Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

Ionospheric disturbances on 8 September, 2010: Was it connected with the incoming moderate Chongqing earthquake?

Earthquake prediction stimulates the searches for a correlation between seismic activity and ionospheric anomalies. Contrary to common focuses on strong earthquakes, we report the ionospheric disturbances, 2 days before a moderate Ms = 4.7 Chongqing earthquake (29.4°N, 105.5°E, depth = 7.0 km, occurred at 21:21 LT, 10 September, 2010) with the data of ground-based ionosondes and IGS receivers. The data covering the period under the quiet geomagnetic conditions and a geomagnetic storm was analyzed with upper and lower bounds. It is found that there were significant enhancements of foF2 and total electron content (TEC) on the afternoon of 8 September, 2010, with a limited area close to the epicentre, which was different from the feature of ionospheric perturbations triggered by the geomagnetic storm on 15 September. Taking into account the heliogeomagnetical condition, we conclude that the observed ionospheric enhancements were very likely associated with the forthcoming moderate Chongqing earthquake, which implies that the relationship between the amplitudes of ionospheric disturbances and earthquakes is very complicated.     

人工辅助心脏用永磁轴承盘式无刷电机设计与研究

介绍了一种应用于人工辅助心脏的永磁轴承无位置传感器盘式无刷直流电动机的结构与电磁场仿真计算方法及结果,并对其温度场进行仿真计算。该电机体积重量小,无机械轴承,避免了对血液的破坏,且运行安全可靠。     

TC2钛合金异型件热成形工艺研究

针对TC2钛合金异型零件的成形难题,设计了沿型面压边结构和中心顶出结构的2种成形工装,采用在不同温度下热成形的工艺方法.最后得出此种异型零件的适宜成形温度及成形工装结构.     

Gd2SiO5纳米粉体的并流化学共沉淀法合成

以Gd₂O₃和正硅酸乙酯(TEOS)为原材料,采用并流化学共沉淀法合成Gd₂SiO₅粉体材料。研究Gd₂SiO₅前驱体的热响应特征、Gd₂SiO₅粉体的物相组成和微观形貌,并对Gd₂SiO₅粉体的合成机理进行初步探讨。结果表明:前驱体的低Gd/Si摩尔比和反应体系的高pH值会导致Gd₂SiO₅粉体生成Gd_9.33(SiO₄)₆O₂杂质相,相反则会导致生成Gd2O3杂质相。当Gd/Si摩尔比为20∶11、pH值为9~10、合成温度为1000~1300℃时,合成的粉体纯度较高,Gd₂SiO₅颗粒呈不规则形貌特征,平均粒度为100~200 nm。Gd₂SiO₅合成过程中,前驱体以一种—[Si—O—Gd]—网络结构存在,在煅烧过程中逐渐转化为Gd₂SiO₅晶体以及Gd_9.33(SiO₄)₆O₂和Gd₂O₃杂相。     

2D C/SiC-ZrB2复合材料的烧蚀性能

用ZrB2微粉对2D C/SiC基体进行改性,研究了化学气相渗透结合浆料浸渍及先驱体浸渍裂解工艺制备2DC/SiC-ZrB2复合材料在氧-乙炔焰和1800℃甲烷风洞环境中的烧蚀行为.结果表明:在氧-乙炔环境中,2D C/SiC-ZrB2的线烧蚀率和质量烧蚀率分别为6.1×10-2 mm/s和1.0×10 -2g/s,相对2D C/SiC复合材料而言,ZrB2微粉并没有提高C/SiC复合材料的抗烧蚀性能.在1800℃甲烷风洞环境中,涂层致密度起主要作用,涂层致密度相同时,复合材料的开气孔率越大,质量烧蚀率越大,ZrB2微粉的渗入对C/SiC复合材料的烧蚀性能影响不大.     

J2项和大气阻力摄动作用下卫星编队构型的演化分析

研究卫星编队构型在J2项摄动和大气阻力摄动作用下的演化进程。从相对运动动力学模型出发,分别加入J2项摄动和大气阻力摄动因素,采用数值积分对所获得的运动方程求解,得到参考星和环绕星在惯性坐标系中的绝对运动规律;将两星的绝对运动规律作差后,利用坐标转换矩阵,将惯性坐标系中两星的相对运动规律转换到Hill坐标系中。由于该方法没有经过任何简化,故研究摄动的影响时不存在误差。最后通过仿真分析,给出了J2项摄动和大气阻力摄动作用下卫星编队构型演化的相关结论,并提出进一步研究的方向。     

基于J2ME和J2EE应用平台移动电子商务应用模型研究

目的提出了基于J2ME的移动电子商务系统的应用模型,能较好的解决移动电子商务普遍存在的一些关键问题.方法采用J2ME和J2EE技术体系实现移动电子商务系统的应用模型,并提出交易中安全问题的解决方案.结果利用J2ME和XML技术实现移动购物系统解决方案.结论该模型具有较高灵活性、应用性、安全性和高效性.     

SCIAMACHY limb measurements of NO2, BrO and OClO. Retrieval of vertical profiles: Algorithm,first results,sensitivity and comparison studies

The Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY) measures scattered sun light also in limb viewing mode (i.e. tangential to Earth’s surface and its atmosphere), which allows determining vertical profiles of atmospheric trace gases. First results on the retrieval of NO₂, BrO and OClO profiles from the SCIAMACHY Limb measurements are presented and compared to independent satellite and balloon borne observations.     

一种便携式多通道精密测温仪

介绍了利用数字式温度传感器 DS1 6 2 4构成的多路温度测量仪器。它具有线路简单 ,测量精度高的优点 (在 - 5 5～ 1 2 5°C内 ,精度优于 0 .0 5°C) ;带有计算机接口 ,能够实现长时间连续测量。