Excavation of artificial caverns inside asteroids by leveraging rotational self-energy

Future space ventures will likely require exploitation of near-Earth asteroid resources. Moreover, it can be envisaged that asteroids may host habitats in their interiors. In fact, a cavern inside an asteroid would be a natural radiation shield against cosmic radiation and may also serve as a confined environment for storage of mined material such as water ice or other processed volatiles such as propellants. To this end, this paper proposes to leverage the asteroid rotational self-energy to remove material from the asteroid interiors and create a spherical cavern, by means of the orbital siphon concept. The siphon is a chain of tether-connected payload masses (the asteroid material), which exploits the rotation of the asteroid for the delivery of mass from the asteroid to escape. Under certain conditions the siphon can be initiated to ensure self-sustained flow of mass from the asteroid to escape. A net orbital siphon effect is generated by connecting new payloads at the bottom of the chain while releasing the upper payloads. Key parameters are discussed, such as the required siphon dimension and the maximum size of the internal cavity that can be excavated, as a function of the asteroid rotational period. Moreover, assuming elastic material behaviour, a closed-form expression for the stress tensor is found and a failure criterion is used to identify regions in the asteroid interiors subjected to the larger stresses. It is shown that the conditions for failure are relaxed as the radius of the internal void increases.     

Orbital stability close to asteroid 624 Hektor using the polyhedral model

We investigate the orbital stability close to the unique L4-point Jupiter binary Trojan asteroid 624 Hektor. The gravitational potential of 624 Hektor is calculated using the polyhedron model with observational data of 2038 faces and 1021 vertexes. Previous studies have presented three different density values for 624 Hektor. The equilibrium points in the gravitational potential of 624 Hektor with different density values have been studied in detail. There are five equilibrium points in the gravitational potential of 624 Hektor no matter the density value. The positions, Jacobian, eigenvalues, topological cases, stability, as well as the Hessian matrix of the equilibrium points are investigated. For the three different density values the number, topological cases, and the stability of the equilibrium points with different density values are the same. However, the positions of the equilibrium points vary with the density value of the asteroid 624 Hektor. The outer equilibrium points move away from the asteroid’s mass center when the density increases, and the inner equilibrium point moves close to the asteroid’s mass center when the density increases. There exist unstable periodic orbits near the surface of 624 Hektor. We calculated an orbit near the primary’s equatorial plane of this binary Trojan asteroid; the results indicate that the orbit remains stable after 28.8375?d.     

空战机动动作库设计方式研究

具体阐述了两类常见空战动作库的设计 :典型战术动作库和基本操作动作库 ,详细分析了这两类空战机动动作库的不足 ,最后提出了改进动作库设计的具体意见和建议。     

一种在线神经网络在补偿飞机模型不确定性误差中的应用

讨论了一种基于神经网络动态逆的直接自适应控制方法，并应用于超机动飞机的飞行控制中。基本控制律采用非线性动态逆方法进行设计，对由于模型不准确导致的逆误差采用单隐层神经网络进行在线补偿。仿真结果表明，神经网络通过补偿由于模型不准确引起的逆误差，弥补了非线性动态逆要求精确数学模型的缺点，提高了整个控制系统的鲁棒性，而且可以大大简化动态逆控制律的设计。     

一种基于误差四元数的战术导弹垂直发射姿态调转控制器

针对战术导弹垂直发射姿态调转时的快速性要求，研究了垂直发射快速姿态调转的控制问题。首先基于误差四元数并结合垂直发射的具体特点，建立了战术导弹垂直发射的非线性数学模型；然后通过李亚普诺夫第二方法进行控制系统设计，得出了基于误差四元数反馈控制器。分析了系统的稳定性和鲁棒性。该控制器实现了绕欧拉特征轴的旋转，缩短了姿态调转的时间，最后通过仿真验证其有效性。     

轮控小卫星姿态大角度机动递阶饱和控制器设计

针对采用反作用飞轮的小卫星姿态大角度机动控制，在反作用轮输出力矩受限、速率饱和的约束条件下，采用递阶饱和方法，即限制卫星每次姿态机动的最大偏差，对姿态偏差进行逐次消除。在毋需获知最优机动轨迹规划的情况下，可用于卫星任意时刻的姿态捕获和机动控制。数学仿真结果表明，本文设计的控制算．去能够实现快速姿态机动任务，具有良好的鲁棒性。     

FY-1C/D极轨气象卫星及其在轨运行

简要说明了风云一号(FY-1)极轨气象卫星的总体情况。介绍了FY-1C星运行5年。D星运行2年后的测控、电源、热控、敖传、扫描辐射计和星载数据收集与分发(DCDS)分系统、有效载荷空间粒子成分监测器。以及姿控和星载计算机的在轨运行情况。在轨测试结果表明，两星的在轨运行、功能和性能符合任务书的要求。最后总结了长寿命高可靠稳定优质业务运行的FY-1C，D星的创新点、主要成绩，并给出了部分应用情况。     

翼伞雀降技术

雀降是翼伞的一种重要性能,在本质上是一种小心操纵的动力失速,使回收系统以最小的速度着陆,降低着陆冲击,实现定点着陆。文章简要介绍了翼伞雀降技术的概念、雀降的典型过程和影响雀降性能的主要因素。目前有限元模拟技术已经用于大型冲压翼伞的雀降技术研究中。随着回收载荷和空投物质量的增加,原来用于翼伞雀降的伺服机构已不再适用,各国正在寻找新的动力源或方法来实现自动雀降。     

远程导引可行飞行方案寻求算法研究

提出了一种寻求远程导引可行飞行方案的算法，能够满足远程导引对测控、日照、燃料和时间等各方面的要求；重点论述了Lambert一次变轨方案，给出了算法的具体步骤和主要模块的实现方法；最后给出了一个算例，说明算法是切实可行的。     

直升机机动飞行逆仿真技术研究进展

回顾了直升机机动飞行逆仿真技术国内外发展概况，借鉴国内外的研究成果，针对逆仿真核心技术的发展现状进行了分析和讨论，在此基础上，对直升机机动飞行逆仿真技术的进一步发展趋势进行了分析。