Orbital stability close to asteroid 624 Hektor using the polyhedral model

We investigate the orbital stability close to the unique L4-point Jupiter binary Trojan asteroid 624 Hektor. The gravitational potential of 624 Hektor is calculated using the polyhedron model with observational data of 2038 faces and 1021 vertexes. Previous studies have presented three different density values for 624 Hektor. The equilibrium points in the gravitational potential of 624 Hektor with different density values have been studied in detail. There are five equilibrium points in the gravitational potential of 624 Hektor no matter the density value. The positions, Jacobian, eigenvalues, topological cases, stability, as well as the Hessian matrix of the equilibrium points are investigated. For the three different density values the number, topological cases, and the stability of the equilibrium points with different density values are the same. However, the positions of the equilibrium points vary with the density value of the asteroid 624 Hektor. The outer equilibrium points move away from the asteroid’s mass center when the density increases, and the inner equilibrium point moves close to the asteroid’s mass center when the density increases. There exist unstable periodic orbits near the surface of 624 Hektor. We calculated an orbit near the primary’s equatorial plane of this binary Trojan asteroid; the results indicate that the orbit remains stable after 28.8375?d.     

波纹板成型模数控加工技术

介绍了波纹板成型模数控加工工艺方法及特点，详细论述了数控加工的优点，并结合实例进行工艺方案分析。实践证明，该项加工技术不仅加工质量好，且大大提高了生产效率，降低了生产成本。     

粉末冶金γ-TiAl基合金研究的最新进展

γ TiAl基合金是一种具有发展前途的新一代高温结构材料。首先综述了γ TiAl基合金的性能特点和应用前景 ,并简单介绍了该合金的最新基础研究情况。随后介绍了采用粉末冶金方法制备γ TiAl基合金的基本工艺、力学性能 ,最后结合γ TiAl基合金排气阀和板材的研制论述了粉末冶金在γ TiAl基合金制备及近净成形方面的优势和发展前景     

An equilibrium multi-objective optimum design for non-circular clearance hole of disk with discrete variables

An Equilibrium Multi-objective Optimization Model(EMOM) with self-regulated weighting factors has been proposed for the optimum design of non-circular clearance hole on the front flange of turbine disk. In the ‘‘equilibrium design", both the stress decrease around the hole and the least hole's profile variation are considered, which balances two ambivalent design goals. Specific discrete variables are applied to realize the standardization design in the optimization process, in which a Surrogate Genetic Coding Algorithm(SGCA) is introduced, and a special check module is used to get rid of repeated fitness evaluation of the samples. The method offers an equilibrium design for the non-circular clearance hole of the turbine disk with great accuracy and efficiency.     

Aircraft nonlinear stability analysis and multidimensional stability region estimation under icing conditions

Icing is one of the crucial factors that could pose great threat to flight safety,and thus research on stability and stability region of aircraft safety under icing conditions is significant for control and flight.Nonlinear dynamical equations and models of aerodynamic coefficients of an air craft are set up in this paper to study the stability and stability region of the aircraft under an icing condition.Firstly,the equilibrium points of the iced aircraft system are calculated and analyzed based on the theory of differential equation stability.Secondly,according to the correlation theory about equilibrium points and the stability region,this paper estimates the multidimensional stability region of the aircraft,based on which the stability regions before and after icing are compared.Finally,the results are confirmed by the time history analysis.The results can give a reference for stability analysis and envelope protection of the nonlinear system of an iced aircraft.     

球面收敛调节片喷管RCS数值模拟研究

结合物理光学迭代法(IPO)和等效棱边电磁流法(EEC),自主开发了电大尺寸腔体电磁散射特性计算程序,并通过对某试验模型雷达散射截面积(RCS)进行计算,完成了程序的可靠性验证。利用该程序对带有电磁信号遮挡板且采用3种不同尾缘修形技术的球面收敛调节片矢量喷管(SCFN)进行了RCS数值模拟研究。结果表明:随着入射方位角的增大,喷管的RCS整体上有减小的趋势;喷管尾缘的修形只有在雷达波以较大方位角入射时对减小RCS效果明显;电磁信号遮挡板的存在很大程度上减弱了喷管的电磁信号特征。     

基于输入成形的挠性航天器自适应滑模控制

针对大型挠性航天器姿态机动过程中的振动抑制问题,提出一种输入成形(IS)与自适应滑模控制(ASMC)相结合的控制策略.该控制策略利用输入成形抑制标称挠性系统的残余振动,并通过滑模控制保证实际系统在参数不确定性和外部干扰的影响下实现对标称系统的跟踪,解决了输入成形对参数不确定性和外部干扰的敏感性问题.进一步采用自适应技术去除了滑模切换增益对参数不确定性和干扰上界的先验性要求.仿真结果表明,在参数不确定性和外界干扰的影响下,该控制方法能够保证在完成姿态机动的同时抑制航天器的挠性振动.     

线状阴极数控展成电解加工成形规律的研究

分析了数控展成电解加工成形规律研究的必要性,对展成电解加工进给运动进行分析简化,提出一种在工程中实用的加工间隙计算方法,并对实际求解结果和试验结果进行比较验证,用此研究结果指导数控编程,取得了良好的应用效果     

热处理对激光直接沉积成形A-100钢基体组织及性能的影响

研究了激光直接沉积成形A-100钢沉积态及热处理态组织,通过调整热处理工艺获得激光直接沉积成形A-100钢回火马氏体+回火贝氏体混合基体组织。不同热处理工艺下性能对比结果表明,相比淬火马氏体组织,回火贝氏体+回火马氏体混合组织具有更高的强度,但塑性有所下降。     

非传统激光束激光选区熔化3D打印的研究现状及展望

将非传统激光束激光选区熔化(SLM)作为调研对象,介绍了非传统激光束整形原理及其SLM设备情况,以椭圆高斯光、平顶光、反高斯光和细光斑为分类,总结了不同激光形状类型在生产过程中对制品热历史、微观组织和缺陷的影响.对集成光束整形器件和非传统激光SLM打印研究后发现,椭圆形高斯光打印由于改变了光束椭圆度可使制品在不同部位具...