Multi-faults diagnosis of rolling bearings via adaptive customization of flexible analytical wavelet bases

Multi-faults detection is a challenge for rolling bearings due to the mode mixture and coupling of multiple fault features, as well as its easy burying in the complex, non-stationary structural vibrations and strong background noises. In this paper, a method based on the flexible analytical wavelet transform (FAWT) possessing fractional scaling and translation factors is proposed to identify multiple faults occurred in different components of rolling bearings. During the route of the proposed method, the proper FAWT bases are constructed via genetic optimization algorithm (GA) based on maximizing the spectral correlated kurtosis (SCK) which is firstly presented and proved to be efficient and effective in indicating interested fault mode. Via using the customized FAWT bases for each interested fault mode, the original vibration measurements are decomposed into fine frequency subbands, and the sensitive subband which enhances the signal-to-noise ratio (SNR) is selected to exhibit the fault signature on its envelope spectrum. The proposed method is tested via simulated signals, and applied to analyze the experimental vibration measurements from the running roller bearings subjected to outrace, inner-race and roller defects. The analysis results validate the effectiveness of the proposed method in identifying multi-faults occurred in different components of rolling bearings.     

Fault mode probability factor based fault-tolerant control for dissimilar redundant actuation system

This paper presents a Fault Mode Probability Factor (FMPF) based Fault-Tolerant Control (FTC) strategy for multiple faults of Dissimilar Redundant Actuation System (DRAS) composed of Hydraulic Actuator (HA) and Electro-Hydrostatic Actuator (EHA). The long-term service and severe working conditions can result in multiple gradual faults which can ultimately degrade the system performance, resulting in the system model drift into the fault state characterized with parameter uncertainty. The paper proposes to address this problem by using the historical statistics of the multiple gradual faults and the proposed FMPF to amend the system model with parameter uncertainty. To balance the system model precision and computation time, a Moving Window (MW) method is used to determine the applied historical statistics. The FMPF based FTC strategy is developed for the amended system model where the system estimation and Linear Quadratic Regulator (LQR) are updated at the end of system sampling period. The simulations of DRAS system subjected to multiple faults have been performed and the results indicate the effectiveness of the proposed approach.     

基于磁场映像的印制电路板故障诊断方法研究

简要分析了印制电路板的电磁场，提出了用电磁感应法测量磁场的电咱故障诊断新方法，并给出了测试系统组成方案。最后通过验证实验证明了该方法是确实可行的。     

纵向短周期模态试飞方法和选择

对几种纵向短周期模态试飞方法及其适用性进行了初步分析。结合实际飞行经验,提出了初步判断飞机短周期特性及选择试飞方法。     

基于模糊粗糙集的飞机远程故障诊断模型研究

粗糙集和模糊集结合在飞机故障诊断领域有巨大的发展潜力。针对当前飞机故障诊断中所存在的问题,借助C/S模式,将粗糙集和模糊集结合,提出一种新型的飞机远程故障诊断模型,并且开发出远程诊断系统框架。系统的可行性和有效性得到了飞机故障诊断实例的证实。该系统具有客户端响应快、系统效率高、诊断及时的特点,对于当前民用飞机远程故障诊断具有重要应用价值。     

飞行器振动智能分析与诊断

本文通过综合多个领域知识，引进功能特征描述概念，运用证据理论，提出了对飞行器等复杂系统进行分析诊断的一个新方法并初步完成了专家系统原型，通过具体实例，再现了故障现象     

动态差压检测系统的共模误差研究

主要针对以差压变送器为核心的动态差压检测系统的特点 ,应用流体网络分析方法 ,提出了动态差压检测系统中的共模误差问题。理论分析和仿真计算结果表明 :共模误差与检测系统两侧引压管路的不一致性直接相关 ,为了获得动态差压信号的准确检测 ,必须对动态差压检测系统的共模误差予以抑制     

正—反激组合式变换器与单端式变换器的比较

以５０Ｗ变换器为例，分别从磁性元件的大小，功率管上的电应力、磁恢复问题，输出纹波及输出特性等方面，详细分析比较了组合式变换器与单端式变换器的优缺点，并给出了具体数据，提出了正－反激组合式变换器具有电压应力低，磁性元件小，体积小，重量轻，输出纹波小及可靠性高的结论。     

自动驾驶仪可靠性设计的故障树分析

以地空导弹自动驾驶仪系统可靠性的故障树分析（ＦＴＡ）为例，建立了故障树、结构函数，并进行了系统可靠度计算。实践表明，本方法具有通用性，也可用于其他弹上设备的故障树分析。     

导弹电液伺服机构的模糊滑模变结构跟踪控制研究

为减小导弹电液伺服机构滑模变结构跟踪控制中的抖振,研究了一种模糊滑模变结构控制(FS-MVSC)方法。给出了模糊滑模控制器的构成,以及模糊化、模糊规则与推理、反模糊化处理的方法。在保持系统对参数变化和外干扰不确定强鲁棒性的同时,可使系统具有较优的动态响应和稳态控制精度。仿真结果表明,该控制方案有效。