再入飞行器优化气动布局研究

本文研究了再入飞行器的优化气动布局问题，提出了单目标和多目标、优化设计方法。通过研究分析，指出了具有高机动性能的带翼机动再入飞行器、弯体机动再入飞行器及带翼锥柱裙机动再入飞行器等再入飞行器的几何参数变化规律。该研究对这类再入飞行器的气动布局选型有重要的参考价值。     

叶轮机非定常气动设计的缘线匹配(II)数值研究

缘线匹配通过考虑多叶排叶轮机相邻叶排间前排叶片尾缘线与后排叶片前缘线空间相对位置匹配关系来进一步提升叶轮机性能,有潜力使叶轮机非定常设计走向工程实际。以一单级跨声轴流压气机和一单级轴流透平为例,尝试用基元流动展向积分方法和全优化方法改善其性能,从而示例应用缘线匹配的具体方法及前景。结果表明,缘线匹配为叶轮机非定常设计提供了可操作的自由度。     

Aerodynamics of smart flap under ground effect

Aerodynamic characteristics of two-dimensional smart flap under the ground effect have been assessed by a numerical simulation. In this process, a pressure-based implicit procedure to solve Navier–Stokes equations on a nonorthogonal mesh with collocated finite volume formulation is used. The boundedness criteria for this procedure are determined from the Normalized Variable Diagram (NVD) scheme. The procedure incorporates the k–ε eddy–viscosity turbulence model. Cantilever beam with uniformly varying load with roller support at the free end is considered for the configuration of the smart flap. The method is first validated against experimental data. Then, the algorithm is applied for turbulent aerodynamic flows around airfoil with smart and conventional flaps for different attack angle, flap angle and ground clearance where the results of two flaps are compared. The comparisons show that the quality of the solution is considerable.     

一种基于工程化气动加热算法的天线热防护设计

高超音速气动热仿真技术是提高天线热防护能力的重要支撑之一,为了进一步缩短研制周期和节约成本,本文提出了一种以冷壁热流和壁面恢复焓为输入条件,以MATLAB和CFD联合迭代快速求解高速气流中天线温度场的工程化算法。在利用气动热试验证明仿真结果与实验数据的高一致性后,以该仿真方法对一个高速气动加热时长为500 s的天线实施了防隔热优化设计,根据仿真评估出的导致核心器件温升的主、次要因素,针对性地提出改进措施,最终目标印制板由过往的320℃下降到了142℃,热控效果显著。     

Design and implementation of rigid-flexible coupling for a half-flexible single jack nozzle

The aerodynamic design of a rigid-flexible coupling profile is the decisive factor for the flow-field quality of a supersonic free jet wind tunnel nozzle, and its mechanic dynamic features are the key for engineering implementation of continuous Mach number regulations. To fulfill the requirements of a free jet inlet/engine compatibility test within a wide simulation envelop, both uni-form flow-fields of continuous acceleration and deceleration are necessary. In this paper, the aero-dynamic design methods of an expansion wall and machinery implementation plan for the half-flexible single jack nozzle were researched. The profile control in nozzle flexible plate design was studied with a rigid-flexible coupling method. Design and calculations were performed with the help of numerical simulation. The technique of axial free stretching of the flexible plate was used to improve the matching performance between the designed elasticity profile and the theoretical one, and the rigid-flexible coupling structure was calibrated by wind tunnel tests. Results indicate that the flexible plate aerodynamic design method used here is effective and feasible. Via rigid-flexible coupling design, the flexible plate agrees with the rigid body very well, and continuous Mach number changes can be achieved during the tests. The nozzle’s exit flow-field uniformity meets the requirements of China Military Standard (GJB).     

风挡串流对测力数据的影响及其改进措施

本文研究了风挡串流对三角形机翼飞机模型测力数据的影响。试验结果指出,在风挡具有串流的情况下,正反装模型所获得的纵向测力数据都是错误的,特別是俯仰力矩。为了消除风挡串流对测力数据的影响,应尽力限制串流量,此外建议在测定模型的平均气流偏角和支架干扰量时,上风挡亦带串流,并使其对称于下风挡的串流。经试验证明,这些措施将有助于获得较为可靠的正反装测力数据。     

冲压发动机气膜冷却分析模型

本文建立了冲压发动机燃烧室气膜冷却传热分析程序。根据燃烧室设计的技术要求,从冷却性能角度完成气膜冷却系统的气动性能和传热特性分析,提供冷却结构优化所需的信息。     

翼吊短舱形式发动机安装效应的风洞试验研究

为了确定实际飞行使用条件下,发动机状态变化时,进排气系统损失对飞机气动特性的影响,本文针对翼吊短舱形式的发动机开展了缩比模型风洞试验,分别进行了基本构型与起飞构型下,马赫数0.1、0.15、0.2,攻角0°~15°变化,5种不同发动机状态条件下的风洞试验,通过数据分析,明确了该类型发动机推/阻力划分的基本方法,分析了发动机状态变化时飞机气动特性的改变及修正方法。风洞试验结果表明：发动机状态变化对飞机升阻特性影响明显,飞机设计研发阶段不能仅对短舱通流模型,或单一发动机状态下的动力短舱模型进行损失修正,必须建立合理的推/阻划分体系,对实际使用条件下,发动机状态变化引起的进排气损失进行修正。     

任意偏心率卫星的大气阻力的短周期摄动

通过本文采用的计算方法和CIRA 1972在160～2000公里高度围范的大气密度的分析模型,导出了人造地球卫星大气阻力短周期摄动的一种计算公式,它形式简单,收敛性好,适用于任意偏心率的卫星。     

最优气动力辅助空间拦截和交会

航天器从高轨道向位于低地球圆轨道的靶目标实施拦截或进行交会 ,并用间接求解的直接伴随方法 ,即用D型拉格朗日方法求解其优化问题。拦截条件是指在最终时刻两者的位置相同 ,而交会条件是指不仅位置相同且最终的速度矢量亦相等。文章讨论了最小时间与最小脱靶量 ,或最小时间与最小燃料消耗的复合性能指标 ,以及推力协同机动的优化解。推力协同下 ,对于特定情况 ,如在热流约束边界部分推力弧是奇异的 ,气动力控制是正常的。这种复杂性和奇异问题的求解在拦截和交会问题中都是值得慎重处理的。