K8、JK8机翼接头与检验量规协调准确度的提高

分析了 K8、 JL8机翼接头孔精加加后与检验量规位置协调的条件，介绍了为提高它们之间协调准确度所采取的措施及其效果。     

Late Stages of Stellar Evolution

A large fraction of ISO observing time was used to study the late stages of stellar evolution. Many molecular and solid state features, including crystalline silicates and the rotational lines of water vapour, were detected for the first time in the spectra of (post-)Asymptotic Giant Branch (AGB) stars. Their analysis has greatly improved our knowledge of stellar atmospheres and circumstellar environments. A surprising number of objects, particularly young planetary nebulae with Wolf-Rayet (WR) central stars, were found to exhibit emission features in their ISO spectra that are characteristic of both oxygen-rich and carbon-rich dust species, while far-IR observations of the PDR around NGC 7027 led to the first detections of the rotational line spectra of CH and CH⁺. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

增加纵向隔板解决推进剂晃动稳定问题

某型三级运载火箭为短粗结构，在研制过程中曾发生第三级推进剂晃动不稳定问题。分析认为，这是运载火箭的则体结构与推进剂晃动强烈耦合所致。为解决不稳定问题，提出在推进剂箱中增加纵向隔板，分别以４５°，９０°分隔。分析和试验表明，这种方法能提高推进剂的晃动频率，减小晃动质量，但结构复杂。主题词     

炭/炭复合材料防氧化涂层研究进展

介绍了近两年国内外开发的几种C/C复合材料高性能抗氧化涂层的微观结构和高温氧化行为,表明SiC-Al2O3-莫来石、SiC晶须增韧陶瓷、硅酸钇等涂层1500℃静态空气环境下均具有长时间防氧化能力,部分涂层还具有优良的抗热震性能。其中采用原位形成法制备的硅酸钇涂层具有极佳的抗氧化性能,可在1600℃空气中对C/C复合材料有效保护200 h。此外,还介绍了部分涂层的失效机理,并就C/C复合材料抗氧化涂层下一步研究重点提出一些见解。     

碳纤维复合材料高压球形容器研制

采用变带距方法对球形容器进行优化设计，并研制了一批产品。试验结果表明，在纤维设计应力相同条件下，采用变带距缠绕的球形容器，其复合材料重量比等带距缠绕的轻２４．５６％，而其容器特性系数高出１０．４％，能同时满足设计提出的强度和重量两方面要求。     

气体渗碳过程的动态控制

利用气体渗碳物质传递数学模型来仿真计算碳浓度分布，并根据计算结果在计算机上拟合出碳浓度与时间、温度、气氛碳势之间的关系式，此关系式对气体渗碳的动态控制具有指导意义。     

INS／GPS组合导航系统的容错研究

本文研究了INS/GPS组合导航系统的容错问题,并提出了一个两级故障检测及分离方案。通过采用该方案,INS/GPS组合导航系统将具有较高的容错能力,并能为用户提供连续、精确的导航信息。     

计算机辅助任意多边形排料

 本文描述了一种计算机辅助排料的算法。它能自动处理二维不规则形状物体的排料。排料的处理过程分为两个阶段。现介绍的为第一阶段的算法。计算实例表明,该方法可以明显减少计算量。并具有原材料利用率高的特点。 飞机蒙皮等钣金件的下料就涉及到大量的排料问题,在整张的金属板材上排成所需要的零件形状。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.