无线指令系统中串口通信的实现

介绍了无线指令系统的工作原理,以及串口通信在该系统中的重要地位.分析了Windows32环境下的串口通信的实现机制和几种实现方法及其编程思路,并以Visual C 6 .0为开发平台,通过调用Win32 API编写了计算机的异步串口通信程序,用汇编语言编写了单片机的通信程序.最后结合无线指令系统实例,实现了PC机串口与单片机之间的数据通信,通信效果良好.     

惯性/星光/卫星组合导航系统可视化仿真研究及实现

组合导航可视化仿真是验证多传感器组合导航方案、算法正确性和可靠性的有效手段,可以通过曲线、图形的方式对多传感器组合导航过程进行三维直观演示。为充分验证所提出的惯性/星光/卫星多传感器组合导航系统的精度和可靠性,本文设计了基于VC++的多传感器组合导航的算法可视化仿真验证系统,采用任务分离技术分配主辅线程实现界面显示和算法运算并行工作,同时利用API函数实现高效、高速的串口传输和界面显示,提高系统的实时性。实验结果表明,本文设计的系统可以满足多传感器组合导航系统可视化仿真演示的需要,运行稳定可靠。     

浅谈Java 2D图象处理技术

本文介绍了Java 2D API的图象处理思想.通过以LookupOp查找表过滤器为例,分析了图象的即时模式模型,即对内存的缓冲区图象进行处理,再绘制到屏幕上的处理技术.同时介绍了利用Java 2D中提供的过滤器对图象数据的过滤操作.     

Ionospheric total electron content response to annular solar eclipse on June 21, 2020

The effects of physical events on the ionosphere structure is an important field of study, especially for navigation and radio communication. The paper presents the spatio-temporal ionospheric TEC response to the recent annular solar eclipse on June 21, 2020, which spans across two continents, Africa and Asia, and 14 countries. This eclipse took place on the same day as the June Solstice. The Global Navigation Satellite System (GNSS) based TEC data of the Global Ionosphere Maps (GIMs), 9 International GNSS Service (IGS) stations and FORMOSAT-7/COSMIC-2 (F7/C2) were utilized to analyze TEC response during the eclipse. The phases of the TEC time series were determined by taking the difference of the observed TEC values on eclipse day from the previous 5-day median TEC values. The results showed clear depletions in the TEC time series on June 21. These decreases were between 1 and 9 TECU (15–60%) depending on the location of IGS stations. The depletions are relatively higher at the stations close to the path of annular eclipse than those farther away. Furthermore, a reduction of about ?10 TECU in the form of an equatorial plasma bubble (EPB) was observed in GIMs at ~20° away from the equator towards northpole, between 08:00–11:00 UT where its maximum phase is located in southeast Japan. Additionally, an overall depletion of ~10% was observed in F7/C2 derived TEC at an altitude of 240 km (hmF2) in all regions affected by the solar eclipse, whereas, significant TEC fluctuations between the altitudes of 100 km ? 140 km were analyzed using the Savitzky-Golay smoothing filter. To prove TEC depletions are not caused by space weather, the variation of the sunspot number (SSN), solar wind (V_SW), disturbance storm-time (Dst), and Kp indices were investigated from 16th to 22nd June. The quiet space weather before and during the solar eclipse proved that the observed depletions in the TEC time series and profiles were caused by the annular solar eclipse.     

满足适航要求的嵌入式操作系统测试方法

以被定义为DO-178C Level A级软件的自主版权嵌入式实时操作系统为应用模型，提出了一种基于DO-178C标准的嵌入式实时操作系统的测试方法。提出的测试模式解决了操作系统内核在目标机中难以测试的问题，同时对操作系统在目标机环境进行测试的一些具体问题给出了解决方案。方法既适合现阶段国军标对软件测试提出的要求，又保证了嵌入式操作系统软件测试活动与适航要求的符合性。     

嵌入式数据库SQLite在Windows程序中的应用

介绍了SQLite 系统的特点和体系结构,数据库应用环境是零配置,可以减少应用程序的体积.阐述了在Windows平台上的应用方法,利用SQLite提供的C语言API函数,完成了Windows平台对SQLite嵌入式数据库系统操作,提出了将Sqlite的源代码直接嵌入到应用程序中的开发方法,对数据库安全提供有效保证.     

适应弯扭隔肋的涡轮叶片转接段建模方法

针对涡轮冷却叶片弯扭冷却通道转接段的特点,提出了关联的转接段建模方法,通过曲线网格法生成工具片体裁剪叶身内型实体得到转接段,并以此为基础完成转接段建模,满足转接段与弯扭隔肋G1光滑转接的要求。详细分析了该方法的原理;提取了关键参数;利用UG(Unigraphics NX)二次开发平台开发了转接段的参数化建模模块,实现了适应弯扭隔肋的转接段建模。     

基于WebGIS和虚拟现实技术的城市旅游信息系统分析与设计

基于WebGIS和360°全景技术,结合西安市的矢量地图和已有的旅游资源,设计了西安市虚拟旅游信息系统的基本框架体系、体系结构,分析了实现旅游信息系统的关键技术,介绍了系统的主要功能,展现了WebGIS和虚拟现实技术相结合构建虚拟旅游信息系统的可行性.应用Google Map API和360度全景技术来构建这一虚拟旅游系统,和传统的构建方式相比,体现出一定的优势性,同时也展望了该项技术在未来旅游市场中的广阔前景.     

基于Socket的网络中间件开发技术

对基于Scoket的网络中间件的开发机理及编程方法作一简要的概述.对使用队列方法解决Socket在同一过程中发送与接收多个消息的方法进行了论述.     

涡轮叶片导管快速建模

导管是涡轮叶片冲击冷却的核心部件。为实现复杂冷却结构叶片导管的快速建模,提出了创成式导管快速建模方法。首先应用截形法构建适应叶片内腔几何形状的管身截面线以创建管身,然后应用截交包络裁剪法与特征等弧长阵列方法保证了导管冲击孔与导管突起的建模稳定性与建模效率,并构建了突起定位迭代公式,保证了导管与叶片内腔的配合精度。最后采用UG Open API工具开发了导管快速建模程序,验证了所提方法的可行性。