论相似准则,风洞尺寸与数据精,准度与关系

本文从相似理论到风洞实验，用大量的论据和事实、说明了风洞实验数据的精度，并不取决于风洞尺寸的大小，而只取决于实验条件及模型尺寸满足Ｎ－Ｓ方程的解的近似程度。文中讨论了怎样大小尺寸的风洞，既满足了空气动力学的研究发展和型号试验，又适合我国国情的经济性要求这个人们普遍关心的问题。最后介绍了ＮＡＳＡ给出的一组能较好满足上述两方面要求，且具有某种唯一性条件的不同Ｍａｃｈ数范围下的风洞最好尺寸，供有关部门和人员参考     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

歼击机发动机设计载荷剖面的相似转换法

本文提出了获得歼击机发动机载荷剖面的相似转换法。通过应用飞行力学基本方法,以推力作为转换的核心,可以由一种实测的基准机剖面得到其它类似机型的剖面。本文提出的方法在实际工程中已得到应用。      

运载火箭起飞噪声环境缩比模型试验方法

基于相似理论建立缩比模型试验相似准则,提出了火箭发动机喷流声场试验预示方法的流程。通过缩比模型系留点火试验,根据几何相似、喷流参数相似、发射环境相似来预示起飞噪声环境,在国内首次给出了运载火箭表面的噪声环境的空间相关特性,结果表明预测结果与遥测数据之差小于1.5 dB,校验了缩比模型方法的有效性。缩比模型方法对于我国新一代运载火箭的起飞噪声环境预示、噪声载荷设计、地面试验具有重要意义。     

基于新息灰预测的卫星遥测参数状态预测及应用

<正>确的预测是进行科学决策的依据。在航天测控领域中对卫星状态的准确预测是正确发布指令的重要依据,而卫星遥测参数趋势预测是状态预测的前提。根据卫星遥测数据特定的相似性,利用相似性原理和新陈代谢原理,充分利用最新的遥测信息,建立适用于卫星遥测数据的新息灰预测模型。通过工程数据仿真计算,验证该方法的正确性和可靠性。     

断裂韧性可靠性分析的相似计算法

根据断裂力学原理，动用相似理论求出断裂韧性ＫＩＣ〉ＧＩＣ，ＪＩＣ和δＣ之间的相似指标，然后利用正态函数的加法定理，对断裂韧性分散性进行相似计算，从而可以根据已知的断裂韧性随机信息，对难以求解或未知的其它断裂韧性参数进行可靠性分析和推断。计算介绍了一些实际应用。     

基于知识重用的刀具选配技术研究

在分析了传统刀具选配模式存在的不足的基础上,对基于知识重用的刀具选择技术进行了研究.采用实例推理技术进行刀具智能选择,对刀具智能选择过程中涉及的特征提取、知识表示、检索策略、相似度计算等实例推理的关键技术进行了研究.     

A comparative study on acoustic damping induced by half-wave, quarter-wave, and Helmholtz resonators

The damping characteristics of three-type resonators, a half-wave, a quarter-wave, and a Helmholtz resonator are studied experimentally by adopting linear acoustic test. A quantitative acoustic property of sound absorption coefficient in a model enclosure with the resonators is measured and thereby, the acoustic-damping capacity of a resonator is characterized. For a comparative study on acoustic damping, the damping capacity of a half-wave resonator is compared with that of the other resonators. A half-wave and a quarter-wave resonators have the same damping mechanism, but a quarter-wave resonator has much larger damping capacity than a half-wave resonator with the same diameter of a single resonator. It is found that shorter length of a resonator has the advantage of longer one with respect to the damping capacity. The damping capacity of a Helmholtz resonator increases with cavity volume and does as the orifice length decreases. A Helmholtz resonator has the highest damping capacity of three-type resonators and a half-wave resonator has the lowest. Besides, a Helmholtz resonator requires the smallest number of resonators for optimal damping. The design criterion of each resonator on the optimal damping is provided by the normalized parameter of open-area ratio and the similarity behavior for the optimal damping is observed for various enclosure diameters.     

一种基于实例推理的刀具选配方法研究

为了快速准确地选择出合适的切削刀具,提出了一种基于实例推理的刀具选配方法,利用以往的经验和知识来解决新的刀具选择问题.重点研究了刀具选配实例的知识表示和检索匹配.最后举例验证了方法的可行性.