排序方式: 共有24条查询结果,搜索用时 15 毫秒
1.
多向编织碳/碳复合材料力学行为研究 总被引:5,自引:1,他引:4
本文综述了作者近十年来在多向编织碳/碳复合材料力学性能研究方面的成果,包括力学模型与强度准则、热应力分析、断裂行为、性能预报与优化设计、超高温试验技术及组织性能与高温退化等内容,并分析了其存在的新问题和解决途径。 相似文献
2.
本文利用摄动法和广义傅氏级数法分析了在中面载荷作用下正交各向异性矩形板后屈曲行为,对几种典型的纤维增强环氧复合材料矩形板后屈曲行为给出了结果,可供工程设计应用参考。 相似文献
3.
本文讨论了仿人智能飞控系统的设计,提出了系统的基本结构,仿人智能控制的基本原则,特征模型的划分和智能控制规律的构成。据此,针对某型飞机设计了仿人智能飞行控制系统的知识库、数据库、规则库和推理机构。同时,用数字仿真证明了这种系统具有优良的控制品质,很强的鲁棒性和适应性,以及良好的解耦能力。 相似文献
4.
5.
应力集中对GH2036合金低周疲劳—蠕变性能的影响 总被引:1,自引:0,他引:1
在对光滑试件和缺口试件进行高温疲劳-蠕变实验的基础上,分析了应力集中对GH2036合金低周疲劳-蠕变特性的影响。结果表明缺口试件的循环寿命远远低于光滑试件的循环寿命。将应变范围划分方法和改进的Neuber原理相结合,得到了缺口部位高温低周疲劳-蠕变寿命估测的方法。用该方法估算GH2036合金的寿命并与实测寿命结果进行比较,证明此方法的预测效果良好。 相似文献
6.
Mehdi Eshagh Morteza Ghorbannia 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2013
The orbital elements of a low Earth orbiting satellite and their velocities can be used for local determination of gravity anomaly. The important issue is to find direct relations among the anomalies and these parameters. Here, a primary theoretical study is presented for this purpose. The Gaussian equations of motion of a satellite are used to develop integral formulas for recovering the gravity anomalies. The behaviour of kernels of the integrals are investigated for a two-month simulated orbit similar to that of the Gravity field and steady-state ocean circulation explorer (GOCE) mission over Fennoscandia. Numerical investigations show that the integral formulas have neither isotropic nor well-behaved kernels. In such a case, gravity anomaly recovery is not successful due to large spatial truncation error of the integral formulas. Reformulation of the problem by combining the orbital elements and their velocities leads to an integral with a well-behaved kernel which is suitable for our purpose. Also based on these combinations some general relations among the orbital elements and their velocities are obtained which can be used for validation of orbital parameters and their velocities. 相似文献
7.
8.
在内喷管倾角为10°,20°,30°,40°和底部二次流为0.0%,0.4%,1.0%,1.4%,2.0%,3.0%的工况下,实验测量了两单元瓦状塞式喷管的底部压强。结果表明在不同的外界反压作用下,底部具有开放、闭合和开闭过渡三种气动状态,底部的这种特性不随内喷管倾角和底部二次流的变化而变化。实验研究了80%,40%,30%和20%截短两单元直排塞式喷管的高度特性,数值模拟计算了实验喷管的性能和塞锥表面的压强分布,数值模拟结果与实验测量数据吻合较好。结合实验数据和数值模拟结果分析了塞锥截短和底部气动特性对塞式喷管性能的影响。 相似文献
9.
10.
采用高频感应钎焊方法连接了航天推进系统的异种金属(钛合金与不锈钢)薄壁小直径导管结构,结构的质量和性能远远优于螺栓连接的导管结构.钎焊接头静态拉伸试验发现,银基钎料钎焊的接头承载能力要优于铜基钎料.对静态拉伸断裂接头的微观组织进行了分析,结果发现,银基钎料钎焊的接头区域出现的裂纹仅在钎缝区域萌生和扩展,当裂纹扩展到钎缝与母材的界面位置时停止扩展.铜基钎料钎焊的接头区域的裂纹从3个位置萌生:钎缝2种组织的交界处,钎缝与钛合金、不锈钢的界面.裂纹驱动力主要是由静态拉伸载荷和异种金属钎焊接头失配行为构成的,而裂纹扩展抗力主要与钎焊接头的微观组织有关. 相似文献