Fault mode probability factor based fault-tolerant control for dissimilar redundant actuation system

This paper presents a Fault Mode Probability Factor (FMPF) based Fault-Tolerant Control (FTC) strategy for multiple faults of Dissimilar Redundant Actuation System (DRAS) composed of Hydraulic Actuator (HA) and Electro-Hydrostatic Actuator (EHA). The long-term service and severe working conditions can result in multiple gradual faults which can ultimately degrade the system performance, resulting in the system model drift into the fault state characterized with parameter uncertainty. The paper proposes to address this problem by using the historical statistics of the multiple gradual faults and the proposed FMPF to amend the system model with parameter uncertainty. To balance the system model precision and computation time, a Moving Window (MW) method is used to determine the applied historical statistics. The FMPF based FTC strategy is developed for the amended system model where the system estimation and Linear Quadratic Regulator (LQR) are updated at the end of system sampling period. The simulations of DRAS system subjected to multiple faults have been performed and the results indicate the effectiveness of the proposed approach.     

Review and propositions for the sliding/impact wear behavior in a contact interface

A thermal-solid-liquid complex operational environment induces structural interface developing a typical coupling sliding/impact wear behavior. It results in contact damage until systems fail, which may cause significant economic losses and catastrophic consequences. The key point of solving this problem is to reveal the coupling damage mechanism of the sliding/impact behavior in typical systems and life characterization under a complicate evolving environment. This has been a hot topic in the area of mechanical reliability. The main work in this paper can be concluded as follows. Firstly, the main industries in which the “sliding/impact behavior” takes place have been introduced. Then, existing studies on the wear mechanism and degree analysis are presented, which includes surface morphology analysis, wear debris analysis, and wear degree measurement. Meanwhile, existing problems in theoretical modeling and experiments in current research are summarized, so as to point out a bright direction for future research on wear prediction. They include interface contact modeling, mathematic coupling mechanism modeling, wear equation establishment, and wear life characterization, which can provide some new ideas for improving the existing studies on the sliding/impact wear behavior.     

弹道交班自适应算法研究

为实现复合制导不同制导弹道的平滑过渡,用二阶吻合法设计了一不同制导律间的指令交接导引段。建立了自适应弹道交接导引算法的模型。理论分析和仿真结果表明,该算法具较好的弹道过载平滑能力,有一定的应用价值。     

纵向短周期模态试飞方法和选择

对几种纵向短周期模态试飞方法及其适用性进行了初步分析。结合实际飞行经验,提出了初步判断飞机短周期特性及选择试飞方法。     

Tunnel/predictor display with two-axis control coordination and simplification

A longitudinal-lateral control coordination and simplification concept is considered for a tunnel/predictor display, which presents the command flight path and a specified future aircraft position in a 3-dimensional format to the pilot, for improving flight path control. A basic element of the proposed concept is the generation of common longitudinal-lateral transfer characteristics of the predictor-aircraft system for the crossover frequency region. Control coordination is supported by a dynamics similarity between the longitudinal and the lateral response characteristics of the predictor position in closed-loop pilot control actions. The control coordination and simplification concept is considered to support the pilot in manual flight path control, directed at an enhancement of his control performance and at a reduction of his workload. Results from pilot-in-the-loop simulation experiments support the theoretical findings and show the effectiveness of the proposed predictor concept with control coordination.     

基于模糊粗糙集的飞机远程故障诊断模型研究

粗糙集和模糊集结合在飞机故障诊断领域有巨大的发展潜力。针对当前飞机故障诊断中所存在的问题,借助C/S模式,将粗糙集和模糊集结合,提出一种新型的飞机远程故障诊断模型,并且开发出远程诊断系统框架。系统的可行性和有效性得到了飞机故障诊断实例的证实。该系统具有客户端响应快、系统效率高、诊断及时的特点,对于当前民用飞机远程故障诊断具有重要应用价值。     

鲁棒变结构制导规律研究

研究存在相对速度测量噪声时的鲁棒制导问题，根据一类变结构制导规律，分析了相对速度测量噪声、制导参数对导引收敛性的影响，以弹道收敛为准则，给出了实现鲁棒制导的条件，研究结果对设计先进的雷达制导系统具有重要意义。     

动态差压检测系统的共模误差研究

主要针对以差压变送器为核心的动态差压检测系统的特点 ,应用流体网络分析方法 ,提出了动态差压检测系统中的共模误差问题。理论分析和仿真计算结果表明 :共模误差与检测系统两侧引压管路的不一致性直接相关 ,为了获得动态差压信号的准确检测 ,必须对动态差压检测系统的共模误差予以抑制     

正—反激组合式变换器与单端式变换器的比较

以５０Ｗ变换器为例，分别从磁性元件的大小，功率管上的电应力、磁恢复问题，输出纹波及输出特性等方面，详细分析比较了组合式变换器与单端式变换器的优缺点，并给出了具体数据，提出了正－反激组合式变换器具有电压应力低，磁性元件小，体积小，重量轻，输出纹波小及可靠性高的结论。     

导弹电液伺服机构的模糊滑模变结构跟踪控制研究

为减小导弹电液伺服机构滑模变结构跟踪控制中的抖振,研究了一种模糊滑模变结构控制(FS-MVSC)方法。给出了模糊滑模控制器的构成,以及模糊化、模糊规则与推理、反模糊化处理的方法。在保持系统对参数变化和外干扰不确定强鲁棒性的同时,可使系统具有较优的动态响应和稳态控制精度。仿真结果表明,该控制方案有效。