制造误差对气体静压轴承涡流力矩影响分析方法研究

 采用有限元方法研究了制造误差对狭缝节流气体静压轴颈—止推轴承的涡流力矩的影响。对于轴颈—止推相连结构的气体轴承,通过相容变换进行统一编程计算;在离散化过程中,利用加权余量法将二阶偏微分方程降低一阶,放松了对插值函数连续度的要求,便于借助有限元技术分析狭缝节流气体静压轴承的流场参数。分析了狭缝气膜宽度误差和轴颈圆度误差对涡流力矩的影响,以及轴颈的不同安装角度、偏心等因素对涡流力矩的影响。经对比验证,有限元计算结果与实测结果基本一致,研究结果对于气体静压轴颈—止推轴承的设计、装配优化和性能预测有重要指导意义。     

承力操纵装置性能试验台系统方案设计

介绍了一个飞机承力操纵装置性能试验台的实现机理、采用的方案,有助于增加读者对液压系统、液压性能试验台及液压伺服控制系统的了解。     

侧压式进气道内部阻力分析

针对目前对超燃冲压发动机阻力特性的需要,以侧压式进气道为例,分别以内壁面和捕获流管为分析体,对其内部阻力进行分类;以数值模拟为手段,给出了总阻力的大小及各项阻力的分配比例,并分析了进气道几何参数变化对阻力的影响关系。     

低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

离子束辅助沉积WS_2-Ti-Ag复合薄膜的摩擦性能

采用ZDH-100型号离子束复合沉积设备沉积WS_2-Ti-Ag复合薄膜,基材为轴承钢和单晶硅(100).采用场发射扫描电子显微镜、XRD衍射仪,检测复合薄膜的表面形貌、微观结构.采用球-盘式摩擦磨损试验机,对复合薄膜在大气环境中的摩擦性能进行了研究.结果表明:采用离子束辅助沉积技术制备的WS_2-Ti-Ag复合薄膜是非晶态薄膜;并且随法向载荷的增加,复合薄膜的摩擦因数减小,摩擦状态越稳定,耐磨寿命越短.     

转子-滚动轴承试验器有限元建模及实验验证

针对自行研制的转子-滚动轴承试验器,在Pro/E中建立了单盘转子的三维实体模型。通过Pro/E与ANSYS的无缝连接技术,在ANSYS中得到单盘转子的三维有限元模型,采用Sol-id185实体单元进行网格划分并采用Subspace法得到了前4阶固有频率和振型。利用锤击法对转子试验器进行了实验模态分析,并与ANSYS模态分析结果进行了对比。结果表明,基于ANSYS的计算模态和实验模态达到了很好的一致性。同时,利用ANSYS分析了陀螺力矩对临界转速的影响。最后,利用修改后的有限元模型仿真计算了不平衡动力响应,与相同条件下的实验结果比较表明,所建立的有限元模型能够准确模拟实际转子-滚动轴承试验器的动力学行为。     

Surface Roughness Effects on Vortex Torque of Air Supported Gyroscope

In order to improve the drift precision of air supported gyroscope, effects of surface roughness magnitude and direction on vortex torque of air supported gyroscope are studied. Based on Christensen’s rough surface stochastic model and consistency transformation method, Reynolds equation of air supported gyroscope containing surface roughness information is established. Also effects of mathematical models of main machining errors on vortex torque are established. By using finite element method, the Reynolds equation is solved numerically and the vortex torque in the presence of machining errors and surface roughness is calculated. The results show that surface roughness of slit has a significant effect on vortex torque. Transverse surface roughness makes vortex torque greater, while longitudinal surface roughness makes vortex torque smaller. The maximal difference approaches 11.4% during the range analyzed in this article. However surface roughness of journal influences vortex torque insignificantly. The research is of great significance for designing and manufacturing air supported gyroscope and predicting its performance.     

高摩擦性能碳／碳复合材料的微观结构

使用激光拉曼探针和电子显微术对试样的断裂面和薄膜样品观察及电子衍射技术研究了两种抗摩擦性能相差悬殊的碳／碳复合材料的微观结构，发现两种材料的微观结构在石墨晶体的结晶结构完整性和取得性以及纤维和基体间的界面行为上有显著差异。