Far-UVC light as a new tool to reduce microbial burden during spacecraft assembly

This work aims to investigate far-UVC light at 222 nm as a new microbial reduction tool for planetary protection purposes which could potentially be integrated into the spacecraft assembly process. The major advantage of far-UVC (222 nm) compared to traditional germicidal UVC (254 nm) is the potential for application throughout the spacecraft assembly process in the presence of humans without adverse health effects due to the limited penetration of far-UVC light into biological materials. Testing the efficacy of 222-nm light at inactivating hardy bacterial cells and spores isolated from spacecraft and associated surfaces is a necessary step to evaluate this technology. We assessed survival of Bacillus pumilus SAFR-032 and Acinetobacter radioresistens 50v1 exposed to 222-nm light on proxy spacecraft surfaces simulated by drying the bacteria on aluminum coupons. The survival fraction of both bacteria followed a single stage decay function up to 60 mJ/cm², revealing similar susceptibility of both species to 222-nm light, which was independent of the exposure rate. Irradiation with far-UVC light at 222 nm is an effective method to decontaminate the proxy spacecraft materials tested in this study.     

POGO蓄压器变频降幅特性分析

论述纵向耦合振动（POGO）蓄压器的变频降幅特性，指出其主要影响因素是蓄压器容积及连接管路的液阻，根据输送管路的特定频率，选择适当的蓄压器容积，使其固有频率与特定管路的压力脉动频率相一致，可以获得预期的变频降幅效果。给出了蓄压器的变频降幅试验研究结果，可为POGO蓄压器的设计，研制，使得提供参考。     

模型的随机平衡降阶

本文提出了系统在白噪声激励下的一种开环降阶方法—随机平衡降阶法。在系统的随机平衡坐标中，输出性能指标可以表示成一组与系统随机可控／可观格莱姆相关的贡献值的和。根据这组贡献值的大小，可以决定在随机平衡坐标下降阶模型所要保留的状态分量，并从输出误差指标的最优角度出发，对输出矩阵作个修正。最后给出了一个数值仿真例子。     

一种紧固孔细节原始疲劳质量评定方法

 给出了一种由等幅载荷试验的断口金相数据反推得到的当量初始裂纹尺寸额定值（EIFSR）表征的紧固孔原始疲劳质量评定方法。并据此建立了原始疲劳质量符合性检查的EIF-SR判据和寿命判据。最后用上述判据对紧固孔细节进行了原始疲劳质量评定和符合性检查。     

新型固态纳米团簇NaXe在核磁共振中的量子尺寸效应

介绍了从体材料、薄膜(面材料)至量子点材料的发展。讨论了纳米材料中量子尺寸效应的重要意义。在实验中,用Xe离子注入NaCl微晶的方法,获得了尺寸小于80 nm的新型固态纳米团簇NaXe,测得了这种新型纳米材料在核磁共振中化学位移的量子尺寸效应。     

THE RESEARCH OF INCREASING LIFT ANDREDUCING DRAG FOR WING-TIP SAILS

ＴＨＥＲＥＳＥＡＲＣＨＯＦＩＮＣＲＥＡＳＩＮＧＬＩＦＴＡＮＤＲＥＤＵＣＩＮＧＤＲＡＧＦＯＲＷＩＮＧ－ＴＩＰＳＡＩＬＳＣｈｅｎＭｉｎｇｙａｎ，ＱｉＭｅｎｇｂｕ（ＮａｎｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，...     

数字全息测量超高速撞击碎片云实验研究

在中国空气动力研究与发展中心(CARDC)超高速碰撞中心(HIRC)7.6 mm超高速碰撞设备的基础上，搭建纳秒级脉冲激光数字全息系统。提出滤波片和衰减片组合布置，减弱超高速碰撞等离子体自发光、提高信噪比的方法。实验获得了2.25 mm铝球弹丸以4.0 km/s的速度撞击0.5 mm厚铝板形成碎片云的全息图。采用小波变换算法对碎片云全息图进行重建，得到超高速撞击碎片云的三维结构和碎片大小。碎片云的轮廓呈椭球型，分为碎片云的前端、核心和外壳，碎片主要分布在弹丸破碎形成的碎片云核心，存在大碎片，且分布较集中，对后板的损伤也严重     

基于改进准则法的复合壳阻尼结构拓扑减振动力学优化

针对复合壳阻尼结构的拓扑减振优化问题，以约束阻尼层的有限单元为设计变量，采用体积比、模态频率和振型为优化约束条件，构建以多模态权重系数的结构模态损耗因子数值关系为优化目标函数的拓扑减振优化模型。为了拓展优化目标灵敏度具有不局限于某一变密度法插值模型的形式，推导了数值表达式的一般函数式。动力学优化中优化目标灵敏度正、负数集共存，使得非凸性的目标函数设计变量出现负值或优化函数寻优于局部极值点。为此，推导出复合壳阻尼结构的全域灵敏度改进优化准则法迭代格，以确保每次迭代域均为全域设计变量集。结合有限单元法编程实现了复合壳阻尼结构改进准则法，并对复合壳结构进行拓扑减振优化分析。结果表明：在敷设体积减为全覆盖的50%时，复合壳结构的模态损耗因子增减偏差为10%，具有提升减振的轻量化设计目的；各阶目标函数和拓扑构型所需的迭代次数少，中间密度区域较小，多阶优于单阶模态优化函数，易于获得全域寻优的有效减振。     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

地市级政府规模影响因素的实证研究——以河南省为例

政府规模是我国推进行政体制改革、简政放权进程中值得关注的一个重大课题,文章以＂利维坦假说＂和＂瓦格纳法则＂为理论基础,利用河南省1990~2012年的地市级面板数据,通过构建静态面板数据模型和动态面板数据模型,从一个更微观的视角考察了地方政府规模的影响因素。研究发现,财政分权推动了地方政府规模的扩大,＂利维坦假说＂并不成立;而经济发展水平、城镇化率与地方政府规模也呈正相关关系,即＂瓦格纳法则＂是成立的;此外,我们还发现人口规模、产业结构和开放程度也是影响地方政府规模的重要因素。