sophisticated parameter estimation schemes need to be adapted and extended to allow the computation of such orbits. Finally, reliable methods need to be employed for assessing the orbit quality and providing feedback to the different processing steps in the orbit computation process. This revised version was published online in August 2006 with corrections to the Cover Date.     

General relativistic radiation hydrodynamics: Mixed-frame approach

I show how general relativistic 3D radiation hydrodynamic equations can be derived from the tensor formulation. Radiation quantities are differentiated with respect to the fixed coordinates while the interaction between matter and radiation is described by the comoving frame quantities. The formulation is covariant, and can be applied to any coordinates or spacetime; I show the derivation for the Schwarzschild spacetime as an example.     

热惯性对热冲击半无限体热应力影响非傅立叶效应研究

考虑超快速加热引起传热过程的非傅立叶效应,基于线性热弹性理论和表面热惯性特性,建立了带惯性第一类边界条件的半无限体的动态温度场、热应力场方程组。用拉普拉斯变换法对方程组进行求解。结果表明,快速加热在半无限体内产生温度场和应力场,且热和应力呈波动输运机制。讨论了温升率或热惯性对半空间温度场和应力场的影响,比较弹性波波速与热波波速之比动态热应力的影响。     

Collision Risk Mitigation in Geostationary Orbit

The short- and long-term effects of spacecraft explosions, as a function of the end-of-life re-orbit altitude above the geostationary orbit (GEO), were analyzed in terms of their additional contribution to the debris flux in the GEO ring. The simulated debris clouds were propagated for 72yrs, taking into account all the relevant orbital perturbations.The results obtained show that 6–7 additional explosions in GEO would be sufficient, in the long term, to double the current collision risk with sizable objects in GEO. Unfortunately, even if spacecraft were to re-orbit between 300 and 500km above GEO, this would not significantly improve the situation. In fact, an altitude increase of at least 2000km would have to be adopted to reduce by one order of magnitude the long-term risk of collision among geostationary satellites and explosion fragments. The optimal debris mitigation strategy should be a compromise between the reliability and effectiveness of spacecraft end-of-life passivation, the re-orbit altitude and the acceptable debris background in the GEO ring. However, for as long as the re-orbit altitudes currently used are less than 500km above GEO, new spacecraft explosions must be avoided in order to preserve the geostationary environment over the long term.     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

基于MEMS的微槽冷却系统在微纳卫星热控中的应用

介绍了基于微机电一体化系统(MEMS)的微槽冷却系统的研究成果。分析了将微槽冷却系统用于微纳卫星热控设计时的特殊要求。讨论了表征微槽冷却系统性能的水力学系统和传热性能。理论分析和数值模拟结果表明,微槽冷却系统可使大热流密度的热源芯片温度维持在较低的范围内,能满足微纳卫星热控的要求。研究认为,压降和热阻均较小的深槽可在小泵功率时提供较优的传热性能。     

发射特性对线性各向异性散射介质内瞬态温度分布的影响

考虑各向异性散射介质内的辐射传递方向，本文考察了辐射能的重新分配过程。利用射线踪迹法结合Hottel和Sarofim区域法推导了辐射传递系数(RTCs)。考虑一维各向异性参与性半透明灰介质。两边界表面为镜反射，一个表面半透明，另一个表面不透明。辐射传递系数用于计算辐射热源项。瞬态能量方程由全隐式控制容积法求解。外界辐射加热与对流冷却同时作用于边界表面。考虑四个线性散射相函数。以各向同性散射情况比较，研究不透明边界两侧发射特性和线性散射相函数对瞬态温度分布的影响。结果表明，各向异性散射与各向同性散射介质间的相对温度差异与散射不对称参数近似成正比。     

FY-2气象卫星在轨管理工程测控关键技术(上)

介绍了风云二号(FY—2)地球静止轨道自旋气象卫星工程测控的关键技术。分析了位置保持、姿态确定、星蚀和日凌的原理，给出了位置保持、姿态控制策略和地影、月影、日凌预报算法。并提出了一种检验定姿结果正确性的方法，提供了相应的工程计算参数。这些策略都已成功地用于FY—2卫星的在轨管理工程测控。     

遥感卫星的地面覆盖与轨迹控制

对遥感卫星的地面覆盖进行了分析，提出了为满足应用要求及有效载葆地面覆盖，卫星轨道的的选择方法。文中还讨论了地面轨迹的漂移及为了满足地面覆盖的地面轨这保持问题。     

刀刃法在轨MTF测量性能分析

文章主要研究采用刀刃法测量在轨遥感器的MTF。刀刃法MTF测量准确程度如何，需要有一个定量的客观的评价，文章用仿真的方法对MTF测量精度进行了检验，对于噪声对MTF的影响进行了研究。