Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

拉格朗日中值定理的一个新证法

本文给出了利用坐标旋转法证明拉格朗日中值定理的一种新方法。即从罗尔定理出发，采用坐标旋转法及隐函数、复合函数求导法则，证明拉格朗日中值定理，由于该证明方法从直观的几何意义入手，因此，其证明过程更加清晰、易懂。     

Investigation of the differential rotation of the large-scale magnetic elements for the solar activity cycles 20 and 21

The differential rotation of the patterns of the large-scale solar magnetic field during solar activity cycles 20 and 21 is investigated. Compact magnetic elements with the polarity of the general solar magnetic field have larger speed of rotation than the elements with the opposite polarity. The surface of the Sun was divided by 10°-zones. In all of them the average rotation rate of the magnetic elements with negative polarity is little higher than that of the magnetic elements with positive polarity, except for 50°-zone of the south hemisphere and at the 10° latitude of the north hemisphere.

The rates of differential rotation for large-scale magnetic elements with negative and positive polarities have similar behavior for both cycles of the solar activity.

The rotation rate varies at polarity reversal of the circumpolar magnetic fields. For the cycle No 20 in 1969–1970 the threefold reversal took place in the northern hemisphere and variations of rotation rate can be noticed for magnetic elements both with positive and negative polarity for each 10°-zone in the same hemisphere.     

正—反激组合式变换器与单端式变换器的比较

以５０Ｗ变换器为例，分别从磁性元件的大小，功率管上的电应力、磁恢复问题，输出纹波及输出特性等方面，详细分析比较了组合式变换器与单端式变换器的优缺点，并给出了具体数据，提出了正－反激组合式变换器具有电压应力低，磁性元件小，体积小，重量轻，输出纹波小及可靠性高的结论。     

镀膜光纤声光相位调制器频率响应特性的研究

本文对光纤声光相位调制器（OF—AOPM）的频率特性进行研究。分析了OF—AOPM的调相原理，研究结果表明：在调制频率远离氧化锌压电薄膜的半波谐振频率的时候，光相位的调制不仅依靠径向应力。同时还依靠轴向应力。通过同时考虑径向和轴向应力的变化，得出了OF—AOPM在整个频率域范围内的响应特性。     

基于FM-AM转换的伪码调相-载波调频复合引信信号的脉内特征提取研究

伪码调相和载波调频复合信号因具有好的距离、速度分辨率和测速测距精度,所以广泛应用在雷达和引信中。在电子对抗中为了实施欺骗性干扰,必须有效地提取复合信号的参数特征,为此本文研究了FM-AM转换时频分析的理论及其实现方法,并利用该方法对伪码调相-载波调频复合信号进行了脉内特征分析。具体包括伪码调相正弦载波信号、伪码调相复合正弦调频信号及伪码调相复合线性调频信号。仿真结果表明,在信噪比为5dB时,利用FM-AM转换时频分析技术,不但可以提取载波调频的特征信息,而且能够有效提取伪码的特征信息。     

一种基于误差四元数的战术导弹垂直发射姿态调转控制器

针对战术导弹垂直发射姿态调转时的快速性要求，研究了垂直发射快速姿态调转的控制问题。首先基于误差四元数并结合垂直发射的具体特点，建立了战术导弹垂直发射的非线性数学模型；然后通过李亚普诺夫第二方法进行控制系统设计，得出了基于误差四元数反馈控制器。分析了系统的稳定性和鲁棒性。该控制器实现了绕欧拉特征轴的旋转，缩短了姿态调转的时间，最后通过仿真验证其有效性。     

伪码调相与PAM复合测距系统研究

介绍了PAM伪随机码的构成原理,推导了PAM伪随机码的自相关函数和功率谱密度。结合图形分析了它们的性质特点。设计了伪码调相与PAM复合测距系统,并分析了在加性高斯白噪声信道中的各个阶段的信号形式。研究了复合测距系统的性能,详细推导了复合测距系统的信噪比增益。结果表明,与单纯的伪码测距系统相比,复合测距系统有更强的抗干扰性能和测距能力。     

谐振腔光纤陀螺频率调制原理及仿真

简述对谐振腔光纤陀螺入射光进行频率调制的基本方法，采用洛仑兹公式来描述光纤陀螺的传递函数，结合输入信号特征，建立其频域的数学模型，最后给出结果和相关仿真图形，以及关键参数的优化值和优化方向，再对全光路的结构提出具体的配置建议，仿真结果表明，谐振腔光纤陀螺具有良好的线性工作区间，精度也能够得到进一步的提高。     

基于回转体CAD/CAPP结构的图形文件OpenGL处理技术研究

在计算机辅助车削加工自动编程系统中,利用CAD软件系统输入图形,并通过应用程序对其文件格式进行转化,变成CAPP模块所需的基于特征的数据结构。