太阳能飞机循环飞行的高度剖面能量策略

为满足设定的太阳能飞机多日连续飞行条件，依据飞行过程中当前时刻的飞行高度、光伏输出功率、动力电池组余量等系统状态参数，研究如何分配动力电池组充放电和电推进系统输入等功率。所用策略立足于实时功率平衡，充分利用正午前后的光伏峰值功率用于飞机爬升及充电，在午后下滑过程中利用全部光伏输出，以最大化利用光伏资源；在光伏有效输出不足时则以一定的维持功率下滑，使能量的综合损失最小。方法能够提高以预定夜间飞行高度连续多日续航的成功率，提升飞行高度、纬度、季节范围或搭载能力，或者拓展这几种飞行条件的组合域，优化太阳能飞机的适用性。     

High energy-density propulsion—reducing the risk to humans in planetary exploration

The potential benefits to humankind of space exploration are tremendous. Space is not only the final frontier but is also the next marketplace. The orbital space above Earth offers tremendous opportunities for both strategic assets and commercial development. The critical obstacle retarding the use of the space around the Earth is the lack of low cost access to orbit. Further out, the next giant leap for mankind will be the human exploration of Mars. Almost certainly within the next 30 years, a human crew will brave the isolation, the radiation, and the lack of gravity to walk on and explore the Red planet. Both of these missions will change the outlook and perspective of every human being on the planet. However, these missions are expensive and extremely difficult. Chemical propulsion has demonstrated an inability to achieve orbit cheaply and is a very high-risk option to accomplish the Mars mission. An alternative solution is to develop a high performance propulsion system. Nuclear propulsion has the potential to be such a system. The question will be whether humanity is willing to take on the challenge.     

EUROPEAN NETWORK FOR THE NUMERICAL SIMULATION OF SPACE PLASMAS

The Cluster mission of the European Space Agency (ESA) will allow, for the first time three-dimensional measurements in key regions of the Earth's magnetosphere to be carried out. The European Numerical Simulation Network (ENSN) aims at providing a theoretical support to the mission. We describe the achievements of the ENSN during its first period of activity 1991–1994, during which the network was funded by the European Union. In particular, the ENSN has set up (i) thematic Working Groups on the prime scientific goals of the mission, (ii) a code development Working Group to develop numerical simulation codes specifically adapted to studying magnetospheric boundaries and the corresponding scale mixing, and (iii) software models of Cluster instruments to test in a numerical simulation what the set of four instruments will measure.     

Scientific Planning and Commanding of the Rosetta Payload

ESA’s Rosetta mission was launched in March 2004 and is on its way to comet 67P/Churyumov-Gerasimenko, where it is scheduled to arrive in summer 2014. It comprises a payload of 12 scientific instruments and a Lander. All instruments are provided by Principal Investigators, which are responsible for their operations. As for most ESA science missions, the ground segment of the mission consists of a Mission Operations Centre (MOC) and a Science Operations Centre (SOC). While the MOC is responsible for all spacecraft-related aspects and the final uplink of all command timelines to the spacecraft, the scientific operations of the instruments and the collection of the data and ingestion into the Planetary Science Archive are coordinated by the SOC. This paper focuses on the tasks of the SOC and in particular on the methodology and constraints to convert the scientific goals of the Rosetta mission to operational timelines.     

某武器装备上设备可靠性增长试验技术问题

某武器装备上的设备是全新研制的,并采用了许多新技术,可靠性偏低。为解决这一问题,除了开展可靠性设计外,还必须开展可靠性增长试验。文章依据国军标相关标准,并结合该产品特点,提出了做好可靠性增长方案的几个步骤,绘出了设备可靠性增长计划曲线,同时给出了可靠性增长试验剖面,阐述了试验监控与结果评估方法。     

飞机空中加油任务剖面优化设计

介绍了某型飞机执行作战任务途中何时进行空中加油，并按照最大航程截击对飞机各个飞行任务段的飞行性能进行了计算，得出了最佳巡航速度，确定了最优的加油时机和加油量。计算过程中采用了遗传算法，考虑了爬升过程和巡航过程中飞机变质量的难点问题，提高了计算结果的可信度。     

大传动比摆线针轮减速机的改进齿形

本文提出采用适当参数的短幅外摆线的等距线替代产生自交的短幅外摆线的等距线或复合齿形作为摆线轮的齿形,以便于既能够保持复合齿形提高效率的目的,又能够简化工艺,提高工效,同时满足摆线齿的修形要求,增大齿顶强度,使啮合传动平稳。文中还给出了一种机型的计算结果和放大的图样。     

飞机性能优化研究

本文用能量状态近似法和奇异摄动法两件方法讨论了最优飞行剖面的生成.并以某机为例,用能量状态近似法求出了给定航程下的最优飞行剖面和给定初、末状态的爬升飞行剖面;为了对两种方法比较,也给出了奇异摄动法求得的爬升剖面.     

风洞模拟近地面大气边界层

本文通过大气边界层风洞的模拟实验，介绍一种在风洞中模拟近地面大气边界层的方法。根据大风地区的现场实测资料，对大气的风剖面及湍流度等有关参数，提出了一些特殊的要求。常规的模拟方法难以保证与实际风环境的相似，为此专门研制了一种在保证平均风剖面相似的前提下，可使气流产生大湍流度的装置，简称湍流度调节器。通过对模拟边界层的平均风速，湍流度及风速谱的测量分析，证明与实际风区大风环境的风结构相当一致。为解决实     

风洞试验中风剖面的模拟及近流场特性分析

首先简单介绍了日本东京工艺大学风工程研究中心新建的开环流低速边界层风洞中风剖面模拟的试验情况.基于试验结果,采用被广泛应用的三角尖劈加上布置粗糙元的方法,成功地模拟出日本建筑学会定义的四类不同场地对应的风剖面.通过对试验数据的比较分析,就所采用的立方体粗糙元及三角尖劈对最终模拟得到的风剖面特性的影响进行了比较分析.其次,对风剖面模拟及特性判定中的几个重要问题,如三角尖劈的形状优化、风速功率谱的一致性、积分尺度的分析方法等进行了分析.最后,基于以上分析,对在边界层风洞中模拟预定的风剖面提出几点参考意见.