某起落架正常收／放系统失效原因分析

正确运用246雷达天线“正常或应急”液压操纵开关和液压马达壳体回油“正常或应急”开关的工作状态，关系到飞机液压操纵系统的安全性。若天线液压操纵开关和马达壳体回油开关配合不当，将引起飞机液压操纵系统失效。     

Motion synchronization in a dual redundant HA/EHA system by using a hybrid integrated intelligent control design

This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance.     

液压泵脉动模型的故障诊断方法研究

采用液压泵的脉动参数方法进行故障诊断试验研究,在介绍了必要的数学模型和参数测量原理后,着重定性分析了液压泵游隙故障下泵源脉动参数Ｑｓ,Ｚｓ的变化,并给出了判断此种故障的参考阈值方法,试验表明本方法在液压故障诊断方面具有的应用前景。     

民用飞机发动机反推力装置作动系统的应用研究

首先对民用飞机发动机反推力装置的出现、作用、工作原理以及最新的发展趋势进行了简要而系统的阐述。对液压反推力装置作动系统和电反推力装置作动系统的构架和控制原理进行权衡分析,阐述了其在研制中应该注意的问题和考虑的因素,并对今后工作的开展提出了意见。     

A practical nonlinear robust control approach of electro-hydraulic load simulator

This paper studies a nonlinear robust control algorithm of the electro-hydraulic load simulator （EHLS）. The tracking performance of the EHLS is mainly limited by the actuator＇s motion disturbance, flow nonlinearity, and friction, etc. The developed controller is developed based on the nonlinear motion loading model. The problems of the actuator＇s disturbance and flow nonlinearity are considered. To address the friction problem, the friction model of the loading motor is identified experimentally. The friction disturbance is compensated using the obtained friction model. Therefore, this paper considers the main three factors comprehensively. The developed algorithm is easy to apply since the controller can be obtained just with one step back-stepping design. The stability of the developed algorithm is proven via Lyapunov analysis. Both co-simulation and experiments are performed to verify the effectiveness of this method.     

Review on signal-by-wire and power-by-wire actuation for more electric aircraft

The huge and rapid progress in electric drives offers new opportunities to improve the performances of aircraft at all levels:fuel burn,environmental footprint,safety,integration and production,serviceability,and maintainability.Actuation for safety-critical applications like flight-controls,landing gears,and even engines is one of the major consumers of non-propulsive power.Conventional actuation with centralized hydraulic power generation and distribution and control of power by throttling has been well established for decades,but offers a limited potential of evolution.In this context,electric drives become more and more attractive to remove the natural drawbacks of conventional actuation and to offer new opportunities for improving performance.This paper takes the stock,at both the signal and power levels,of the evolution of actuation for safety-critical applications in aerospace.It focuses on the recent advances and the remaining chal lenges to be taken toward full electrical actuation for commercial and military aircraft,helicopters,and launchers.It logically starts by emphasizing the specificity of safety-critical actuation for aero space.The following section addresses in details the evolution of aerospace actuation from mechanically-signaled and hydraulically-supplied to all electric,with special emphasis on research and development programs and on solutions entered into service.Finally,the last section reviews the challenges to be taken to generalize the use of all-electric actuators for future aircraft programs.     

A novel integrated self-powered brake system for more electric aircraft

Traditional hydraulic brake systems require a complex system of pipelines between an aircraft engine driven pump (EDP) and brake actuators, which increases the weight of the aircraft and may even cause serious vibration and leakage problems. In order to improve the reliability and safety of more electric aircraft (MEA), this paper proposes a new integrated self-powered brake system (ISBS) for MEA. It uses a hydraulic pump geared to the main wheel to recover a small part of the kinetic energy of a landing aircraft. The recovered energy then serves as the hydraulic power supply for brake actuators. It does not require additional hydraulic source, thus removing the pipelines between an EDP and brake actuators. In addition, its self-powered characteristic makes it possible to brake as usual even in an emergency situation when the airborne power is lost. This paper introduces the working principle of the ISBS and presents a prototype. The mathematical models of a taxiing aircraft and the ISBS are established. A feedback linearization control algorithm is designed to fulfill the anti-skid control. Simulations are carried out to verify the feasibility of the ISBS, and experiments are conducted on a ground inertia brake test bench. The ISBS presents a good performance and provides a new potential solution in the field of brake systems for MEA.     

N5B燃油系统试验转台计算机控制系统设计

对N5B燃油系统试验台的台架转动角度控制系统建立进行设计分析,介绍了试验台架的结构方式与运转驱动形式、控制系统组成、计算机控制算法设计,以及在实际应用中,为改善控制品质所采用硬件的改进方法。     

多轴液压联动实时插补控制算法

分析了液压系统位置控制的特点和难点,研究了多轴液压联动控制时运动轨迹滞后大、速度不平稳等问题,采用设置主、从变量并对主变量预估的方法,提出了多轴液压联动运动轨迹的实时插补控制算法,并进行了算法的误差分析,给出了算法编程实现的具体步骤。     

凸缘外周带压力的充液拉延工艺的研究

本文论述了一种凸缘外周带压力的充液拉延方法，试验表明，在合适的工艺参数下，采用这种成形方法，可以获得比常规钢模拉延小得多的拉延系数。