同轴探针对称激励矩形波导模式谱图研究

通过理论分析证明，同轴探针对称激励矩形波导时，其模式谱图中不存在引起合成场结构不对称的高次模TE20及TE01模。应用分式线性变换检测法进行了对比测试，验证了理论分析结果的正确性。对聚四氟乙烯样品，在7—16GHz频带内测量其复介电常数均有较高的测量精度。实验表明，在一定条件下，标准三公分波导工作频率可高达16GHz，如果取波导宽窄边比r=3，工作频率可达19GHz。所得结果对于微波材料宽带测量具有实用价值。     

畸变进气下压气机叶片非定常载荷的数值模拟

为了分析畸变进气在轴流压气机转子叶片表面产生的非定常激振力，采用二维无粘线化非定常流理论，建立了周期性气流条件下叶片表面非定常气动力的计算模型，根据实测的畸变实验数据，对某发动机的第一级叶片表面非定激振力进行了计算分析，结果表明在叶片的不同径向位置，非定常压力的分布规律不完全相似，而作用在叶片表面总的非定常气动力在叶尖部位最强。     

Flight Flutter Modal Parameters Identification with Atmospheric Turbulence Excitation Based on Wavelet Transformation

针对基于大气紊流激励的飞机颤振试验数据具有信噪比低以及测量数据以加速度响应形式给出等特点,将小波变换与随机减量法相结合对飞机颤振模态参数进行识别,首先利用随机减量法获得结构在非零初始加速度条件下的自由衰减响应,然后对该自由衰减响应进行Morlet连续小波变换,为使变换简单,本文采用了Parseval定理和留数定理,利用Morlet的带通滤波特性,通过搜索小波变换系数在不同的尺度区域内的极大值,再根据小波变换系数的极大值、相角与固有振动频率及阻尼系数间的关系,即可识别出各模态参数。并对利用小波变换识别颤振模态参数时,实现模态解耦应满足的条件进行了分析研究。通过仿真和飞机颤振试验数据分析,验证了该识别方法不仅简单、有效和可行,而且具有较强的抗噪性。     

火箭发动机激励检测铁路桥墩的研究

论述了把火箭发动机作为激励源对铁路桥梁桥墩施加动载荷以检测和评估桥梁桥墩质量的研究情况，给出了有关的实验和测量结果。     

Investigation of longitudinal aerodynamic parameters identification method for fly-by-wire passenger airliners

The flight control system of a fly-by-wire （FBW） passenger airliner with a complex frame-work and high feedback gain augmentation would change the original characteristic of a loaded signal and suppress the excitation of an airplane＇s pertinent motion modes. Taking a research example of an FBW passenger airliner model with longitudinal relaxed-static-stability, a new method of signal type selection and signal parameter design is proposed, through analysis of signal energy distribution and plane body＇s frequency response. According to CCAR60--the Appraisal and Use Regulation of Flight Simulator Device, the simulation validation of the FBW passenger airliner＇s longitudinal aerodynamic parameters identification is put forward. The validation result indicates that the designed signal could excite the longitudinal motion mode of the FBW passenger airliner adequately and the multiparameter comparison in simulation meets the objective test request of CCAR60. Meanwhile, the relative errors of aerodynamic parameters are less than 10%.     

高职院校校外实践教学的探索与研究

通过分析和总结广州民航职业技术学院机务专业校外实践教学的经验，指出了高职院校校外实训教学开展应该注意的问题，提出了改进的措施，以促进学生实践技能的培养和提高，对高职院校开展校外实践教学具有一定的指导意义。     

天线互耦和激励对MIMO—OFDM系统抗干扰性能的影响

在简介MIMO-OFDM系统基本原理的基础上,讨论天线单元的耦合和激励对MIMO-OFDM系统抗干扰性能的影响。采用MVDR波束形成算法,通过仿真例子可以看出,当天线单元实际存在互耦和激励误差时天线的抗干扰性能较理想情况会有所下降,表明要充分保持MIMO-OFDM的抗干扰性能需要考虑互耦效应和激励误差。     

Investigation of lateral-directional aerodynamic parameters identification method for fly-by-wire passenger airliners

A new identification method is proposed to solve the problem of the influence on the loaded excitation signals brought by high feedback gain augmentation in lateral-directional aerodynamic parameters identification of fly-by-wire（FBW） passenger airliners. Taking for example an FBW passenger airliner model with directional relaxed-static-stability, through analysis of its signal energy distribution and airframe frequency response, a new method is proposed for signal type selection, signal parameters design, and the appropriate frequency relationship between the aileron and rudder excitation signals. A simulation validation is presented of the FBW passenger airliner＇s lateral-directional aerodynamic parameters identification. The validation result demonstrates that the designed signal can excite the lateral-directional motion mode of the FBW passenger airliner adequately and persistently. Meanwhile, the relative errors of aerodynamic parameters are less than 5%.     

Correlation analysis of PCB and comparison of test-analysis model reduction methods

The validity of correlation analysis between finite element model（FEM） and modal test data is strongly affected by three factors, i.e., quality of excitation and measurement points in modal test,FEM reduction methods, and correlation check techniques. A new criterion based on modified mode participation（MMP） for choosing the best excitation point is presented. Comparison between this new criterion and mode participation（MP） criterion is made by using Case 1 with a simple printed circuit board（PCB）. The result indicates that this new criterion produces better results. In Case 2, 35 measurement points are selected to perform modal test and correlation analysis while 9 selected in Case 3.System equivalent reduction expansion process（SEREP）, modal assurance criteria（MAC）, coordinate modal assurance criteria（CoMAC）, pseudo orthogonality check（POC） and coordinate orthogonality check（CORTHOG） are used to show the error introduced by modal test in Cases 2 and 3. Case 2 shows that additional errors which cannot be identified by using CoMAC can be found by using CORTHOG.In both Cases 2 and 3, Guyan reduction, improved reduced system（IRS） method, SEREP and Hybrid reduction are compared for accuracy and robustness. The results suggest that the quality of the reduction process is problem dependent. However, the IRS method is an improvement over the Guyan reduction, and the Hybrid reduction is an improvement over the SEREP reduction.     

背压脉动作用下旋转冲压转子进气道流场激励特性

为了获取外界激励作用下旋转冲压转子进气道流场激励特性及性能的变化规律,对旋转冲压转子进气道背压脉动时压缩进气道的内部流场进行了数值仿真,分析了背压脉动时不同脉动频率、不同脉动幅值条件下旋转冲压转子进气道流场的激励特性及性能变化.研究结果表明,背压脉动对旋转冲压转子进气道流场的激励特性及性能具有显著的影响.旋转冲压转子进气道流场激励的非线性特征随着背压脉动频率的增加而增强,却随着背压脉动幅值的增加而减弱.旋转冲压转子进气道性能的稳定性随着背压脉动频率和幅值的减小而增强.