微型多路 PCM 遥测编码器的设计

针对遥测系统愈来愈小的重量和体积的要求，介绍遥测系统发送端ＰＣＭ遥测编码器的几种实现方法，并对某遥测系统的ＰＣＭ编码器采用了数字逻辑电路来实现，详细介绍其设计思路及过程。设计的编码器，全部控制电路由一片可编程逻辑器件（ＰＬＤ）来完成，减小了电路板的面积。     

基于等效板的含离散源损伤机翼结构分析

研究离散源损伤对机翼结构的影响,可以大幅度提高飞机在不良损伤事故下的生存能力.由于机翼内部结构复杂,很难对含离散源损伤机翼结构进行精确分析,而且精确的建模和仿真在建模与计算过程中往往也非常耗时.因此,以含离散源损伤机翼为对象,采用有限元优化设计方法,确立了一种机翼结构等效板模型的建模方法.建立的等效板模型可对含离散源损伤机翼实现快速、准确的静力学和动力学分析.     

原子钟时域频率稳定性计算方法

首先给出时域频率稳定性分析中各种方差的实用计算公式,并在此基础上分析各种方差特性,总结归纳其适用范围。分析表明：①阿仑方差是时域频率稳定性分析中最常用的方法,但不能区分调相白噪声和调相闪变噪声;②改进阿仑方差通过相位平滑运算能识别这2种噪声;③时间方差和时间总方差主要用于描述频率源的时间波动,主要用于分析调相噪声;④当频率漂移项较大或受甚低频噪声影响时,哈达玛系列方差能给出很好的测量特性。     

应用等效系统法评价飞行品质

本文介绍等效系统方法在评价飞行品质中的应用,包括等效系统方法的原理、所采用的数学模型和进行等效系统拟配的数学方法。最后,介绍了具体拟配过程中应当考虑的若干问题。     

飞机纵向高阶等效系统品质参数辨识研究

对飞机纵向高阶等效系统模型的可辨识性进行了分析,指出原有的辨识飞行品质参数方法存在的问题,并提出新的解决方案,即首先对原始模型进行转换,得到一组可辨识性强的模型,然后综合引用极大似然方法和Ｅｘｔｅｍｅ单变量寻优方法辨识新的模型及参数,最后利用双步ＱＲ分解技术求出与原始模型中的相对应的。物理意义明确的飞行品质参数,另外,针对现代主动控制飞机时间延迟τ较大的特点,提出了一种新的处理时间延迟环节ｅ＾－τ     

球面收敛调节片喷管RCS数值模拟研究

结合物理光学迭代法(IPO)和等效棱边电磁流法(EEC),自主开发了电大尺寸腔体电磁散射特性计算程序,并通过对某试验模型雷达散射截面积(RCS)进行计算,完成了程序的可靠性验证。利用该程序对带有电磁信号遮挡板且采用3种不同尾缘修形技术的球面收敛调节片矢量喷管(SCFN)进行了RCS数值模拟研究。结果表明:随着入射方位角的增大,喷管的RCS整体上有减小的趋势;喷管尾缘的修形只有在雷达波以较大方位角入射时对减小RCS效果明显;电磁信号遮挡板的存在很大程度上减弱了喷管的电磁信号特征。     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

Dynamic analysis of C/C composite finger seal

A seal device as an important component of aeroengines has decisive influence on per- formance, reliability, and working life of aeroengines. With the development of aeroengines, demands on the performance characteristics of seal devices are made strictly. Finger seal as a novel kind of sealing device, recently attracts more and more attentions in academic circles and engineer- ing fields at home and abroad. Research on finger seals has been extensively developed, especially on leakage and wear performances under dynamic conditions. However, it is a pity that the work on finger seals has been limited with a single approach that is improving the performance by structural optimization; in addition, the technology of dynamic analysis on finger seals is weak. Aiming at the problems mentioned above, a distributed mass equivalent dynamic model of finger seals considering the coupling effect of overlaid laminates is established in the present paper, the dynamic perfor- mance of 2.5 dimension C/C composite finger seal is analyzed with the model, and then the effects of fiber bundle density and fiber bundle preparation direction on finger seal＇s dynamic performance are discussed, as well as compared with those of Co-based alloy finger seal. The current work is about dynamic analysis of finger seals and application of C/C composite in this paper may have much academic significance and many engineering values for improving research level of finger seal dynamics and exploring feasibility of C/C composite being used for finger seals.     

基于疲劳-蠕变载荷等效转换的涡轮盘载荷谱编制及寿命预测

针对雨流计数法在峰谷值提取时进行等值压缩,忽略保载时间的问题进行了改进,提出了一种基于损伤曲线的疲劳-蠕变载荷等效转换方法。利用非线性疲劳损伤累积函数和损伤等效原则,建立了不同应力水平、不同保载时间下疲劳-蠕变载荷与疲劳载荷之间的等效换算模型。利用涡轮盘材料试验数据,计算了不同循环加载条件下的等效换算比,得到了其随保载时间的变化规律。利用改进的雨流计数法,编制了航空发动机高压涡轮盘载荷谱,并将其与寿命-时间分数预测法相结合,得到了涡轮盘剩余寿命。结果表明,改进的雨流计数法综合考虑了疲劳-蠕变耦合损伤对涡轮盘寿命造成的影响,相比于传统雨流计数法,寿命预测误差降低了15.02%,验证了该方法的有效性。     

复合材料胶粘修复界面的载荷传递仿真优化

胶接修复工艺是飞机结构修理的重要工艺之一,为了研究胶黏工艺对修复效果的影响规律,探索最佳的工艺参数,本文建立胶粘修复的三维模型,利用ANSYS Workbench有限元软件对胶粘修复界面载荷传递进行分析,讨论补片材料、补片厚度、胶层剪切模量和胶层厚度对胶接修复的影响。仿真结果证明补片材料为硼/环氧树脂时,胶粘失效风险最小;补片较厚时,胶接修复效果好,但补片过厚会削弱胶接修复的效果;胶黏剂剪切模量越大越有助于损伤区域的修复,工程应用中建议选用剪切模量较高的胶黏剂;胶层较厚时会增大胶层发生缺陷的概率从而减弱修复效果,建议合理选取厚度较小的胶层。最后提出修复界面的表面处理、复合材料端部的溢胶以及倒角处理均有益于修复结构的载荷传递,缓和胶粘界面应力水平,降低胶层失效的风险。