Late Stages of Stellar Evolution

A large fraction of ISO observing time was used to study the late stages of stellar evolution. Many molecular and solid state features, including crystalline silicates and the rotational lines of water vapour, were detected for the first time in the spectra of (post-)Asymptotic Giant Branch (AGB) stars. Their analysis has greatly improved our knowledge of stellar atmospheres and circumstellar environments. A surprising number of objects, particularly young planetary nebulae with Wolf-Rayet (WR) central stars, were found to exhibit emission features in their ISO spectra that are characteristic of both oxygen-rich and carbon-rich dust species, while far-IR observations of the PDR around NGC 7027 led to the first detections of the rotational line spectra of CH and CH⁺. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

利用高空科学气球收集宇宙尘粒

本文叙述了高空科学气球上一种自行研制的宇宙尘收集器以及气球吊篮系统。利用该系统进行了五次高空字宙尘粒的收集飞行,简述了对所收集的尘粒进行系统研究的结果。     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

臭氧对羰基铁粉-CSM吸波涂层的影响

进行了改性羰基铁粉-氯磺化聚乙烯(CSM)吸波涂层的臭氧环境暴露试验,并利用SEM、XRD、IR、DSC和TG等方法研究了臭氧对其表面结构和性能的影响。结果表明,臭氧造成CSM表层分解,部分羰基铁粉脱落,但未影响改性羰基铁粉的相组成,对涂层吸波性能的影响不显著。     

机载燃油惰化技术及标准研究

针对目前广泛应用于飞机燃油箱起火和爆炸防护的机载燃油惰化系统,详述了国外机载燃油惰化技术的发展历程,并介绍了国内发展现状,提出影响机载燃油惰化系统设计的关键因素。在此基础上,简述了国内外标准情况,提出了制定我国机载燃油惰化系统标准的建议。     

民机燃油箱防爆闪电防护新适航要求研究

民用飞机燃油箱系统防爆设计是飞机设计的一个重要方面,其中适航对燃油箱系统闪电防护设计要求作为燃油箱防爆设计及验证的一个重要组成部分,历来受到航空工业界及美国联邦航空局(FAA)的普遍关注。通过研究FAA 关于民用飞机燃油箱系统防爆方面闪电防护的最新适航要求,总结了相关条款的变化内容及相应的符合性验证方法,并预判了未来航空工业界由此产生的影响,对民用飞机适航验证有一定借鉴意义。     

月尘环境效应及地面模拟技术

介绍了月球尘的特点及其对探月活动的影响。在分析月球尘环境及其对月面探测器污染、磨损、阻塞、静电效应的基础上,对月球尘环境模拟技术、月球尘扬尘及其运动学和动力学规律、月球尘效应防护及试验评价方法等研究方向和重点提出了一些初步看法。针对研究内容的需求,梳理出一台完整的月球尘地面模拟试验设备应具备真空、温度、太阳风、太阳紫外、月球尘、月面电场、月面磁场等环境因素。在此基础上,设计了一种月球尘地面模拟试验装置方案,并对月球尘环境效应试验方法进行了初步讨论。为月球探测后期任务条件保障建设及相关研究工作提供参考。     

发动机羽流作用下的实时月尘运动仿真

月尘运动是月球探测器软着陆过程中不可或缺的重要环节,针对发动机羽流作用下月尘运动真实感不强和月尘颗粒运动模型过于简单的问题,提出了一种逼真的实时月尘运动仿真方法.通过计算流体动力学(CFD, Computational Fluid Dynamics)和二次谢别德插值(Quadratic Shepard)方法,分析和计算单个月尘颗粒的运动学模型,得到一定初始条件下粒子运动的二维轨迹曲线;通过分析粒子的数量、初始位置、初始速度、生命周期等参数对粒子运动学的影响和变化规律,抽象出月尘系统的粒子集;建立基于月尘粒子集的月尘运动模型.实验结果显示:该运动模型逼真的模拟了发动机羽流作用下月尘腾起、飞溅、弥漫、消散等运动过程,视觉真实感和实时性能良好,对研究真空环境中的月尘运动及月球软着陆等相关领域具有一定的参考意义.目前该方法已应用于北航虚拟现实国家重点实验室月球软着陆仿真系统.     

爆炸冲击波对反舰导弹发动机舱的毁伤效应

为研究爆炸冲击波对来袭反舰导弹发动机舱的毁伤效应,应用ANSYS/LS-DYNA软件,对定量TNT和压装8701炸药爆炸产生的冲击波毁伤不同距离处的反舰导弹发动机舱进行了数值模拟。计算结果表明:爆炸冲击波对导弹发动机舱的毁伤以壳体凹陷为主要形式,对凹陷壳体周围区域几乎没有影响;爆炸冲击波对反舰导弹发动机舱的毁伤效应,随起爆点距离增加而迅速减小,且初期衰减速度明显大于后期。10 kg的装药量、炸点位于3 m处时,TNT和压装8701炸药对反舰导弹发动机舱基本无法造成毁伤。     

惰性块式平面波发生器形成平面波的数值模拟分析

探讨了惰性块式平面波发生器的相关原理,在费马原理的基础上设计了平面波发生器的物理模型,用非线性有限元方法对平面波形成过程进行了数值模拟,得到了不同时刻的波形图像,数值模拟结果与实际过程在物理宏观特征上基本一致。