Late Stages of Stellar Evolution

A large fraction of ISO observing time was used to study the late stages of stellar evolution. Many molecular and solid state features, including crystalline silicates and the rotational lines of water vapour, were detected for the first time in the spectra of (post-)Asymptotic Giant Branch (AGB) stars. Their analysis has greatly improved our knowledge of stellar atmospheres and circumstellar environments. A surprising number of objects, particularly young planetary nebulae with Wolf-Rayet (WR) central stars, were found to exhibit emission features in their ISO spectra that are characteristic of both oxygen-rich and carbon-rich dust species, while far-IR observations of the PDR around NGC 7027 led to the first detections of the rotational line spectra of CH and CH⁺. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

化学气相渗透法制备碳化硅陶瓷复合材料

综述了化学气相渗透法制备连续纤维增强碳化硅陶瓷复合材料的过程，以及碳化硅陶瓷复合材料的性能及应用。     

利用高空科学气球收集宇宙尘粒

本文叙述了高空科学气球上一种自行研制的宇宙尘收集器以及气球吊篮系统。利用该系统进行了五次高空字宙尘粒的收集飞行,简述了对所收集的尘粒进行系统研究的结果。     

多孔陶瓷等效导热系数的近似计算

提出了一个近似计算多孔陶瓷等效导效系数的公式。该公式综合考虑了孔隙大小，孔隙度以及气相辐射与导热的影响，可用于在任意温度下具有任意孔隙度的多孔陶瓷的等效导热系数的计算，用文献数据检验表明，该公式在高温区有较高的计算精度。     

碳纤维增强陶瓷基复合材料抗氧化涂层研究进展

对碳纤维增强陶瓷材料抗氧化涂层的要求、组成与制备工艺以及最近抗氧化涂层体系的发展做了综述。并且对今后抗氧化涂层的发展作了一些展望。     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

Advances in fabrication of ceramic corundum abrasives based on sol–gel process

Corundum abrasives with good chemical stability can be fabricated into various free abrasives and bonded abrasive tools that are widely used in the precision machining of various parts. However, these abrasives cannot satisfy the machining requirements of difficult-to-machine materials with high hardness, high strength, and strong wearing resistance. Although superhard abrasives can machine the above-mentioned materials, their dressing and manufacturing costs are high. By contrast, ceramic corundum abrasives fabricated by sol–gel method is a cost-effective product between conventional and superhard abrasives. Ceramic corundum abrasives exhibit self-sharpening and high toughness. In this review, the optimization methods of ceramic corundum abrasive properties are introduced from three aspects: precursor synthesis, particle shaping, and sintering. Firstly, the functional mechanism of seeds and additives on the microstructural and mechanical properties of abrasives is analyzed. Specifically, seeds can reduce the phase transition temperature and improve fracture toughness. The grain size and uniformly dense structure can be controlled by applying an appropriate amount of multicomponent additives. Then, the urgent need of engineering application and machinability of special shape ceramic corundum abrasives is reviewed, and three methods of abrasive shaping are summarized. The micromold replication technique is highly advanced and can be used to prepare functional abrasives. Additionally, the influence of a new sintering method, namely, two-step sintering technique, on the microstructural and mechanical performance of ceramic corundum abrasives is summarized. Finally, the challenge and developmental trend of the optimization of ceramic corundum abrasives are prospected.     

可重复使用热防护材料应用与研究进展

可重复使用热防护系统是为高速重复使用飞行器而发展的关键性技术,涵盖了地球大气环境及非地球大气环境下的弹道式再入、高马赫数巡航等应用场景。根据现有高马赫数飞行器热防护现状,对高马赫数飞行器的主要热防护系统类型、特点和使用场景进行了简要介绍。在此基础上,结合国外里程碑式可重复使用飞行器（X-15、SR-71、航天飞机、X-33、X-37B、Spaceliner等）,梳理了可重复使用热防护材料的应用与研究进展,论述了代表性可重复使用热防护材料的发展、性能、研制进度、特点及应用前景。对国外在可重复使用热防护材料研制中的设计及发展思路,以及所存在的主要问题进行了总结归纳,为可重复使用热防护材料未来的发展提供了思路。     

不同分子量固态与液态聚碳硅烷的黏度特性

采用GPC、流变仪等分析手段对不同分子量的固态PCS和液态PCS的黏度进行表征.分析了PCS分子量、软化点及黏度特性之间的关系.此外还用热重法对固态和液态PCS陶瓷产率进行表征.结果表明,LPCS在室温黏度较低,陶瓷产率较高(77％),而固态PCS熔体在＞200℃具有较低黏度(500 mPa·s),因此LPCS更适于用作PIP法制备陶瓷基复合材料浸渍前驱体.     

风量与风机的安全运行

本文阐明了离心式通风机在通风除尘(或排毒净化)系统中的作用,以及离心式通风机产生风压.风量的工作工程,从而引出风机的性能参数风量L、风压P、功率N、效率η等.文章突出地论述了风量对风压、功率、效率的影响;详尽地分析了离心式通风机的性能曲线,特别是N—L曲线;根据性能曲线分析得知,风量L为零(L=0)时,风消耗的功率N最小.从而得出结论;系统中的离心式通风机必须是在关闭状态下启动,以确保通风机的安全运行.