现场动平衡技术在生产中的应用

利用美国恩泰克公司提供的DP1500数据采集仪及现场动平衡软件,以实例说明了现场动平衡技术在锅炉引风机、排粉风机、电动机、机泵等转动设备不平衡故障排除中的应用,介绍了不平衡故障的识别方法,揭示出该技术在生产中的实用性、先进性和经济性.     

H-6部件与外挂天平的研制

介绍了H 6部件与外扌圭物测力试验的难点 :一是天平的设计载荷极不匹配 ,如机翼天平的滚转力矩是常规天平的 1 0多倍 ;二是模型尾部是船形尾段。采用常规的支撑方式 ,支杆强度太弱 ,试验不安全 ,同时也不利于多台天平的敷线 ,总体方案采用模型尾部与支杆合为一体的结构形式 ,既保证了试验安全又便于多台天平的敷线。天平设计首先保证试验安全 ,用双电桥提高天平的输出。试验结果表明 :总体试验方案正确 ,天平设计合理 ,支撑刚度好 ,测量精度高。     

XX—Ⅱ平尾六分量天平的研制

本文是国内第一台六分量部件天平的研制总结,文中对此类天平所遇到的一些棘手问题所采取的一些措施及实验结果作了介绍。     

无人驾驶高空侦察机爬升控制方案分析

介绍了无人驾驶高空侦察机（ＵＡＶ）的爬升轨迹控制方案原理，对纵向控制回路进行了详细分析，按简单拉力法进行了飞行性能计算，同时还分析了爬升方案曲线与优化性能轨迹的关系，并对爬升轨迹计算和试飞遥测数据进行了比较。经分析计算与试飞结果表明，对于爬升较缓慢的飞机，本控制方案可实现沿优化性能轨迹上升，并自动转入有利速度巡航。     

串置双五分量天平的研制

本文介绍风洞应变天平中首次研制成功的一台串置双五分量天平。串置双天平由一块钢材制成。O_1天平固定在 O_2天平的受力端。O_2天平既能测量左平尾载荷,又能传递由 O_1天平测量的右平尾载荷。正确分析两台天平的受力传力路线和弹性变形的综合位移量,用严谨的数学公式描述两台天平测量的力和传递的力。对这两种力进行数学分解,形成数学模型,写出天平静校公式的数学表达式,并据此研制天平静校设备,分析天平在各分力作用下的弹性位移,写出弹性角公式。上述各点是串置双天平的核心问题。最后经风洞引导性实验证明,串置双天平的原理、方案、受力分析、静校公式等都是正确的。在国内外,串置双天平第一次用于风洞实验,获得了初步成功。     

土壤槽三分量天平

本文通过实例表明,常规风洞测力天平移植于对沙漠的研究是成功的。设计排除了土壤的自重影响,天平有较高的灵敏度,整机可根据不同土壤槽而升沉,是研究沙粒迁移的较好工具。     

The characteristics of sharp (small-scale) boundaries of solar wind plasma and magnetic field structures

We investigate properties of large (>20%) and sharp (<10 min) solar wind ion flux changes using INTERBALL-1 and WIND plasma and magnetic field measurements from 1996 to 1999. These ion flux changes are the boundaries of small-scale and middle-scale solar wind structures. We describe the behavior of the solar wind velocity, temperature and interplanetary magnetic field (IMF) during these sudden flux changes. Many of the largest ion flux changes occur during periods when the solar wind velocity is nearly constant, so these are mainly plasma density changes. The IMF magnitude and direction changes at these events can be either large or small. For about 55% of the ion flux changes, the sum of the thermal and magnetic pressure are in balance across the boundary. In many of the other cases, the thermal pressure change is significantly more than the magnetic pressure change. We also attempted to classify the types of discontinuities observed.     

直流发电机并联供电平衡性探讨

主要介绍了某型飞机直流发电机并联供电的原理、供电时负载变化对平衡性的影响以及不平衡产生的原因,分析了影响并联供电的一般规律,并结合实际提出了预防不平衡供电的具体措施和建议。。     

“蚌式”进气道附面层扫除特性风洞试验

以某低、高速风洞为平台,设计搭建了“蚌式”进气道附面层扫除特性测量试验系统,进行了不同流量系数和来流马赫数下进气道鼓包表面附面层扫除特性的风洞试验,通过对试验数据的整理、计算和对比分析同型号的飞行试验结果,研究了“蚌式”进气道鼓包表面附面层扫除特性。研究结果表明:在相同的来流马赫数下,随着流量系数的增大,鼓包表面附面层的扫除能力逐渐减弱;在亚声速工况的绝大多数流量范围内,鼓包表面压力系数沿鼓包中心线对称分布、压力梯度变化明显,且在不同截面沿主流方向具有增大的特征,鼓包构型对附面层扫除效果较强;超声速工况下具有明显附面层扫除能力的流量范围明显小于亚声速工况,进气道唇口形成的弓形激波是影响鼓包表面不同位置压力梯度变化的主要因素,进而决定着附面层扫除特性。在接近来流马赫数18及以上飞行工况下,附面层的扫除能力减弱,附面层分离加强,进而会造成较大的进气压力损失和畸变。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.