Modelling of Ejecta as a Space Debris Source

When a micro-debris or a micrometeoroid impacts a spacecraft surface, a large number of secondary particles, called ejecta, are produced. These particles can contribute to a modification of the debris environment: either locally by the occurrence of secondary impacts on the components of complex and large space structures, or at great distance by the formation of a population of small orbital debris. This paper describes firstly, the ejecta overall production, and secondly, the lifetime and the orbital evolution of the particles. Finally the repartition of ejecta in LEO is computed. Some results describing the population as a function of size and altitude are presented.     

空战机动动作库设计方式研究

具体阐述了两类常见空战动作库的设计 :典型战术动作库和基本操作动作库 ,详细分析了这两类空战机动动作库的不足 ,最后提出了改进动作库设计的具体意见和建议。     

一种在线神经网络在补偿飞机模型不确定性误差中的应用

讨论了一种基于神经网络动态逆的直接自适应控制方法，并应用于超机动飞机的飞行控制中。基本控制律采用非线性动态逆方法进行设计，对由于模型不准确导致的逆误差采用单隐层神经网络进行在线补偿。仿真结果表明，神经网络通过补偿由于模型不准确引起的逆误差，弥补了非线性动态逆要求精确数学模型的缺点，提高了整个控制系统的鲁棒性，而且可以大大简化动态逆控制律的设计。     

Collision Risk Mitigation in Geostationary Orbit

The short- and long-term effects of spacecraft explosions, as a function of the end-of-life re-orbit altitude above the geostationary orbit (GEO), were analyzed in terms of their additional contribution to the debris flux in the GEO ring. The simulated debris clouds were propagated for 72yrs, taking into account all the relevant orbital perturbations.The results obtained show that 6–7 additional explosions in GEO would be sufficient, in the long term, to double the current collision risk with sizable objects in GEO. Unfortunately, even if spacecraft were to re-orbit between 300 and 500km above GEO, this would not significantly improve the situation. In fact, an altitude increase of at least 2000km would have to be adopted to reduce by one order of magnitude the long-term risk of collision among geostationary satellites and explosion fragments. The optimal debris mitigation strategy should be a compromise between the reliability and effectiveness of spacecraft end-of-life passivation, the re-orbit altitude and the acceptable debris background in the GEO ring. However, for as long as the re-orbit altitudes currently used are less than 500km above GEO, new spacecraft explosions must be avoided in order to preserve the geostationary environment over the long term.     

一种基于误差四元数的战术导弹垂直发射姿态调转控制器

针对战术导弹垂直发射姿态调转时的快速性要求，研究了垂直发射快速姿态调转的控制问题。首先基于误差四元数并结合垂直发射的具体特点，建立了战术导弹垂直发射的非线性数学模型；然后通过李亚普诺夫第二方法进行控制系统设计，得出了基于误差四元数反馈控制器。分析了系统的稳定性和鲁棒性。该控制器实现了绕欧拉特征轴的旋转，缩短了姿态调转的时间，最后通过仿真验证其有效性。     

轮控小卫星姿态大角度机动递阶饱和控制器设计

针对采用反作用飞轮的小卫星姿态大角度机动控制，在反作用轮输出力矩受限、速率饱和的约束条件下，采用递阶饱和方法，即限制卫星每次姿态机动的最大偏差，对姿态偏差进行逐次消除。在毋需获知最优机动轨迹规划的情况下，可用于卫星任意时刻的姿态捕获和机动控制。数学仿真结果表明，本文设计的控制算．去能够实现快速姿态机动任务，具有良好的鲁棒性。     

翼伞雀降技术

雀降是翼伞的一种重要性能,在本质上是一种小心操纵的动力失速,使回收系统以最小的速度着陆,降低着陆冲击,实现定点着陆。文章简要介绍了翼伞雀降技术的概念、雀降的典型过程和影响雀降性能的主要因素。目前有限元模拟技术已经用于大型冲压翼伞的雀降技术研究中。随着回收载荷和空投物质量的增加,原来用于翼伞雀降的伺服机构已不再适用,各国正在寻找新的动力源或方法来实现自动雀降。     

远程导引可行飞行方案寻求算法研究

提出了一种寻求远程导引可行飞行方案的算法，能够满足远程导引对测控、日照、燃料和时间等各方面的要求；重点论述了Lambert一次变轨方案，给出了算法的具体步骤和主要模块的实现方法；最后给出了一个算例，说明算法是切实可行的。     

直升机机动飞行逆仿真技术研究进展

回顾了直升机机动飞行逆仿真技术国内外发展概况，借鉴国内外的研究成果，针对逆仿真核心技术的发展现状进行了分析和讨论，在此基础上，对直升机机动飞行逆仿真技术的进一步发展趋势进行了分析。     

气动/推力矢量控制面融合方式研究

针对在过失速机动中气动/推力矢量控制面协调问题,分析了最小控制能量和链式递增两种典型控制面融合方式的特点.结合实际应用上存在的问题,提出了一种新的融合控制方式.通过仿真计算和分析,并与典型的链式递增融合方式进行比较后可知,这种新的控制方式改善了采用链式递增融合控制方式中气动舵面的振荡现象.并且与最小控制能量融合方式相比更具有实用性.