A comprehensive survey on the methods of angle of attack measurement and estimation in UAVs

Angle of Attack (AOA) is a crucial parameter which directly affects the aerodynamic forces of an aircraft. The measurement of AOA is required to ensure a safe flight within its designed flight envelop. This paper intends to summarise a comprehensive survey on the measurement techniques and estimation methods for AOA, specifically in Unmanned Aerial Vehicle (UAV) applications. In the case of UAVs, weight constraint plays a major role as far as sensor suites are concerned. This results in selecting a suitable estimation method to extract AOA using the available data from the autopilot. The most feasible and widely employed AOA measurement technique is by using the Multi-Hole Probes (MHPs). The MHP measures the AOA regarding the pressure variations between the ports. Due to the importance of MHP in AOA measurement, the calibration methods for the MHP are also included in this paper. This paper discusses the AOA measurement using virtual AOA sensors, their importance and the operation.     

Manifold structure preservative for hyperspectral target detection

A nonparametric method termed as manifold structure preservative (MSP) is proposed in this paper for hyperspectral target detection. MSP transforms the feature space of data to maximize the separation between target and background signals. Moreover, it minimizes the reconstruction error of targets and preserves the topological structure of data in the projected feature space. MSP does not need to consider any distribution for target and background data. So, it can achieve accurate results in real scenarios due to avoiding unreliable assumptions. The proposed MSP detector is compared to several popular detectors and the experiments on a synthetic data and two real hyperspectral images indicate the superior ability of it in target detection.     

一种应用于超小型无人机的新型定高传感器

使用美国ICSENSOR公司的压阻硅式绝压传感器，对静压进行测量，并设计出适合超小型无人机使用的新型定高传感器，这种定高传感器具有灵敏度高，重量轻，单电源供电，板式结构。可靠性高，重复性好的特点，填补了应用于超小型无人机的定高传感器产品的空白。     

IL-E2线阵遥感相机的研制和TDI分析

针对低照度、高速物体测量等应用场合,介绍了一款高灵敏度的线阵相机的研制方案,相机的线阵CCD芯片采用DALSA公司的IL-E2 ,它具有96级TDI功能,灵敏度比一般的线阵CCD相机提高了约20倍,大幅度提高了相机的整体响应水平,通过试验,得出结论,TDI性能的良好发挥必需依靠图像与TDI数据流精确的同步,即使10%的失步也会造成相机灵敏度的严重退化,因此在精确控制像速度的情况下,更适合作为一款遥感相机来使用.     

基于磁场映像的印制电路板故障诊断方法研究

简要分析了印制电路板的电磁场，提出了用电磁感应法测量磁场的电咱故障诊断新方法，并给出了测试系统组成方案。最后通过验证实验证明了该方法是确实可行的。     

光敏元件与光传感器的市场动态和发展

介绍了光敏元件与光传感器技术的发展及在国民经济和军事领域中的重要怍用；分析了国内外光电子产业的市场动态与发展趋势；论述了我国光电子产业面临的机遇和挑战。     

航天遥感仪器的反射镜轻量化的研究

反射镜轻量化是航天遥感仪器轻型化的重要技术途径之一。阐述了反射镜轻量化的意义,反射镜材料的选择,玻璃反射镜轻量化的结构型式和设计要求、设计方案和计算以及温度试验结果。     

星载遥感器在模拟空间环境中辐射定标设备研制

文章简述了星载遥感器辐射定标设备的研制过程及其在模拟空间环境中的调试过程,试验证明了该设备设计的合理性。     

逆合成孔径雷达信号处理方法研究进展

在简要评述国内外现有的逆合成孔径雷达（ISAR）信号处理的运动补偿和成象方法之后，介绍了南京航空航天大学ISAR课题组近年来在ISAR信号处理方法研究中取得的主要进展，包括基于多散射点定位观点的雷达成象观测模型，基于最大似然原理的同时运动补偿和成象方法，基于最大似然原理的多目标成象方法和基于时频分析的多目标成象方法，以及超分辩成象方法，文末指出了在ISAR信号处理方面有待进一步研究的问题。     

摆动扫描地球敏感器数学模型及飞行试验结果

描述了东方红三号卫星(DFH-3)控制系统设计和数学仿真中采用的摆动扫描地球敏感器IRES-01的数学模型，东方红三号卫星近三年飞行试验结果与数学仿真结果基本一致，证明数学模型是正确的。