A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

振动对空间光通信系统误码率影响的分析

在空间光通信系统中，由于卫星平台的振动，使得光发射机发生振动，从而对通信系统的误码率产生影响，本文针对光射光束为高斯光束时，振动对误码率的影响问题进行研究。结果表明，在振动时不仅振幅影响着误码率，而且波长也对误码率有影响，但通信距离对误码率的影响不大，一般可以忽略。     

尺寸参数对气动液阀启动特性的影响

为气动液阀的启动过程建立了数学模型，分析了尺寸参数对该阀启动特性的影响。计算结果表明：在保证必要的工作寿命的前提下，适当地增大控制腔气孔的直径或增大靠近控制腔的活塞端面直径有利于提高该阀的响应能力。本文所得的结论有利于此类阀门的设计。     

空间智能桁架自适应模糊振动控制

研究了一种基于自适应模糊控制器的空间智能桁架振动控制方法。在考虑剩余模态影响的条件下建立了空间智能桁架的独立模态空间振动控制方程,并对自适应模糊控制器作改进,证明了控制系统的稳定性。仿真结果表明:该自适应模糊控制器可有效抑制桁架振动,控制效果明显优于传统模糊控制,同时能抑制控制溢出和观测溢出。     

八作动器隔振平台的通道耦合分析及解耦控制

分析一种对称结构的八作动器隔振平台的通道耦合特性。分析表明由于结构对称，当有效载荷质心位于平台纵轴的延长线上，且有效载荷的惯性主轴与平台对称轴平行时，平台可分解成两个独立的单自由度系统和两个2阶耦合子系统。利用矩阵同时对角化方法对平台的2阶耦合子系统进一步解耦，仿真结果显示解耦控制能够衰减被动隔振的谐振峰，改进平台的隔振性能。     

固体火箭发动机试验模态分析技术研究

将固体火箭发动机划分为144个自由度，采用锤击法，单点激励多点响应（SIMO）对其在4种工况下进行了频率响应的测量，应用了多种方法进行模态参数识别和数据拟合，并对其结果进行比较，获得了发动机在各工况1kHz以内的各阶固有频率、振型和阻尼，并对试验模态分析技术在固体火箭发动机试验中的应用进行了研究。     

航天器振动试验中的动力吸振现象

振动环境试验是考验航天器中各分机力学品质的重要试验,分机适应力学环境的能力在设计阶段必须充分考虑。目前分机的力学环境条件往往是在考虑了一定的安全系数后,以分机安装处界面的加速度包络曲线给出的。然而一般来说,分机振动试验过程中的边界条件与分机实际工作状态的边界条件是不同的。具体地说就是在振动试验过程中分机通过试验转接托架与振动台面相连,实际工作状态是分机安装在安装件(卫星各舱板)上。由于试验转接托架与安装件的动力学特性不一样,根据多自由度弹簧质量阻尼系统的动力吸振原理,可以推出试验状态分机在固有频率处存在过试验现象。为了减少过试验对分机带来的危害,新的试验方法研究(加速度响应限幅控制、阻抗特性模拟法、限力技术等)已成为国内外航天工作者研究的热点。文章详细阐述了振动试验中动力吸振的机理及过试验产生的缘由。     

The effect of small vibrations on Marangoni convection and the free surface of a liquid bridge

The effects of small vibrations on Marangoni convection were investigated experimentally using a liquid bridge of 5 cSt silicone oil with a disk diameter of 7.0 mm, and an aspect ratio close to 0.5. Experiments were performed to determine the critical temperature difference data for no vibration case and with small vibrations applied. The experimental results have shown that the effect of small vibrations on the onset of oscillatory flow is small since the critical temperature difference data for different aspect ratios were not affected by the vibrations. To clarify the surface oscillation phenomena induced by external vibrations, a 3-D numerical simulation model was also developed using a level set algorithm to predict the surface oscillations of isothermal silicone oil bridges. By subjecting the liquid bridge to small vibrations, the surface oscillation characteristics were predicted numerically, and the numerical results compared well with the predictions of an analytical model proposed previously. Furthermore, the effect of small vibrations on the surface vibration amplitude of the liquid bridge is also discussed.     

振动状态下频率源特性测试技术研究

阐述了频率稳定性时频域表征的理论和测试方法,以及在振动条件下测量频率稳定性的意义,详细介绍了测量系统的组建方案及工作原理.最后提供了部分测试数据及测试曲线,并对测试系统的经济效益和社会效益进行了简单分析.该测试系统具有噪底低,体积小,便于携带,操作简便等特点,其综合技术指标达到国内领先水平,不仅适用于振动状态下的频率源特性测试,而且完全可以作为通用测试系统用于实验室、工厂等.