排序方式: 共有7条查询结果,搜索用时 0 毫秒
1
1.
针对传递对准中机翼挠曲变形建模方法适用性差的问题,提出了一种基于有限元分析的不同挂点处弹载子惯导系统的机翼挠曲变形建模方法。以柔性较大的大展弦比机翼为研究对象,建立了薄蒙皮、双翼梁、多肋板式机翼模型。通过绕流分析得到的机翼上、下表面压力分布云图,在此基础上对机翼结构进行气动载荷的加载。根据ANSYS瞬态动力学分析,获取了机翼挠曲变形角的随机过程序列,并利用AR(n)模型代替ARMA(p,q)模型进行建模。采用一种改良卡尔曼滤波算法对模型参数进行估计,并利用信息准则对模型的适应性进行检验。根据参数辨识的结果,最终得到了机翼的挠曲变形模型。 相似文献
2.
3.
余惠琴%陈长乐%邹武 《宇航材料工艺》2002,32(4):36-40
在采用“化学气相沉积和液相浸渍有机物先驱体”混合工艺制备C/C-SiC复合材料的基础上,在陶瓷先驱体中分别添加B,Cr填料,制备多组元材料,并分析添加剂B,Cr对C/C-SiC复合材料性能的影响。研究结果表明,添加剂Cr能提高复合材料的弯曲强度约40%,但抗氧化性能和抗烧蚀性能却有所下降;添加剂B不仅能提高复合材料的弯曲强度,且在500℃-1000℃范围内改善了复合材料的抗氧化性能,其抗烧蚀性能也明显提高。 相似文献
4.
5.
6.
以玻璃纤维为原料,采用特殊的三维织造工艺,织制经向剖面为矩形的新型三维夹芯织物。以环氧树脂E-51、9055型固化剂组成树脂基体体系,采用手糊成型工艺将上述机织物复合制成三维织物夹芯复合材料。对高度为10、20及30 mm的三维织物夹芯复合材料的力学性能进行研究,重点分析夹芯层高度对材料压缩与弯曲性能的影响。结果表明:随着夹芯层高度的增加,材料的压缩强度与模量逐渐下降,弯曲强度逐渐上升,弯曲模量逐渐下降,其中纬向弯曲强度明显大于经向。 相似文献
7.
Shi Qinghua 《航空制造技术》2007,(Z1)
The effects of ply orientation angle of composite flexures on stability of hingeless rotor blade system are studied.The composite hingeless rotor blade system is simplified as a hub,a flap flexure and a lag flexure.pitch bearing and main blade.The kinematics formulations are inferred by employing the moderate deflection beam theory.The shear deformation and warping related to torsion are considered.The quasi-steady strip theory with dynamic inflow effects is applied to obtain the aerodynamic loads acting on the blade.Based on these.the set of finite element formulations of a hingeless rotor blade system is worked out.The numerical results show that the ply angle of the composite flexures has great effects on the aeroelastic stability of rotor blade. 相似文献
1