Influence of thickness and initial groove angle in M–K model on limit strain of 7B04 by considering through-thickness stress

Marciniack–Kuczinski (M–K) model is widely used to predict material’s forming limit curve (FLC). The prediction of FLC traditionally neglected through-thickness normal stress. However, it cannot be neglected in some forming processes. Much work has been done to study the effect of through-thickness normal stress on FLC with constant through-thickness normal stress or constant ratio of through-thickness normal stress and maximum principal stress. In addition, based on Nakazima test process, the ratio of through-thickness normal stress and maximum principal stress has been derived, which was a function of instantaneous thickness and loading path. Here, initial groove angle in M–K model was not considered. In this paper, uniaxial tension tests and Nakazima tests were performed on 7B04 aluminum alloy. Based on Hill 48 yield criterion and M–K model, the prediction model of FLC was established. The increase of thickness can enhance FLC. Meanwhile, it is necessary to consider through-thickness normal stress and initial groove angle in prediction model. On the left side of FLC, the effect of initial groove angle on FLC is weakened by increasing sheet thickness. On the right side of FLC, the effect of initial groove angle on FLC is strengthened by increasing sheet thickness. On the right side of FLC, the relation between limit strain points with different thicknesses is linear under one certain loading path. Thickness has decisive effect on through-thickness normal stress level and the changing trendy of through-thickness normal stress during calculation is different under different stress condition.     

弹道交班自适应算法研究

为实现复合制导不同制导弹道的平滑过渡,用二阶吻合法设计了一不同制导律间的指令交接导引段。建立了自适应弹道交接导引算法的模型。理论分析和仿真结果表明,该算法具较好的弹道过载平滑能力,有一定的应用价值。     

Tunnel/predictor display with two-axis control coordination and simplification

A longitudinal-lateral control coordination and simplification concept is considered for a tunnel/predictor display, which presents the command flight path and a specified future aircraft position in a 3-dimensional format to the pilot, for improving flight path control. A basic element of the proposed concept is the generation of common longitudinal-lateral transfer characteristics of the predictor-aircraft system for the crossover frequency region. Control coordination is supported by a dynamics similarity between the longitudinal and the lateral response characteristics of the predictor position in closed-loop pilot control actions. The control coordination and simplification concept is considered to support the pilot in manual flight path control, directed at an enhancement of his control performance and at a reduction of his workload. Results from pilot-in-the-loop simulation experiments support the theoretical findings and show the effectiveness of the proposed predictor concept with control coordination.     

鲁棒变结构制导规律研究

研究存在相对速度测量噪声时的鲁棒制导问题，根据一类变结构制导规律，分析了相对速度测量噪声、制导参数对导引收敛性的影响，以弹道收敛为准则，给出了实现鲁棒制导的条件，研究结果对设计先进的雷达制导系统具有重要意义。     

非线性条件下编队卫星周期性相对运动条件

利用编队卫星机械能守恒原理，提出了非线性条件下求解编队卫星周期性相对运动条件的新方法，给出了非线性周期相对运动的初始条件。编队卫星相对距离较近时，利用非线性周期运动条件，可修正Hill方程的初始条件，抑制编队卫星的长期漂移。编队卫星相对距离较大，非线性因素不可忽略时，利用非线性周期运动条件，可找到不需消耗任何燃料的周期性相对运动轨道。最后的数值仿真结果验证了该方法的正确性。     

一种用于导弹末制导的线性化控制方法

针对包含未知参数的导弹运动非线性模型,提出了一种用于末制导的线性化反馈简化控制方法。在模型中引入附加加速度输出,通过消除内反馈和零极点以输入-输出的近似线性控制导弹的非线性运动。给出了控制模型及其构成。仿真结果表明,该方法的反应速度快、稳定性好,控制精度满足要求,可用于导弹跟踪飞行控制。     

适用于大距离拦截问题的零控脱靶量计算方法

对于中制导后具有较长滑行距离的大气层外拦截问题，为了精确确定零控脱靶量，两飞行器间的重力差必须被合理考虑。利用牛顿二项式定理及现代控制理论推导了两飞行器间相对运动状态解析表达式，并利用牛顿迭代法计算零控脱靶量发生时刻，最后得出一种快速而又具有较高精度的预测零控脱靶量改进方法。为验证预测方法的精度，介绍了几种常见的零控脱靶量计算方法并进行了数学仿真，仿真结果表明改进的ZEM预测方法具有明显的应用优势。     

最优捷联中制导规律的研究

对中远程战术导弹的捷联复合制导的中制导系统进行了分析和研究。建立了目标－导弹相对运动和弹体及自动驾驶仪的数学模型。基于这一模型，应用最优控制理论，设计了考虑弹体及自动驾驶仪的惯性为三阶控制对象捍的最优制指令。     

非线性系统的高阶线性化方法及其在二阶摄动制导中的应用

本文讨论了非线性系统相对于标称轨道的高阶线性化方法。文中在一阶线性展开的基础上,提出了高阶误差项的补偿方法,导出了计算二阶补偿项系数的线性方程组,并给出了补偿项的计算公式。然后,采用所得方法研究了飞行器的二阶摄动制导方法。     

机动再入飞行器的复合制导方案研究

对机动再入飞行器弧段的复合制导方案进行了研究，首先提出了通过高低空复合制导控制再入飞行器的终端速度和弹道倾角的思路；然后分别给出了高空最优制导律和大气厚再入最优制导律；最后对此复合制导方案进行了数字仿真。仿真结果表明此方案在理论上是可行的。