A survey of safety separation management and collision avoidance approaches of civil UAS operating in integration national airspace system

Recent years have witnessed a booming of the industry of civil Unmanned Aircraft System (UAS). As an emerging industry, the UAS industry has been attracting great attention from governments of all countries and the aviation industry. UAS are highly digitalized, informationized, and intelligent; therefore, their integration into the national airspace system has become an important trend in the development of civil aviation. However, the complexity of UAS operation poses great challenges to the traditional aviation regulatory system and technical means. How to prevent collisions between UASs and between UAS and manned aircraft to achieve safe and efficient operation in the integrated operating airspace has become a common challenge for industry and academia around the world. In recent years, the international community has carried out a great amount of work and experiments in the air traffic management of UAS and some of the key technologies. This paper attempts to make a review of the UAS separation management and key technologies in collision avoidance in the integrated airspace, mainly focusing on the current situation of UAS Traffic Management (UTM), safety separation standards, detection system, collision risk prediction, collision avoidance, safety risk assessment, etc., as well as an analysis of the bottlenecks that the current researches encountered and their development trends, so as to provide some insights and references for further research in this regard. Finally, this paper makes a further summary of some of the research highlights and challenges.     

An innovative approach for integrated airline network and aircraft family optimization

The determination of optimal aerial transport networks and their associated flight frequencies is crucial for the strategic planning of airlines, as well as for carrying out market research, to establish target markets, and for aircraft and crew rostering. In addition, optimum airplane types for the selected networks are crucial to improve revenue and to provide reduced operating costs. The present study proposes an innovative approach to determine the optimal aerial transport network simultaneously with the determination of the optimum fleet for that network, composed of three types of airplanes (network and vehicle integrated design). The network profit is maximized. The passenger’s demands between the airports are determined via a gravitational model. An embedded linear programming solution is responsible for obtaining potential optimal network configurations. The optimum fleet combination is determined from a database of candidate aircraft designs via genetic algorithm. A truly realistic airplane representation is made possible thanks to accurate surrogate models for engine and aerodynamics is adopted. An accurate engine deck encompassing a compression map and an innovative engine weight calculation besides an aerodynamical artificial neural network module enable a high degree of accuracy for the mission analysis. The proposed methodology is applied to obtain the optimum network comprised of twenty main Brazilian airports and corresponding fleet.     

战术导弹折叠翼快速展开性能的测试技术

介绍某些战术导弹折叠翼快速展开特性测试技术。详细地介绍了测量方法、项目、数据处理和主要结果。试验是在北京空气动力研究所一座低速风洞中进行的。试验结果表明，获得的数据具有很高精度和可靠性，重复性也是令人满意的。     

一种基于多点测距信息的复合制导方法

分析探讨了一种用于提高弹道式导弹对目标命中精度的复合制导方案，提出了通过进行多点测距，利用状态转移矩阵方法，来估计导弹落点偏差和末修级起控点飞行状态参数，然后再按照需要的速度进行末修级导引控制的复合制导方案，并通过仿真计算分析论证了该方法的可行性。     

质量矩导弹的神经网络及自适应非线性控制

本文对质量矩控制导弹的动力学方程简化和控制系统的设计进行了研究。详细阐述了所提出的控制方法，介绍了径向基单隐层神经网络进行误差补偿的算法原理，用Lyapunov理论证明了所采用方法的稳定性。在给出了质量矩导弹的六自由度动力学方程和简化后的方程后，用所提出的方法设计控制系统。通过仿真分析，得出了本文所提出的方法具有较好的误差补偿能力的结论。     

弹道导弹中段机动突防研究

针对弹道导弹中段机动突防问题，在瞬时冲量假设下从理论上研究了速度增量大小、方向和机动时刻对零控脱靶量和落点偏差的影响。研究表明：速度增量大小和机动时刻给定时，零控脱靶量随速度增量方向不同存在极小值和极大值，速度增量方向垂直于视线方向时零控脱靶量接近最大，且最大值近似为待飞时间和速度增量大小的乘积；速度增量大小和机动时刻给定时，落点偏差随速度增量方向的不同存在极小值和极大值，极值点对应的速度增量方向可通过解析方法求解，落点偏差极大值与速度增量大小成正比，且机动时刻越晚，落点偏差极大值越小。该研究可为突防方案设计提供理论基础。     

导弹防御系统的弹道导弹突防

根据美国国家导弹防御系统(NMD)的防御特点，提出了弹道导弹突防的以核攻核、近距离攻击和攻击天基信息链，以及饱和式多波次攻击、电磁脉冲弹头、机动发射平台、多弹头和单弹头突防等不同的战略战术，并分析了采用的不同弹头、释放有源或无源干扰物、隐身和反探测、助推段机动，以及旋转导弹和弹头等技术。     

空袭目标威胁评估模型研究

以航路捷径、目标类型、机动特性、到达发射区近界的剩余时间，以及电子干扰为主要影响因素，结合多通道防空武器系统的特点，建立了基于层次分析法和模糊综合决策法的空袭目标威胁评估模型。用层次分析法确定各因素权重，以分段函数的形式给出权重系数。针对一给定的中程防空武器系统，用模糊统计计算各影响因素的隶属函数，并给出了模型的计算流程。仿真结果表明，所设计的模型能较准确地评估来袭目标的危险性，且具有较高的灵敏度。     

毫米波导引头的技术特点

论述了空空导弹毫米波导引头的主要技术特点及其在工程应用中存在的若干问题。着重讨论了空空导弹毫米波导引头较红外和微波导引头在分辨力、反隐身和抗干扰方面的技术优势，并就毫米波导引头在探测与跟踪、大功率器件研制和毫米波器件的精密加工等关键技术问题进行了分析。     

自动驾驶仪可靠性设计的故障树分析

以地空导弹自动驾驶仪系统可靠性的故障树分析（ＦＴＡ）为例，建立了故障树、结构函数，并进行了系统可靠度计算。实践表明，本方法具有通用性，也可用于其他弹上设备的故障树分析。