Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

改性双基低特征信号推进剂研究进展

综述了国外改性双基低特征信号推进剂研究的最新进展，提出了改性双基推进剂实现低特征信号并提高性能的主要技术途径和性能指标，重点介绍了几种含有新型含能材料、新型燃速改良剂和新型键合剂的改性双基低特征信号推进利配方。     

大涡模拟模型环形燃烧室污染特性

在任意曲线坐标系下,采用大涡模拟模型环形燃烧室两相燃烧流场中污染物的生成.用亚网格涡破碎(EBU)燃烧模型估算化学反应速率;分别用NO亚网格动力学模型与CO亚网格模型来模拟NO和CO的生成;采用随机离散模型模拟气液两相湍流流动,两相之间耦合采用PSIC算法.计算结果与瞬态速度场、出口温度和污染物质量分数分布的实验数据比较吻合,表明大涡模拟方法和亚网格模型可以用来预估实际燃烧室两相喷雾燃烧流场和污染物生成过程.      

在非结构动网格上追踪多介质界面的ALE方法

在处理带有介质分界面的多介质流动问题时,把介质边界当作一种特殊的边界,并且在该边界上的点都有着双重的定义,分别对应边界两侧的不同介质状态,通过利用HLLC方法求解任意拉格朗日-欧拉方程(ALE),以及运用界面跟踪和动网格方法分别对一维和二维多介质流进行了数值模拟,并得到了满意的结果.     

Boundary discontinuous Fourier analysis of thick beams with clamped and simply supported edges via CUF

This paper presents an analytical solution for static analysis of thick rectangular beams with different boundary conditions.Carrera's Unified Formulation (CUF) is used in order to consider shear deformation theories of arbitrary order.The novelty of the present work is that a boundary discontinuous Fourier approach is used to consider clamped boundary conditions in the analytical solution,unlike Navier-type solutions which are restricted to simply supported beams.Governing equations are obtained by employing the principle of virtual work.The numerical accuracy of results is ascertained by studying the convergence of the solution and comparing the results to those of a 3D finite element solution.Beams subjected to bending due to a uniform pressure load and subjected to torsion due to opposite linear forces are considered.Overall,accurate results close to those of 3D finite element solutions are obtained,which can be used to validate finite element results or other approximate methods.     

Micro-mechanical model for predicting the elasto-plastic behavior of composites based on secant formulation method

To predict the Elasto-Plastic Behaviors (EPBs) of aligned inclusions reinforced composites, this paper develops an interpolative Mori-Tanaka/Double-Inclusion (MT-DI) homogenization model with the secant formulation, and gives the numerical implementation algorithms of the developed MT-DI model with the secant formulation. The Finite Element (FE) homogenization method is implemented to provide the “exact” EPBs of the composites and thus validate the MT-DI model with the secant formulation. The MT-DI model with the 2nd-order secant formulation is validated to provide the more accurate predictions, while the MT-DI model with the 1st-order secant formulation always gives the stiffer predictions. The results show that using the macro-stress and macro-strain as the inputs, the MT-DI model with the secant formulation gives the identical predictions. The predictions of the MT-DI model with the secant formulation vary between those of the MT and DI models with the secant formulation. Meanwhile, the MT-DI model with the secant formulation does not predict the accurate EPBs for the phases of the composites.     

基于Lagrange方法的航天员舱外活动计算机仿真

在比较各种地面微重力模拟设备的优缺点的基础上，阐述了计算机动态仿真航天员舱外活动(EVA，Extra Vehicular Activity)的必要性。简要的概述了应用计算多刚体系统动力学对EVA进行仿真的步骤。描述了拉格朗日方程在仿真过程中的应用，建立了用于仿真的动力学方程。选取典型的EVA，得出了描述该EVA系统运动的拉格朗日动力学方程。利用反向运动学和反向动力学对该EVA进行了仿真计算，并对结果进行了分析。     

丁羟推进剂粘合剂网络结构调控方法探讨

把扩链剂的使用作为调整丁羟推进剂粘合剂网络及其形态结构的一个重要手段。采用扩链剂、交联剂和真实固化参数(Rt)等综合的方法调控丁羟推进剂性能,可望比单纯控制名义固化参数(Ro)获得更好的力学性能及其稳定性。推导了丁羟推进剂粘合剂系统网络调整的通用计算公式和各种特定条件下的计算公式。     

芳纶复合材料用湿法环氧配方的研究

在综合考虑粘度，力学性能和储存期的基础上，研制了以混合芳香胺为固化剂的芳纶用湿法环氧配方， 注浇体力学与俄，美等国家湿法环配方及我国高性能干法配方性能相当，实验证明该湿法环氧配方与Ｆ－１２纤维浸润性及界面粘接性能均较高，其ＮＯＬ环强度转化率均达８７％。     

A FINITE ELEMENT SOLVER FOR NAVIER-STOKES EQUATIONS VIA VORTICITY AND VELOCITY

INTRODUCTIONThe stationary incompressible Navier- Stokesequations in the primitive variables( velocity uand pressure p)- vΔu + u . u + p =f . u =0u =g　inΩinΩonΓ( 1 )whereΩ is a set of R2 ,Γ its boundary,v thekinematic viscosity of the fluid,f a field of givenbody forces,and g a given field defined onΓ sa-tisfying the global conservation property∫Γg . n =0 ( 2 )n denotes the unit outer normal vector toΓ.The vorticity- velocity system of Eq.( 1 ) ,byintroducing the vorticityω…