卫星ATM网络中跨层设计的星上缓存管理优化方案

为提高卫星ATM(异步传递方式)网络星上缓存资源的利用率,针对利用上层协议重传的非实时数据业务,采用跨层设计方法提出了一种缓存管理优化方案—错误信元尾丢弃(ECTD)。它把信道误码引起的错误信元及后续的属于同一协议数据单元的无效信元丢弃。以早分组丢弃为基础,进一步建立了采用ECTD和不采用ECTD的分析有效吞吐量的数学模型。数值分析结果表明,ECTD具有优化缓存管理、提高有效吞吐量的作用,而且信元错误率和协议数据单元的长度越大,ECTD对有效吞吐量的改善就越明显。     

直升机尾桨故障及其试飞研究

介绍了直升机尾桨故障类型及其处理方法和试飞方法。探讨了发动机功率、空速、飞行高度等因素对尾故障试飞的影响。在实际试飞的基础上，给出了正确处理尾桨故障的基本方法，为直升机飞行员在飞行时遇到类似故障后的处理及有关研究人员提供了重要的参考。     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

边条翼布局流场及其双垂尾抖振特性研究

对边条翼双垂尾布局模型的流场进行了激光片光源显示实验研究。实验在西北工业大学NF-3风洞三元实验段进行。实验记录了沿机身轴向从边条到垂尾后缘共8个剖面位置的流动状态。测试迎角范围10°~35°,风速4m/s。通过边条涡流场随迎角的发展和破裂特性与前期双垂尾抖振实验获得的模型垂尾抖振响应特性的对比分析发现:垂尾翼根弯矩、翼尖加速度响应随迎角的变化均与边条涡的发展状态、是否破裂以及破裂程度密切相关。从而得出结论:边条涡破裂是引起边条翼布局双垂尾抖振的主要原因。     

一种利用尾舵偏转实现BWB飞机减速的方法

结合国内外的相关研究工作,提出了一种利用尾舵偏转实现BWB飞机发动机喷气气流方向的改变,进而达到减速目的的方法。基于求解三维欧拉法方程,数值模拟了不同尾舵偏转角度下BWB飞机发动机喷口附近的流场分布特性和反推力大小,并评估了着陆场长收益。气动与性能计算结果表明,在计算滑跑速度范围内,发动机喷气气流会冲击到偏转的尾舵上,进而产生反向喷气气流,并产生较大的反推力,有效降低着陆场长,且随着尾舵偏转角度的增加,反推和减速效果逐渐增大。     

导弹尾部外形对发动机水下点火推力的影响

利用球形气泡模型,通过数值求解研究了导弹尾部对发动机水下点火时推力峰值、尾部压力分布以及推力波动特性的影响.计算结果表明:尾部收敛段半锥顶角的变化对推力峰值影响较大,半锥顶角大于45°时,随着半锥顶角的减小,推力峰值缓慢下降;半锥顶角小于45°时,推力峰值随着半锥顶角的减小而加速下降;半锥顶角对推力达到峰值的时间影响较小;推力达到峰值时尾部收敛段压力分布变化较大;半锥顶角对推力波动特性影响很小.      

尾桨与机体模态耦合动力稳定性研究

本文以工程设计案例对尾桨与机体模态耦合稳定性进行了研究,提出了建模应考虑的因素,研究了机体刚体模态和弹性模态与尾桨耦合产生不稳定性的特点,分析了一些设计参数及气动力对稳定性的影响.从提高稳定性的角度,对设计、分析与试验验证提出了建议.     

直升机尾桨涡环飞行试验研究

根据样机右侧飞的飞行试验,对尾桨涡环现象进行了计算分析;根据右侧飞试验结果,估算出样机悬停回转时尾桨处于涡环状态的偏航角速度范围;将试验结果与国内外的涡环状态判据进行了对比。结果表明,国外的涡环判据不适用于样机的尾桨涡环状态判定,国内的高-辛判据与试验结果一致。     

A Revisit of the Phobos Events

The magnetic field disturbances detected by the Phobos-2 spacecraft in 1989 have been suggested to be caused by a ring of dust and/or gas emitted from the Martian moon, Phobos. The physical nature of these ``Phobos events' is examined using results from related investigations over the last twenty years. It is concluded that there is no clear evidence at present to support the association of magnetic field disturbances in the solar wind with Phobos. The situation will be further clarified taking advantage of the multi-spacecraft observations of the Yinghuo-1(YH-1), Mars Express and MAVEN missions beginning in 2012. It is expected that many novel features of solar wind interaction with Phobos (and possibly also Deimos) itself will also be revealed.      

导弹复合材料立尾的动力特性分析

对Ｈｅｌｌｉｎｇｅｒ－Ｒｅｉｓｓｎｅｒ变分原理进行了详尽论述。依据该变分原理推导了基于折线假设的复合材料层板元素的刚度矩阵，复合材料面板蜂窝夹芯元素的刚度矩阵。在形成元素刚度矩阵时，在子域一极求逆节省大量机时。介绍了动力特性的分析和试验方法。运用Ｈ－Ｒ元素计算了导弹复合材料立尾的动力持性，取得了满意的结果。