Implementation of tactical maneuvers with maneuver libraries

This study creates and combines the general maneuver libraries for fixed-wing aircraft to implement tactical maneuvers. First, the generalized maneuver libraries are established by analyzing the characteristics of tactical maneuvers required in battlefields. The 7th order polynomial is applied to both the creation of the maneuver libraries and the generation of the trajectories or flight paths for modal inputs. To track the desired trajectory, we design the Attitude Command Attitude Hold (ACAH) system and the Rate Command Rate Hold (RCRH) system using Model Following Controller (MFC). Moreover, the Line-of-Sight (LOS) guidance law is designed. In particular, the CONDUIT® is employed to optimize the gains so that the control systems meet the aircraft Handling Qualities (HQ) criteria. Finally, flight simulations are performed for the longitudinal loop, immelmann-turn, and climb-slalom-descent maneuvers to verify that tactical aggressive maneuvers are realizable via the combination of maneuver libraries. This study can contribute to the development of flight techniques for aircraft tactical maneuvers and to the revision of air force operational manuals.     

NTC技术在微动同步器标度因数的温度补偿中的应用

了微动同步器结构原理，用数学方法找出了温度对其标度因数产生影响的主要原因，温度对激磁线圈的铜阻有影响，从而最终将影响输出电压的大小，针对这一主要原因，采用ＮＴＣ物理方法进行补偿，取得了很好的实际效果。     

一万氧压机轴振动控制分析与实践

本文介绍了一种非常规的高速轴振动抑制方法，主要是用振源分析技术，通过确诊设备故障原因来分析影响轴振动的主要因素，调节机器的系统刚度，再通过理论计算修订安装参数，制定设备故障处理对策，在涟源钢铁集团有限公司一万氧压机组上的实践取得了相当满意的效果，很有推广价值。     

Numerical Simulation of Impact Loading on Solid Propellant Within an Orthotropic Shell

The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure.     

GPS/速率陀螺组合Kalman滤波姿态确定算法研究

建立了GPS／速率陀螺组合姿态估计系统的模型，研究比较了三种典型的Kalman滤波姿态确定算法：状态扩充法、量测量求差法和时变噪声估计跟踪自适应滤波算法。给出了某航天器采用GPS／速率陀螺组合姿态确定的仿真计算结果，并对结果进行了分析。结果表明，与传统Kalman滤波算法比较，时变噪声跟踪自适应滤波算法和量测量求差滤波算法能较好地消除GPS测量中相关时变噪声的影响，提高姿态确定的精度；而且时变噪声跟踪自适应滤波算法能很好地消除由于噪声统计性能的不确定性对Kalman滤波的影响，提高姿态确定系统的性能。     

距离拖引干扰对几种脉冲雷达的干扰效果分析

借助于雷达信号的模糊函数，分析了距离拖引干扰对非脉压雷达、线性调频脉压雷达和二相编码脉压雷达的干扰效果，且进行了比较，得到了一些有用的结果。     

基于小波分解与分形内插相结合的地形数据压缩方法

地形匹配制导中需要使用大量的地形数据，因此有效的地形数据压缩技术是非常重要的。传统的地形数据压缩方法主要采用线性内插的方法，但这对于地形起伏较大的山区地形失真太大，不能满足高精度导航的要求。本文基于小波分解与分形内插相结合的方法，提出了一种新的地形数据压缩方法，它具有压缩比高，保真性好，解码快的特点，特别适合山区地形数据的压缩。     

图象压缩技术的发展

图象压缩是信息领域发展中的关键技术之一,本文综述了图象压缩技术的发展,论述了各发展阶段的基本压缩原理、特点及主要实用方法的优缺点。对80年代后期新发展的分数维压缩方法的有关概念、方法及现状着重作了论述。分数维图象压缩方法与VLSI技术的结合,将会对未来的遥感、通讯、导航及一切与图象有关的领域产生重大影响。     

考虑二次流影响的压缩系统稳定性模型

利用Ａｄｋｉｎｓ－Ｓｍｉｔｈ二次流模型计算得到转子出口截面落后角沿叶高的变化。在压缩系统稳定性模型中考虑叶尖流面落后的角影响，并提出一个新的时滞参数计算公式，计算结果表明，落后角的大小对压缩系统的稳定性影响很大，同时揭示了叶尖间隙对压缩系统稳定性的影响。