Development and performance evaluation of tropospheric scintillation model on Ku-band satellite link over Akure,Nigeria

Existing amplitude scintillation prediction models often perform less satisfactorily when deployed outside the regions where they were formulated. This necessitates the need to evaluate the performance of scintillation models developed in one region using data data from other regions while documenting their relative errors. Due to its variation with elevation angle, frequency, other link parameters and meteorological factors, we employed three years (January 2016 to December 2018) of concurrently measured satellite radio beacons and tropospheric weather parameters to develop a location-based amplitude scintillation prediction model over the Earth-space path of Akure (7.17^oN, 5.18^oE), South-western Nigeria. The satellite beacon measurement used Tektronix Y400 NetTek Analyzer at 1 s integration time while meteorological parameters, namely; temperature, pressure and relative humidity were measured using Davis Vantage Vue weather station at 1 min integration time. Comparative study of the model’s performance with nine (9) existing scintillation prediction models indicates that the best and worst performing models, in terms of root mean square error (RMSE), are the Statistical Temperature and Refractivity (STN) and direct physical and statistical prediction (DPSP) models with values 11.48 and 51.03 respectively. Also, worst month analysis indicates that April, with respective enhancement and fade values of 0.88 and 0.90 dB for 0.01% exceedance, is the overall worst calendar month for amplitude scintillation.     

基于梯度提升决策树的量子科学实验卫星光学实验预测

量子科学实验卫星在轨运行期间完成4种光学实验，地面监测人员通过遥测参数阈值判断卫星是否进行光学实验、实验类型及实验结果.这种方法需要预先设定大量阈值，并且这些阈值需要根据在轨卫星重新设定，可扩展性较差.针对以上问题，提出一种基于机器学习的光学实验判别方法，将量子科学实验卫星的光学实验监测任务抽象为机器学习中的多元分类问题，构建分类模型，利用量子科学实验卫星的真实历史遥测数据对模型进行训练，并通过真实实验计划对训练得到的模型进行验证.实验结果表明，本文提出的方法在没有专家先验知识的前提下，判别准确率达到99%，可用于量子科学实验卫星光学实验的实时监测任务.提出的基于机器学习的判别方法具有较强的可扩展性，可应用于卫星在轨运行的其他监测任务.      

PDM技术及其在直升机研制中的作用

本文首先分析了当前直升机在运用CAD/CAE/CAM技术进行研制中存在的一些问题,接着提供了解决的方法,介绍了PDM的概念、构成、主要功能。最后简述了PDM技术在直升机研制中的作用,以及企业在实施PDM当中应注意的一些问题。     

First estimations of the aerosol optical thickness using Langley Method at Southern Brazil (29.4°S, 53.8°W)

The first estimations of the aerosol optical thickness (AOT) using Langley Method at Southern Space Observatory (SSO) at Southern Brazil (29.4°S, 53.8°W) are presented. In addition to ozone and sulphur dioxide columns, AOT can be obtained using Brewer Spectrophotometer at specific wavelengths: 306.3, 310.1, 313.5, 316.8 and 320.1 nm. The AOT was obtained for the period from November/2002 to May/2003. Very low AOT averages were obtained, whose values were about 0.21 ± 0.03 at 306.3 nm, 0.21 ± 0.02 at 310.1 nm, 0.19 ± 0.02 at 313.5 nm, 0.20 ± 0.02 at 316.8 nm and 0.20 ± 0.02 at 320.0 nm for all period analysed. Different behaviour of AOT were obtained at two daily specific periods of aerosol accumulation, one in the afternoons from November/2002 to February/2003, caused mainly by a mild biomass burning season’s in the region and other in the mornings from March to May/2003, due the high relative humidity presented in the region studied.     

CBERS-1卫星IRMSS数据在城市绿地系统规划的应用

文章以CBERS -1卫星长沙幅IRMSS数据作为基础资料 ,利用PCI遥感图像处理软件对数据进行了预处理和应用实验。实验证明CBERS -1卫星的IRMSS数据图像信息丰富 ,可解译程度较高 ,能满足大中城市中等比例尺城市绿地系统规划遥感调查的要求     

改进的次时间最优控制

本文在[1][2]基础上进一步探讨了次时间最优控制的改进问题,深入地阐明了次时间最优控制的某些特性后,提出了一个新的改进的设计方法。按照这种方法设计控制系统,不但实用而且可以大幅度提高次时间最优控制的最优性。并用实例比较了各种方法,证明了本文提出的方法的优越性。本文提出的方法应用于工程设计,对于提高系统的最优性是非常有效的。     

构建我国"绿色"税收体系的设想

通过阐述“绿色”税收体系的理论基础是外部性理论，分析了我国工业化进程中的环境现状，环境污染造成的危害，同时借鉴西方国家开征“绿色”税制的成功经验，提出了费改税、完善税种、开征新税、完善相关政策等构建我国“绿色”税收体系的初步设想。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

光学中心偏测量仪软件研制

文章介绍了北京空间机电研究所自行研制的光学中心偏测量仪的软件设计思路、工作原理 ,并对一些关键技术进行了讨论。     

某型无人直升机遥控系统BIT技术研究与实现

机内测试 (Built- In Test,简称 BIT)是一种能显著改善系统或设备测试性和诊断能力的重要技术手段。文中研究如何在遥控系统中运用 BIT技术来提高其测试性 ,并提出了一种分层测试方案 ,研究成果已应用于某型无人驾驶直升机 ,满足了遥控系统的测试性要求